ElphelWiki - User contributions [en]

User:Saint17

2015-10-29T09:53:17Z

Saint17: Blanked the page

Control Panel

2008-03-27T01:05:35Z

Saint17: /* General Tab */

The control panel is a new feature on the Elphel cameras that allows for:
*A quick scan of camera hardware & software status
*A separate report of camera hardware & software status can be generated, this can be sent to Elphel for the aid of troubleshooting the cameras or for personal use.

==Current Status==
This project is currently in BETA, and can be found at http://''camera address''/UI.html after reflashing with the [http://downloads.sourceforge.net/elphel/elphel353-7.1.7.10.tar.gz latest tarball]

The Control Panel can show the following information
*Camera IP address, Gateway, Broadcast Address, Netmask, and other network settings
*Camera Serial Number
*Camera Software Version
*Processes (Daemons) currently running on the camera
*FPGA info
*fpga_sdram_phase
*Cat_interupts

You can change the following network settings with the Control Panel
*Camera IP address
*Broadcast address
*Netmask
*Gateway

All of this information is included in a status report the camera is able to generate.
This report can be sent to Elphel support for help with troubleshooting.

This new version of the control panel will feature a tabbed interface and will be written with expansion and modularization in mind.
==Back-end==
The back-end will be a simple php script that calls functions and indexes them into a simple xml file, which is parsed by the javascript in the front-end.
==Front-end==
===General Tab===
The general tab will be the first seen (like the index) and will display general information, quickly accessed, including:

*Camera software:
**Camera IP address, netmask, browadcast, gateway & multicast address
**Date & Time
**Load average, ps
**Software version
**10353 FPGA code version, revision & information
**10359 FPGA code version, revision & information
**10347 FPGA code version, revision & information

*Camera hardware:
**Camera serial number (MAC address) and 10353 revision number, Manufacturing Date.
**Sensor model and revision
**Detected boards (10359, 10369, 10347, ...)
***If 10369 is detected, show connected hardware (df -h, CF, IDE HD, SATA HD, USB devices, temperature, ...)
***If 10359 is detected, try to detect cascaded 10359, try to detect other connected 10353, detect connected sensors

*Compiled camera status for bug reporting

* /*source inside*/ logo (links):
**source code on the camera
**the Axis developer wiki
**the Elphel website
**the Elphel wiki
**Sourceforge page
**Admin-bin built-in program

===Configuration Tab===
*Change the default application
*Add additional application
*Change Network Settings
*Change Date & Time
*Configure & set/unset NTP client
*Change root password & lighttpd password
*Set/unset daemon at boot
*Reboot the camera

===10359 board===
*Configure the default application of the 10359
*...

===10369 board===
*Configure thermometer/fan
*Configure kernel modules for additional hardware (USB, ...)
*Configure CF/IDE/SATA
*Configure camera synchronization
*Configure RS232 (console port or serial port and settings)
*Configure CMOS clock

===Help Tab===
The help tab will have some clarifications of the project, but will ''not'' be a substitute for good design.

===Other Changes===
*Confirm Changes Dialogue:
**A simple dialogue that confirms changes (alert) and an ajax-dynamic tab that lists changes (a hidden div)

===Suggestions===
Any suggestions for features or additional camera information you would like to see should be listed here.

This is a part of [[Project α]]

[[Category: Project α Projects]]
[[Category: Project α Growth: Sapling]]
[[Category: Project α Priority: High]]

Control Panel

2008-03-27T01:03:38Z

Saint17: /* General Tab */

The control panel is a new feature on the Elphel cameras that allows for:
*A quick scan of camera hardware & software status
*A separate report of camera hardware & software status can be generated, this can be sent to Elphel for the aid of troubleshooting the cameras or for personal use.

==Current Status==
This project is currently in BETA, and can be found at http://''camera address''/UI.html after reflashing with the [http://downloads.sourceforge.net/elphel/elphel353-7.1.7.10.tar.gz latest tarball]

The Control Panel can show the following information
*Camera IP address, Gateway, Broadcast Address, Netmask, and other network settings
*Camera Serial Number
*Camera Software Version
*Processes (Daemons) currently running on the camera
*FPGA info
*fpga_sdram_phase
*Cat_interupts

You can change the following network settings with the Control Panel
*Camera IP address
*Broadcast address
*Netmask
*Gateway

All of this information is included in a status report the camera is able to generate.
This report can be sent to Elphel support for help with troubleshooting.

