Prod353

2009-04-08T23:14:21Z

Vsouthwick:

2008-12-08T21:53:03Z

Vsouthwick: /* 0353-98-03 - screw, M2.5, Flat cap, l=12mm */

== Camera Assemblies ==
=== NC353L ===
{| border="0" cellpadding="2"
|-
| [[Image:NC353L-assy.jpeg|thumb|NC353L Camera Assembly]] ||
{| border="1" cellpadding="1"
|-
| part# || quantity
|-
| 0353-00-01 || 1
|-
| 0353-00-06 || 1
|-
| 0353-01-01 || 1
|-
| 0353-10-02 || 1
|-
| 0353-11-01 || 1
|-
| 0353-12-01 || 1
|-
| 0353-13-02 || 1
|-
| 0353-17-01 || 1
|-
| 0353-17-03 || 1
|-
| 0353-18-01 || 1
|-
| 0353-18-05 || 1
|-
| 0353-18-06 || 1
|-
| 0353-20-01 || 4
|-
| 0353-30-01 || 2
|-
| 0353-70-01 || 1
|-
| 0353-96-01 || 4
|-
| 0353-97-01 || 4
|-
| 0353-98-01 || 11
|-
| 0353-98-02 || 4
|-
| 0353-99-01 || 4
|-
|}
|-
|}

=== NC353L with 10369A and two CF cards ===
{| border="0" cellpadding="2"
|-
| [[Image:10353-10369-assy.jpeg|thumb|NC353L with 10369A Camera Assembly]] [[Image:10353-10369-assy_blowup.jpeg|thumb|NC353L with 10369A Parts]] ||
{| border="1" cellpadding="1"
|-
| part# || quantity
|-
| 0353-00-01 || 1
|-
| 0353-00-02 || 1
|-
| 0353-00-03 || 1
|-
| 0353-00-04 || 1
|-
| 0353-00-06 || 1
|-
| 0353-00-07 || 1
|-
| 0353-01-01 || 1
|-
| 0353-01-02 || 1
|-
| 0353-02-01 || 2
|-
| 0353-10-02 || 1
|-
| 0353-11-02 || 1
|-
| 0353-12-01 || 1
|-
| 0353-13-02 || 1
|-
| 0353-17-02 || 1
|-
| 0353-17-03 || 1
|-
| 0353-18-01 || 1
|-
| 0353-18-02 || 1
|-
| 0353-18-05 || 1
|-
| 0353-18-06 || 1
|-
| 0353-19-02 || 1
|-
| 0353-20-01 || 4
|-
| 0353-30-01 || 2
|-
| 0353-70-01 || 1
|-
| 0353-90-01 || 4
|-
| 0353-96-01 || 2
|-
| 0353-97-01 || 4
|-
| 0353-98-01 || 11
|-
| 0353-98-02 || 4
|-
| 0353-99-02 || 2
|-
| 0353-99-03 || 2
|-
| 0353-99-04 || 4
|-
|}
|-
|}

=== NC353L with 10369A and 1.8" HDD ===
{| border="0" cellpadding="2"
|-
| [[Image:10353-10369-hdd-assy.jpeg|thumb|NC353L with 10369A and 1.8"HDD Camera Assembly]] ||
{| border="1" cellpadding="1"
|-
| part# || quantity
|-
| 0353-00-01 || 1
|-
| 0353-00-02 || 1
|-
| 0353-00-03 || 1
|-
| 0353-00-04 || 1
|-
| 0353-00-06 || 1
|-
| 0353-00-07 || 1
|-
| 0353-01-01 || 1
|-
| 0353-01-02 || 1
|-
| 0353-01-03 || 1
|-
| 0353-02-02 || 1
|-
| 0353-10-02 || 1
|-
| 0353-11-03 || 1
|-
| 0353-12-01 || 1
|-
| 0353-13-02 || 1
|-
| 0353-17-02 || 1
|-
| 0353-17-03 || 1
|-
| 0353-18-01 || 1
|-
| 0353-18-02 || 1
|-
| 0353-18-03 || 1
|-
| 0353-18-04 || 1
|-
| 0353-18-05 || 1
|-
| 0353-18-06 || 1
|-
| 0353-20-01 || 4
|-
| 0353-30-01 || 2
|-
| 0353-30-02 || 1
|-
| 0353-70-01 || 1
|-
| 0353-90-01 || 4
|-
| 0353-96-01 || 2
|-
| 0353-97-01 || 4
|-
| 0353-98-01 || 11
|-
| 0353-98-02 || 4
|-
| 0353-98-03 || 4
|-
| 0353-99-02 || 4
|-
| 0353-99-04 || 4
|-
|}
|-
|}

