ElphelWiki - User contributions [en]

Adding crond

2010-11-30T18:55:10Z

Fortuitous:

=Adding the Cron Scheduler Daemon into 8.X=
By: Philip Carinhas http://fortuitous.com

== Synopsis: This covers the Installation of Cron Daemon into the Elphel353 using the 8.X firmware ==

I. Introduction

Crond and crontab are part of busybox in the Axis embedded distro. 
Activating these is easy, but you need to add a few extra ingredients 
to complete the process.
* Much of this was adapted from http://foxlx.acmesystems.it/?id=58

II. Installation:

0. Set some environment vars:

<root@cam>: AXIS_TOP_DIR=/path/to/your/elphel-dev-kit-base
<root@cam>: cd $AXIS_TOP_DIR

1. Go into the busybox area (which is where crond is integrated)
<root@cam>: cd packages/apps/busybox

2. configure crond and crontab in busybox:

<root@cam>: make menuconfig
==> Miscellaneous Utilities
--> Select Crond
--> Select Crontab
--> exit, exit, save when asked

3. This config isn't the real one, you must copy it into busyboxconfig to make it stick:

<root@cam>: diff .config busyboxconfig
<root@cam>: cp .config busyboxconfig

4a. Now add the init script in the SDK to create the right directory inside the FOX fimage end the script to start and stop the crond daemon. 
Go in the packages/initscripts folder and create a folder named crond:

<root@cam>: cd $AXIS_TOP_DIR/packages/initscripts
<root@cam>: mkdir crond
<root@cam>: cd crond

4b. Now copy inside it these files: rc, conf, Makefile as follows:
* Please Note: we've added an extra line in Makefile to touch the config files which differs from the example in http://foxlx.acmesystems.it/?id=58
 First we'll make these files with cat:

<pre>
<root@cam>: cat << ENDOFIT > rc
#! /bin/sh

. /etc/init.d/functions.sh
. /etc/conf.d/crond

case "$1" in
start)
begin "Starting crond"
crond $CROND_OPTIONS
end $?
;;
stop)
begin "Stopping crond"
killall crond
end $?
;;
*)
error "Usage: $0 start|stop"
;;
esac
ENDOFI
</pre>

<pre>
<root@cam>: cat << ENDOFIT > conf
CROND_OPTIONS=""
ENDOFIT
</pre>

* Note: On this next one: Make sure that the following has TABS in the indented lines or "make" will fail! I've tried to cut-and-paste these linesto check for consistency, but its not 100% accurate. Depends on your editor.

<pre>
<root@cam>: cat << ENDOFIT > Makefile
include \$(AXIS_TOP_DIR)/tools/build/Rules.axis

OWN = -o root -g root

install:
\$(INSTALL) \$(OWN) -m 0755 rc "\$(prefix)"/etc/init.d/crond
\$(INSTALL) \$(OWN) -m 0644 conf "\$(prefix)"/etc/conf.d/crond
\$(LN) -sf ../init.d/crond "\$(prefix)"/etc/rc0.d/K90crond
\$(LN) -sf ../init.d/crond "\$(prefix)"/etc/rc1.d/K90crond
\$(LN) -sf ../init.d/crond "\$(prefix)"/etc/rc2.d/K90crond
\$(LN) -sf ../init.d/crond "\$(prefix)"/etc/rc3.d/S90crond
\$(LN) -sf ../init.d/crond "\$(prefix)"/etc/rc4.d/S90crond
\$(LN) -sf ../init.d/crond "\$(prefix)"/etc/rc5.d/K15crond
\$(LN) -sf ../init.d/crond "\$(prefix)"/etc/rc6.d/K15crond

mkdir "\$(prefix)"/var/spool
mkdir "\$(prefix)"/var/spool/cron
mkdir "\$(prefix)"/mnt/flash/crontabs
touch "\$(prefix)"/mnt/flash/crontabs/root

\$(LN) -sf /mnt/flash/crontabs "\$(prefix)"/var/spool/cron/crontabs
ENDOFIT
</pre>

5. Go back to the SDK root folder and edit the main Makefile.
<root@cam>: cd $AXIS_TOP_DIR
<root@cam>: vi Makefile
-> Search for SUBDIRS list:
-> Add "packages/initscripts/crond" to end of list
-> You will have to add a continuation backslash to the prior line

6. Make the image as usual:
<root@cam>: make (or use Kdevelop)

7. FBI WARNING: since there is no Mail services on elphel, all stderr and stdout must be handled in your crontab. Otherwise crond can fail, certainly your scripts will fail.