This new version of the control panel will feature a tabbed interface and will be written with expansion and modularization in mind.
==Back-end==
The back-end will be a simple php script that calls functions and indexes them into a simple xml file, which is parsed by the javascript in the front-end.
==Front-end==
===General Tab===
The general tab will be the first seen (like the index) and will display general information, quickly accessed, including:

*Camera software:
**Camera IP address, netmask, browadcast, gateway & multicast address
**Date & Time
**Load average, ps
**Software version
**10353 FPGA code version, revision & information
**10359 FPGA code version, revision & information
**10347 FPGA code version, revision & information

*Camera hardware:
**Camera serial number (MAC address) and 10353 revision number
**Sensor model and revision
**Detected boards (10359, 10369, 10347, ...)
***If 10369 is detected, show connected hardware (df -h, CF, IDE HD, SATA HD, USB devices, temperature, ...)
***If 10359 is detected, try to detect cascaded 10359, try to detect other connected 10353, detect connected sensors

*Compiled camera status for bug reporting

* /*source inside*/ logo (links):
**source code on the camera
**the Axis developer wiki
**the Elphel website
**the Elphel wiki
**Sourceforge page
**Admin-bin built-in program

===Configuration Tab===
*Change the default application
*Add additional application
*Change Network Settings
*Change Date & Time
*Configure & set/unset NTP client
*Change root password & lighttpd password
*Set/unset daemon at boot
*Reboot the camera

===10359 board===
*Configure the default application of the 10359
*...

===10369 board===
*Configure thermometer/fan
*Configure kernel modules for additional hardware (USB, ...)
*Configure CF/IDE/SATA
*Configure camera synchronization
*Configure RS232 (console port or serial port and settings)
*Configure CMOS clock

===Help Tab===
The help tab will have some clarifications of the project, but will ''not'' be a substitute for good design.

===Other Changes===
*Confirm Changes Dialogue:
**A simple dialogue that confirms changes (alert) and an ajax-dynamic tab that lists changes (a hidden div)

===Suggestions===
Any suggestions for features or additional camera information you would like to see should be listed here.

This is a part of [[Project α]]

[[Category: Project α Projects]]
[[Category: Project α Growth: Sapling]]
[[Category: Project α Priority: High]]

Control Panel

2008-03-17T23:30:56Z

Saint17:

The control panel is a new feature on the Elphel cameras that allows for:
*A quick scan of camera hardware & software status
*A separate report of camera hardware & software status can be generated, this can be sent to Elphel for the aid of troubleshooting the cameras or for personal use.

==Current Status==
This project is currently in BETA, and can be found at http://''camera address''/UI.html after reflashing with the [http://downloads.sourceforge.net/elphel/elphel353-7.1.7.10.tar.gz latest tarball]

The Control Panel can show the following information
*Camera IP address, Gateway, Broadcast Address, Netmask, and other network settings
*Camera Serial Number
*Camera Software Version
*Processes (Daemons) currently running on the camera
*FPGA info
*fpga_sdram_phase
*Cat_interupts

You can change the following network settings with the Control Panel
*Camera IP address
*Broadcast address
*Netmask
*Gateway

All of this information is included in a status report the camera is able to generate.
This report can be sent to Elphel support for help with troubleshooting.

==Version 2==
This new version of the control panel will feature a tabbed interface and will be written with expansion and modularization in mind.
===Back-end===
The back-end will be a simple php script that calls functions and indexes them into a simple xml file, which is parsed by the javascript in the front-end.
===Front-end===
====General Tab====
The general tab will be the first seen (like the index) and will display general information, quickly accessed, including:
*Camera serial number
*Camera IP address
*Software version
*Date & Time
*FPGA information
*Sensor model and revision
*Board Type
*Compiled Camera Status (on expand)
*links:
**source code on the camera
**the Axis website
**the Elphel website
**Sourceforge page
**Admin-bin built-in program

====Configuration Tab====
*Change Network Settings
*Change Date & Time
*Restart Network Daemon
*Restart Camera
*Fan Control
*Drive Configuration

====Board Specific Tab====
The board specific tab will change on the type of board plugged in, and the type of developer board being used. It will have tabs and specific options for:
*359 developer's board
*353 developer's board
*369 developer's board

====Help Tab====
The help tab will have some clarifications of the project, but will ''not'' be a substitute for good design.

====Other Changes====
*Confirm Changes Dialogue:
**A simple dialogue that confirms changes (alert) and an ajax-dynamic tab that lists changes (a hidden div)

====Suggestions====
Any suggestions for features or additional camera information you would like to see should be listed here.

This is a part of [[Project α]]

[[Category: Project α Projects]]
[[Category: Project α Growth: Sapling]]
[[Category: Project α Priority: High]]

Control Panel

2008-03-17T23:12:43Z

Saint17:

The control panel is a new feature on the Elphel cameras that allows for:
*A quick scan of camera hardware & software status
*A separate report of camera hardware & software status can be generated, this can be sent to Elphel for the aid of troubleshooting the cameras or for personal use.

==Current Status==
This project is currently in BETA, and can be found at http://''camera address''/UI.html after reflashing with the [http://downloads.sourceforge.net/elphel/elphel353-7.1.7.10.tar.gz latest tarball]

The Control Panel can show the following information
*Camera IP address, Gateway, Broadcast Address, Netmask, and other network settings
*Camera Serial Number
*Camera Software Version
*Processes (Daemons) currently running on the camera
*FPGA info
*fpga_sdram_phase
*Cat_interupts

You can change the following network settings with the Control Panel
*Camera IP address
*Broadcast address
*Netmask
*Gateway

All of this information is included in a status report the camera is able to generate.
This report can be sent to Elphel support for help with troubleshooting.