== 0353-00 - PCB assemblies ==
=== 0353-00-01 - 10353 rev E assembly ===
{| border="0" cellpadding="2"
|-
| [[Image:0353-00-01.jpeg|thumb|[[Media:0353-00-01.stp.tar.gz|3d (step)]]  [[Media:0353-00-01.dxf.tar.gz|2d (dxf)]]  [[Media:0353-00-01.pdf|2d (pdf)]]]] || ''Notes:Some individual components are not shown in the model.''
|-
|}

=== 0353-00-02 - 10369 rev A assembly ===
{| border="0" cellpadding="2"
|-
| [[Image:0353-00-02.jpeg|thumb|[[Media:0353-00-02.stp.tar.gz|3d (step)]]  [[Media:0353-00-02.dxf.tar.gz|2d (dxf)]]  [[Media:0353-00-02.pdf|2d (pdf)]]]] || ''Notes:Some individual components are not shown in the model.''
|-
|}
=== 0353-00-03 - 103693 rev A assembly ===
{| border="0" cellpadding="2"
|-
| [[Image:0353-00-03.jpeg|thumb|[[Media:0353-00-03.stp.tar.gz|3d (step)]]  [[Media:0353-00-03.dxf.tar.gz|2d (dxf)]]  [[Media:0353-00-03.pdf|2d (pdf)]]]] || ''Notes:Some individual components are not shown in the model.''
|-
|}
=== 0353-00-04 - 103691 rev A assembly ===
{| border="0" cellpadding="2"
|-
| [[Image:0353-00-04.jpeg|thumb|[[Media:0353-00-04.stp.tar.gz|3d (step)]]  [[Media:0353-00-04.dxf.tar.gz|2d (dxf)]]  [[Media:0353-00-04.pdf|2d (pdf)]]]] ||
|-
|}

=== 0353-00-06 - 10338 rev A assembly ===
{| border="0" cellpadding="2"
|-
| [[Image:0353-00-06.jpeg|thumb|[[Media:0353-00-06.stp.tar.gz|3d (step)]]  [[Media:0353-00-06.dxf.tar.gz|2d (dxf)]]  [[Media:0353-00-06.pdf|2d (pdf)]]]] || ''Notes:Some individual components are not shown in the model.''
|-
|}

=== 0353-00-07 - 103692 assembly ===
{| border="0" cellpadding="2"
|-
| [[Image:0353-00-07.jpeg|thumb|[[Media:0353-00-07.stp.tar.gz|3d (step)]]  [[Media:0353-00-07.dxf.tar.gz|2d (dxf)]]  [[Media:0353-00-07.pdf|2d (pdf)]]]] ||
|-
|}

== 0353-01 - cable assemblies ==
=== 0353-01-01 - flex jumper, 30 conductors, 0.5mm pitch, l=30mm, t=0.3mm both ends ===

=== 0353-01-02 - flex jumper, 10 conductors, 0.5mm pitch, l=76mm, t=0.3mm both ends ===

=== 0353-01-03 - flex jumper, 40 conductors, 0.5mm pitch, l=76mm (one end t=0.3mm, other end t=0.2mm) ===

=== 0353-01-04 - RJ45/DB9F Modular Adapter, wired ===

[http://www.cablestogo.com/product.asp?cat_id=107&sku=02941 RJ45/DB9F Modular Adapter]