<pre>
<root@cam>: cat << ENDOFIT > ~/root.cron
# Sample crontab file
*/2 * * * * /bin/echo "cron is good" >> /mnt/flash/root/cron_check.out 2>&1
ENDOFIT
</pre>

8. Now test:

<root@cam>: crontab root.cron
<root@cam>: crontab -l

Adding crond

2010-11-30T18:49:41Z

Fortuitous: /* Adding Cron Daemon */

=Adding the Cron Scheduler Daemon into 8.X=

== Synopsis: This covers the Installation of Cron Daemon into the Elphel353 using the 8.X firmware ==

I. Introduction

Crond and crontab are part of busybox in the Axis embedded distro. 
Activating these is easy, but you need to add a few extra ingredients 
to complete the process.
* Much of this was adapted from http://foxlx.acmesystems.it/?id=58

II. Installation:

0. Set some environment vars:

<root@cam>: AXIS_TOP_DIR=/path/to/your/elphel-dev-kit-base
<root@cam>: cd $AXIS_TOP_DIR

1. Go into the busybox area (which is where crond is integrated)
<root@cam>: cd packages/apps/busybox

2. configure crond and crontab in busybox:

<root@cam>: make menuconfig
==> Miscellaneous Utilities
--> Select Crond
--> Select Crontab
--> exit, exit, save when asked

3. This config isn't the real one, you must copy it into busyboxconfig to make it stick:

<root@cam>: diff .config busyboxconfig
<root@cam>: cp .config busyboxconfig

4a. Now add the init script in the SDK to create the right directory inside the FOX fimage end the script to start and stop the crond daemon. 
Go in the packages/initscripts folder and create a folder named crond:

<root@cam>: cd $AXIS_TOP_DIR/packages/initscripts
<root@cam>: mkdir crond
<root@cam>: cd crond

4b. Now copy inside it these files: rc, conf, Makefile as follows:
* Please Note: we've added an extra line in Makefile to touch the config files which differs from the example in http://foxlx.acmesystems.it/?id=58
 First we'll make these files with cat:

<pre>
<root@cam>: cat << ENDOFIT > rc
#! /bin/sh

. /etc/init.d/functions.sh
. /etc/conf.d/crond

case "$1" in
start)
begin "Starting crond"
crond $CROND_OPTIONS
end $?
;;
stop)
begin "Stopping crond"
killall crond
end $?
;;
*)
error "Usage: $0 start|stop"
;;
esac
ENDOFI
</pre>

<pre>
<root@cam>: cat << ENDOFIT > conf
CROND_OPTIONS=""
ENDOFIT
</pre>

* Note: On this next one: Make sure that the following has TABS in the indented lines or "make" will fail! I've tried to cut-and-paste these linesto check for consistency, but its not 100% accurate. Depends on your editor.

<pre>
<root@cam>: cat << ENDOFIT > Makefile
include \$(AXIS_TOP_DIR)/tools/build/Rules.axis

