View source for Talk:10334

Dima and Wensai,

Let's discuss (maybe even copy the text here from the article) it here and then fix the main article page so it will match the final decision (or at least current one). And yes, we can use jumper - actually not jumper but two connected pins on the connector on the programming cable. No cable inserted - USB is active, inserted - USB is disabled and programming interface is active. Anyway only single-wire interface (as I described in [[10331]]) will be normally used, to program the adapter we can later use some special USB adapter (or just from [http://www.atmel.com Atmel] or a 3-rd party? Just add connector to the lens adapter?

Andrey