The wiring is described on [[RJ45/DB9F_Modular_Adapter]]

=== 0353-01-05 - 6P6C crossed modular cable ===

== 0353-02 - other electronic assemblies ==
=== 0353-02-01 - CF card ===

2GB Compact Flash - SanDisk SDCFX3-2048

=== 0353-02-02 - 1.8" HDD ===

=== 0353-02-03 - 2.5" HDD ===

== Major camera enclosure parts ==
=== 0353-10 - bottoms ===
==== 0353-10-01 - camera bottom, l=104.77mm ====
{| border="0" cellpadding="2"
|-
| [[Image:0353-10-01.jpeg|thumb|[[Media:0353-10-01.stp.tar.gz|3d (step)]]  [[Media:0353-10-01.dxf.tar.gz|2d (dxf)]]  [[Media:0353-10-01.pdf|2d (pdf)]]]] ||
|-
|}

==== 0353-10-02 - camera bottom, l=104.77mm ====
(tripod mount moved forward)
{| border="0" cellpadding="2"
|-
| [[Image:0353-10-02.jpeg|thumb|[[Media:0353-10-02.stp.tar.gz|3d (step)]]  [[Media:0353-10-02.dxf.tar.gz|2d (dxf)]]  [[Media:0353-10-02.pdf|2d (pdf)]]]] ||
|-
|}

=== 0353-11 - tops ===
==== 0353-11-01 - camera top plain (no connector holes), l=104.77mm ====
{| border="0" cellpadding="2"
|-
| [[Image:0353-11-01.jpeg|thumb|[[Media:0353-11-01.stp.tar.gz|3d (step)]]  [[Media:0353-11-01.dxf.tar.gz|2d (dxf)]]  [[Media:0353-11-01.pdf|2d (pdf)]]]] ||
|-
|}
==== 0353-11-02 - camera top with connector holes for the 10369 (serial port, optoisolated I/O), l=104.77mm ====
{| border="0" cellpadding="2"
|-
| [[Image:0353-11-02.jpeg|thumb|[[Media:0353-11-02.stp.tar.gz|3d (step)]]  [[Media:0353-11-02.dxf.tar.gz|2d (dxf)]]  [[Media:0353-11-02.pdf|2d (pdf)]]]] ||
|-
|}

==== 0353-11-03 - camera top with connector holes for the 10369 (serial port, optoisolated I/O), and 1.8" HDD, l=104.77mm ====
{| border="0" cellpadding="2"
|-
| [[Image:0353-11-03.jpeg|thumb|[[Media:0353-11-03.stp.tar.gz|3d (step)]]  [[Media:0353-11-03.dxf.tar.gz|2d (dxf)]]  [[Media:0353-11-03.pdf|2d (pdf)]]]] ||
|-
|}

=== 0353-12 - front ends ===
==== 0353-12-01 - Sensor front end for 10318/10338 boards ====
{| border="0" cellpadding="2"
|-
| [[Image:0353-12-01.jpeg|thumb|[[Media:0353-12-01.stp.tar.gz|3d (step)]]  [[Media:0353-12-01.dxf.tar.gz|2d (dxf)]]  [[Media:0353-12-01.pdf|2d (pdf)]]]] ||
|-
|}
=== 0353-13 - back panels ===
==== 0353-13-01 - Back panel, only network (RJ45) connector ====
==== 0353-13-02 - Back panel, with holes for network, SATA and USB connectors ====
{| border="0" cellpadding="2"
|-
| [[Image:0353-13-02.jpeg|thumb|[[Media:0353-13-02.stp.tar.gz|3d (step)]]  [[Media:0353-13-02.dxf.tar.gz|2d (dxf)]]  [[Media:0353-13-02.pdf|2d (pdf)]]]] ||
|-
|}
== 0353-17 - decals/overlays ==
=== 0353-17-01 - back panel overlay, network only ===
{| border="0" cellpadding="2"
|-
| [[Image:0353-17-01.jpeg|thumb|[[Media:0353-17-01.stp.tar.gz|3d (step)]]  [[Media:0353-17-01.dxf.tar.gz|2d (dxf)]]  [[Media:0353-17-01.pdf|2d (pdf)]]]] ||
|-
|}
=== 0353-17-02 - back panel overlay for 10369A (RJ45, SATA, USB) ===
{| border="0" cellpadding="2"
|-
| [[Image:0353-17-02.jpeg|thumb|[[Media:0353-17-02.stp.tar.gz|3d (step)]]  [[Media:0353-17-02.dxf.tar.gz|2d (dxf)]]  [[Media:0353-17-02.pdf|2d (pdf)]]]] ||
|-
|}
=== 0353-17-03 - bottom overlay ===
{| border="0" cellpadding="2"
|-
| [[Image:0353-17-03.jpeg|thumb|[[Media:0353-17-03.stp.tar.gz|3d (step)]]  [[Media:0353-17-03.dxf.tar.gz|2d (dxf)]]  [[Media:0353-17-03.pdf|2d (pdf)]]]] ||
|-
|}
== 0353-18 - parts external other ==
=== 0353-18-01 - tripod mount, 1/4-20 thread ===
{| border="0" cellpadding="2"
|-
| [[Image:0353-18-01.jpeg|thumb|[[Media:0353-18-01.stp.tar.gz|3d (step)]]  [[Media:0353-18-01.dxf.tar.gz|2d (dxf)]]  [[Media:0353-18-01.pdf|2d (pdf)]]]] ||
|-
|}
=== 0353-18-02 - connector cover ===
{| border="0" cellpadding="2"
|-
| [[Image:0353-18-02.jpeg|thumb|[[Media:0353-18-02.stp.tar.gz|3d (step)]]  [[Media:0353-18-02.dxf.tar.gz|2d (dxf)]]  [[Media:0353-18-02.pdf|2d (pdf)]]]] ||
|-
|}

=== 0353-18-03 - Enclosure for the 1.8" HDD, bottom ===
{| border="0" cellpadding="2"
|-
| [[Image:0353-18-03.jpeg|thumb|[[Media:0353-18-03.stp.tar.gz|3d (step)]]  [[Media:0353-18-03.dxf.tar.gz|2d (dxf)]]  [[Media:0353-18-03.pdf|2d (pdf)]]]] ||
|-
|}

=== 0353-18-04 - Enclosure for the 1.8" HDD, top ===
{| border="0" cellpadding="2"
|-
| [[Image:0353-18-04.jpeg|thumb|[[Media:0353-18-04.stp.tar.gz|3d (step)]]  [[Media:0353-18-04.dxf.tar.gz|2d (dxf)]]  [[Media:0353-18-04.pdf|2d (pdf)]]]] ||
|-
|}

=== 0353-18-05 - 5mm C mount adapter ring ===

=== 0353-18-06 - C mount cap ===

== 0353-19 - parts internal other ==
=== 0353-19-01 - CF support ===
{| border="0" cellpadding="2"
|-
| [[Image:0353-19-01.jpeg|thumb|[[Media:0353-19-01.stp.tar.gz|3d (step)]]  [[Media:0353-19-01.dxf.tar.gz|2d (dxf)]]  [[Media:0353-19-01.pdf|2d (pdf)]]]] ||
|-
|}

=== 0353-19-02 - CF support ===
{| border="0" cellpadding="2"
|-
| [[Image:0353-19-02.jpeg|thumb|[[Media:0353-19-02.stp.tar.gz|3d (step)]]  [[Media:0353-19-02.dxf.tar.gz|2d (dxf)]]  [[Media:0353-19-02.pdf|2d (pdf)]]]] ||
|-
|}

=== 0353-19-03 - OS5000 support ===
{| border="0" cellpadding="2"
|-
| [[Image:0353-19-03.jpeg|thumb|[[Media:0353-19-03.stp.tar.gz|3d (step)]]  [[Media:0353-19-03.dxf.tar.gz|2d (dxf)]]  [[Media:0353-19-03.pdf|2d (pdf)]]]] ||
|-
|}

== 0353-20 - custom mounting parts ==
=== 0353-20-01 - standoff, M2/M2.5, 14.5mm high, DIA 4.5mm ===
{| border="0" cellpadding="2"
|-
| [[Image:0353-20-01.jpeg|thumb|[[Media:0353-20-01.stp.tar.gz|3d (step)]]  [[Media:0353-20-01.dxf.tar.gz|2d (dxf)]]  [[Media:0353-20-01.pdf|2d (pdf)]]]] ||
|-
|}
== 0353-30 - insulator tubing, spacers, tapes ==
=== 0353-30-01 - insulator tubing, l=12.5mm , ID=4.5MM (heat shrink OK) ===
{| border="0" cellpadding="2"
|-
| [[Image:0353-30-01.jpeg|thumb|[[Media:0353-30-01.stp.tar.gz|3d (step)]]  [[Media:0353-30-01.dxf.tar.gz|2d (dxf)]]  [[Media:0353-30-01.pdf|2d (pdf)]]]] ||
|-
|}

=== 0353-30-02 - Flex cable holder for the HDD ===
{| border="0" cellpadding="2"
|-
| [[Image:0353-30-02.jpeg|thumb|[[Media:0353-30-02.stp.tar.gz|3d (step)]]  [[Media:0353-30-02.dxf.tar.gz|2d (dxf)]]  [[Media:0353-30-02.pdf|2d (pdf)]]]] ||
|-
|}

== 0353-60 - custom extruded profiles ==
=== 0353-60-01 - aluminum extrusion for camera bottoms ===
=== 0353-60-02 - aluminum extrusion for camera tops ===
== 0353-70 - optical components ==
=== 0353-70-01 - IR cutoff filter, DIA 20.0mm, t=0.3mm ===
== 0353-80 - other standard parts ==
== 0353-85 - threaded spacers for other than M2 and M2.5 ==
== 0353-86 - threaded spacers for M2.5 ==
== 0353-87 - threaded spacers for M2 ==
== 0353-88 - unthreaded spacers for other than M2 and M2.5 ==
== 0353-89 - unthreaded spacers for M2.5 ==
== 0353-90 - unthreaded spacers for M2 ==
=== 0353-90-01 - spacer, l=4mm (~McMaster p/n 92510A005 - approximate to metric) ===
== 0353-91 - nuts for other than M2 and M2.5 ==
== 0353-92 - nuts for M2.5 ==
== 0353-93 - nuts for M2 ==
== 0353-94 - washers for other than M2 and M2.5 ==
== 0353-95 - washers for M2.5 ==
== 0353-96 - washers for M2 ==
=== 0353-96-01 - washer, stainless steel, ===
McMaster p/n 90965A110

== 0353-97 - screws other than M2 and M2.5 ==
=== 0353-97-01 - screw socket cap, #4-40, 0.19"long ===
(McMaster p/n 91251A105)

== 0353-98 - screws, metric, M2.5 ==
=== 0353-98-01 - screw, M2.5, Socket cap, Black anodized, l=6mm (McMaster p/n 91239A704 ) ===
=== 0353-98-02 - screw, M2.5, Socket cap, flat, l=6mm (McMaster p/n 92125A084 ) ===

=== 0353-98-03 - screw, M2.5, Flat cap, l=12mm (McMaster-Carr p/n 93395A182) ===

== 0353-99 - screws, metric, M2 ==
=== 0353-99-01 - screw, M2, Socket cap, Black anodized, l=6mm (McMaster p/n 91239A704 ) ===
=== 0353-99-02 - screw, M2, Socket cap, Stainless steel, l=10mm (McMaster p/n ) ===
=== 0353-99-03 - screw, M2, Socket cap, Stainless steel, l=12mm (McMaster p/n 92290A019) ===

=== 0353-99-04 - screw, M2, Philips, flat l=3mm (McMaster p/n ) ===