OWN = -o root -g root

install:
\$(INSTALL) \$(OWN) -m 0755 rc "\$(prefix)"/etc/init.d/crond
\$(INSTALL) \$(OWN) -m 0644 conf "\$(prefix)"/etc/conf.d/crond
\$(LN) -sf ../init.d/crond "\$(prefix)"/etc/rc0.d/K90crond
\$(LN) -sf ../init.d/crond "\$(prefix)"/etc/rc1.d/K90crond
\$(LN) -sf ../init.d/crond "\$(prefix)"/etc/rc2.d/K90crond
\$(LN) -sf ../init.d/crond "\$(prefix)"/etc/rc3.d/S90crond
\$(LN) -sf ../init.d/crond "\$(prefix)"/etc/rc4.d/S90crond
\$(LN) -sf ../init.d/crond "\$(prefix)"/etc/rc5.d/K15crond
\$(LN) -sf ../init.d/crond "\$(prefix)"/etc/rc6.d/K15crond

mkdir "\$(prefix)"/var/spool
mkdir "\$(prefix)"/var/spool/cron
mkdir "\$(prefix)"/mnt/flash/crontabs
touch "\$(prefix)"/mnt/flash/crontabs/root

\$(LN) -sf /mnt/flash/crontabs "\$(prefix)"/var/spool/cron/crontabs
ENDOFIT
</pre>

5. Go back to the SDK root folder and edit the main Makefile.
<root@cam>: cd $AXIS_TOP_DIR
<root@cam>: vi Makefile
-> Search for SUBDIRS list:
-> Add "packages/initscripts/crond" to end of list
-> You will have to add a continuation backslash to the prior line

6. Make the image as usual:
<root@cam>: make (or use Kdevelop)

7. FBI WARNING: since there is no Mail services on elphel, all stderr and stdout must be handled in your crontab. Otherwise crond can fail, certainly your scripts will fail.

<pre>
<root@cam>: cat << ENDOFIT > ~/root.cron
# Sample crontab file
*/2 * * * * /bin/echo "cron is good" >> /mnt/flash/root/cron_check.out 2>&1
ENDOFIT
</pre>

8. Now test:

<root@cam>: crontab root.cron
<root@cam>: crontab -l

Adding crond

2010-11-30T17:07:22Z

Fortuitous: Created page with "=Adding Cron Daemon= Installation of Cron Daemon into the Elphel353 Philip Carinhas Fortuitous Technologies Inc http://fortuitous.com I. Introduction Crond and cro..."

=Adding Cron Daemon=
Installation of Cron Daemon into the Elphel353

Philip Carinhas 
Fortuitous Technologies Inc 
http://fortuitous.com 

I. Introduction

Crond and crontab are part of busybox in the Axis embedded distro. 
Activating these is easy, but you need to add a few extra ingredients 
to complete the process.
* Much of this was adapted from http://foxlx.acmesystems.it/?id=58

II. Installation:

0. Set some environment vars:

<root@cam>: AXIS_TOP_DIR=/path/to/your/elphel-dev-kit-base
<root@cam>: cd $AXIS_TOP_DIR

1. Go into the busybox area (which is where crond is integrated)
<root@cam>: cd packages/apps/busybox

2. configure crond and crontab in busybox:

<root@cam>: make menuconfig
==> Miscellaneous Utilities
--> Select Crond
--> Select Crontab
--> exit, exit, save when asked

3. This config isn't the real one, you must copy it into busyboxconfig to make it stick:

<root@cam>: diff .config busyboxconfig
<root@cam>: cp .config busyboxconfig

4a. Now add the init script in the SDK to create the right directory inside the FOX fimage end the script to start and stop the crond daemon. 
Go in the packages/initscripts folder and create a folder named crond:

<root@cam>: cd $AXIS_TOP_DIR/packages/initscripts
<root@cam>: mkdir crond
<root@cam>: cd crond

4b. Now copy inside it these files: rc, conf, Makefile as follows:
* Please Note: we've added an extra line in Makefile to touch the config files which differs from the example in http://foxlx.acmesystems.it/?id=58
 First we'll make these files with cat:

<pre>
<root@cam>: cat << ENDOFIT > rc
#! /bin/sh

. /etc/init.d/functions.sh
. /etc/conf.d/crond

case "$1" in
start)
begin "Starting crond"
crond $CROND_OPTIONS
end $?
;;
stop)
begin "Stopping crond"
killall crond
end $?
;;
*)
error "Usage: $0 start|stop"
;;
esac
ENDOFI
</pre>

<pre>
<root@cam>: cat << ENDOFIT > conf
CROND_OPTIONS=""
ENDOFIT
</pre>

* Note: On this next one: Make sure that the following has TABS in the indented lines or "make" will fail! I've tried to cut-and-paste these linesto check for consistency, but its not 100% accurate. Depends on your editor.