==Version 2==
This new version of the control panel will feature a tabbed interface and will be written with expansion and modularization in mind.
===Back-end===
The back-end will be a simple php script that calls functions and indexes them into a simple xml file, which is parsed by the javascript in the front-end.
===Front-end===
====General Tab====
The general tab will be the first seen (like the index) and will display general information, quickly accessed, including:
*Camera serial number
*Camera IP address
*Software version
*Date & Time
*Sensor model and revision
*Board Type
*Compiled Camera Status (on expand)
*links:
**source code on the camera
**the Axis website
**the Elphel website
**Sourceforge page
**Admin-bin built-in program

====Configuration Tab====
*Change Network Settings
*Change Date & Time
*Restart Network Daemon
*Restart Camera
*Fan Control
*Drive Configuration

====Board Specific Tab====
The board specific tab will change on the type of board plugged in, and the type of developer board being used. It will have tabs and specific options for:
*359 developer's board
*353 developer's board
*369 developer's board

====Help Tab====
The help tab will have some clarifications of the project, but will ''not'' be a substitute for good design.

====Other Changes====
*Confirm Changes Dialogue:
**A simple dialogue that confirms changes (alert) and an ajax-dynamic tab that lists changes (a hidden div)

====Suggestions====
Any suggestions for features or additional camera information you would like to see should be listed here.

This is a part of [[Project α]]

[[Category: Project α Projects]]
[[Category: Project α Growth: Sapling]]
[[Category: Project α Priority: High]]

Control Panel

2008-03-17T22:19:35Z

Saint17:

Control Panel

2008-03-17T22:07:49Z

Saint17:

The control panel is a new feature on the Elphel cameras that allows for:
*A quick scan of camera hardware & software status
*A separate report of camera hardware & software status can be generated, this can be sent to Elphel for the aid of troubleshooting the cameras or for personal use.

==Current Status==
This project is currently in BETA, and can be found at http://''camera address''/UI.html after reflashing with the [http://downloads.sourceforge.net/elphel/elphel353-7.1.7.10.tar.gz latest tarball]

The Control Panel can show the following information
*Camera IP address, Gateway, Broadcast Address, Netmask, and other network settings
*Camera Serial Number
*Camera Software Version
*Processes (Daemons) currently running on the camera
*FPGA info
*fpga_sdram_phase
*Cat_interupts

You can change the following network settings with the Control Panel
*Camera IP address
*Broadcast address
*Netmask
*Gateway

All of this information is included in a status report the camera is able to generate.
This report can be sent to Elphel support for help with troubleshooting.

==Version 2==
This new version of the control panel will feature a tabbed interface and will be written with expansion and modularization in mind.
===General Tab===
This will include:
**Camera serial number
**Camera IP address
**Software version
**Date & Time
**Sensor model and revision
**Board Type
**Compiled Camera Status (on expand)
**links to the source code on the camera
**links to the Axis website
**links to the Elphel website
**links to Sourceforge page
**links to the Admin-bin built-in program

===Configuration Tab===
**Change Network Settings
**Change Date & Time
**Restart Network Daemon

===Board Specific Tab===

===Help Tab===

===Other Changes===

==TODO==
* Elphel support email and other contact information on the page
* Verification of IP and other settings before they are set
* A disclaimer
* Fix Camera reboot function, include timer for reboot.
* Main menu links after restart
* Create restart network daemon function
* Tab interface
* Create a copy-to-clipboard function for the camera summary
* Create notification pages for the change network settings functions
* Select all function for status reports
* Clean up some of the output information
* Clean up visual styles in general

==Suggestions==
Any suggestions for features or additional camera information you would like to see should be listed here.

This is a part of [[Project α]]

[[Category: Project α Projects]]
[[Category: Project α Growth: Sapling]]
[[Category: Project α Priority: High]]

2008-01-29T23:04:16Z

Saint17: /* Current Status */

Control Panel

2008-01-29T23:03:25Z

Saint17: /* Current Status */

Control Panel

2008-01-29T23:02:26Z

Saint17:

Phone interface/control

2008-01-29T22:52:11Z

Saint17: /* Summary */

==Summary==
Create a camera interface to be used on phones and other mobile devices. Initially web based but possibly changed to a Windows mobile or Java program that can be installed on the device.

==Development Ideas==
*Web-Based
**It's probably best to begin by modifying [[Control Panel]] to have a special way of displaying on mobile devices and once that's done start adding more specialized features for the mobile and branch off from there.

*Mobile Program
**A Java program is probably the best way to approach this as so many PDAs and Phones have Java
**Windows Mobile is also a good platform to use because of how wildly it is used on PDAs and Smartphones
**Apple is supposedly releasing and iPhone SDK a special interface for the iPhone could be developed later with this

This is part of [[Project α]]

Control Panel

2008-01-29T22:38:57Z

Saint17:

2008-01-28T22:25:18Z

Saint17:

Phone interface/control

2008-01-28T20:32:49Z

Saint17: