10359 in dual sensor setup - Revision history

Aegdss: /* fixed php script */

2008-09-12T20:36:28Z

fixed php script

← Older revision		Revision as of 20:36, 12 September 2008
Line 37:		Line 37:
	//! just acquire a single frame		//! just acquire a single frame
	elphel_compressor_frame();		elphel_compressor_frame();
	echo "<img src=\"http://" . $_SERVER["SERVER_ADDR"] . ":8081/last/save/wait/img\"		echo "<img src=\"http://" . $_SERVER["SERVER_ADDR"] . ":8081/last/save/wait/img \>"
	?>		?>

Polto: /* Considerations */

2008-09-05T04:33:52Z

Considerations

← Older revision		Revision as of 04:33, 5 September 2008
Line 11:		Line 11:
	=Considerations=		=Considerations=

	The monochrome sensor is connected with a 12" flat cable. This sensor will need phase ~~individual~~ adjustment.		The monochrome sensor is connected with a 12" flat cable. This sensor will need individual phase adjustment.

	=Tests=		=Tests=

Polto: /* Hardware configuration */

2008-09-04T08:07:52Z

Hardware configuration

← Older revision		Revision as of 08:07, 4 September 2008
Line 2:		Line 2:

	=Hardware configuration=		=Hardware configuration=
			[[Image:10359_polto.jpeg\|thumb]]
	In my tests I use 2 sensors connected to a 10359 board and a 10353.		In my tests I use 2 sensors connected to a 10359 board and a 10353.

	To be able to simply visualize the difference I connected 1 color and one monochrome sensor.		To be able to simply visualize the difference I connected 1 color and one monochrome sensor.

	For simplicity and better hardware protection I just hacked 2 standard camera cases. It's not perfect at all, but allow a clean setup without many work.		For simplicity and better hardware protection I just hacked 2 standard camera cases. It's not perfect at all, but allow a clean setup without many work.

	=Considerations=		=Considerations=

Polto: /* Tests */

2008-09-04T07:58:36Z

Tests

@@ Line 14: / Line 14: @@
 =Tests=
 ==Transparent mode==
 ==Snapshot mode==
 =Conclusions=

Polto at 07:01, 4 September 2008

2008-09-04T07:01:11Z

New page

{{Polto's test page}}

=Hardware configuration=
In my tests I use 2 sensors connected to a 10359 board and a 10353.

To be able to simply visualize the difference I connected 1 color and one monochrome sensor.

For simplicity and better hardware protection I just hacked 2 standard camera cases. It's not perfect at all, but allow a clean setup without many work.

=Considerations=

The monochrome sensor is connected with a 12" flat cable. This sensor will need phase individual adjustment.

=Tests=
==Transparent mode==
==Snapshot mode==

=Conclusions=