<pre>
<root@cam>: cat << ENDOFIT > Makefile
include \$(AXIS_TOP_DIR)/tools/build/Rules.axis

OWN = -o root -g root

install:
\$(INSTALL) \$(OWN) -m 0755 rc "\$(prefix)"/etc/init.d/crond
\$(INSTALL) \$(OWN) -m 0644 conf "\$(prefix)"/etc/conf.d/crond
\$(LN) -sf ../init.d/crond "\$(prefix)"/etc/rc0.d/K90crond
\$(LN) -sf ../init.d/crond "\$(prefix)"/etc/rc1.d/K90crond
\$(LN) -sf ../init.d/crond "\$(prefix)"/etc/rc2.d/K90crond
\$(LN) -sf ../init.d/crond "\$(prefix)"/etc/rc3.d/S90crond
\$(LN) -sf ../init.d/crond "\$(prefix)"/etc/rc4.d/S90crond
\$(LN) -sf ../init.d/crond "\$(prefix)"/etc/rc5.d/K15crond
\$(LN) -sf ../init.d/crond "\$(prefix)"/etc/rc6.d/K15crond

mkdir "\$(prefix)"/var/spool
mkdir "\$(prefix)"/var/spool/cron
mkdir "\$(prefix)"/mnt/flash/crontabs
touch "\$(prefix)"/mnt/flash/crontabs/root

\$(LN) -sf /mnt/flash/crontabs "\$(prefix)"/var/spool/cron/crontabs
ENDOFIT
</pre>

5. Go back to the SDK root folder and edit the main Makefile.
<root@cam>: cd $AXIS_TOP_DIR
<root@cam>: vi Makefile
-> Search for SUBDIRS list:
-> Add "packages/initscripts/crond" to end of list
-> You will have to add a continuation backslash to the prior line

6. Make the image as usual:
<root@cam>: make (or use Kdevelop)

7. FBI WARNING: since there is no Mail services on elphel, all stderr and stdout must be handled in your crontab. Otherwise crond can fail, certainly your scripts will fail.

<pre>
<root@cam>: cat << ENDOFIT > ~/root.cron
# Sample crontab file
*/2 * * * * /bin/echo "cron is good" >> /mnt/flash/root/cron_check.out 2>&1
ENDOFIT
</pre>

8. Now test:

<root@cam>: crontab root.cron
<root@cam>: crontab -l

Tutorials

2010-11-30T16:14:13Z

Fortuitous: /* Camera Development Tutorials */

==Camera Development Tutorials==
'''[[Arduino | Arduino and Elphel Camera Tutorial]]'''

* Use the Arduino and an infrared motion sensor to record video to camera internal storage if motion has been detected.
* Use the Arduino to build a still camera by triggering a full snapshot with a single button pressed.

'''[[Elphel_on_SourceForge| CVS on Sourceforge]]'''

Guide on how to contribute to the elphel sourcecode CVS tree hosted by sourceforge.

'''[[PHP_Examples| PHP Example Code]]'''

Look at a few examples on how to use the camera specific PHP functions and data structures.

'''[[Socket_Tutorial | Socket Communication Tutorial]]'''

The simplest way to exchange data between an Elphel camera and a host computer is with a simple C Programm sending and listing to socket communications.

'''[[understanding_camvc | How to: Add a new color mode to camvc in 7.X firmware (outdated)]]'''

This Tutorial describes the file structure and the way camvc works by adding a new feature to enable jp4 encoding mode required for "on client pixel demosaicing".

'''[[adding_crond | How to: Add Crond to 8.X firmware ]]'''

This Tutorial describes how to add the cron scheduling daemon to 8.X fireware".