103692 - Revision history

Oleg at 21:40, 11 January 2010

2010-01-11T21:40:44Z

Oleg at 17:33, 5 January 2010

2010-01-05T17:33:22Z

Andrey.filippov at 04:45, 30 June 2008

2008-06-30T04:45:43Z

Andrey.filippov at 04:15, 30 June 2008

2008-06-30T04:15:32Z

Andrey.filippov at 04:14, 30 June 2008

2008-06-30T04:14:20Z

Andrey.filippov at 01:41, 30 June 2008

2008-06-30T01:41:43Z

New page

[[Image:103692_md.jpeg|frame|[[Media:103692.pdf|103692 Circuit Diagram, Parts List, PCB layout]]     [[Media:103692_gerber.tar.gz|103692 Gerber files]]]]

← Older revision		Revision as of 21:40, 11 January 2010
Line 4:		Line 4:

	[[Image:Connect internal disk.jpeg\|thumb\|500px\|1.8" HDD proper cable connection]]		[[Image:Connect internal disk.jpeg\|thumb\|500px\|1.8" HDD proper cable connection]]
		+
		+	=== Notes ===
		+	<font color=red>
		+	* It can be impossible to mount an external SATA disk to the camera with an internal 18"HDD (NC353L-369A-HDD) as the internal disk (Toshiba MK1214GAH) does not react on master/slave-option bus and also it doesn't tristate the signals it shares with the SATA bridge.
		+	</font>

	=== Connectors ===		=== Connectors ===

@@ Line 2: / Line 2: @@
 [[Image:103692_md.jpeg|frame|[[Media:103692.pdf|103692 Circuit Diagram, Parts List, PCB layout]]&nbsp;&nbsp;&nbsp;&nbsp; [[Media:103692_gerber.tar.gz|103692 Gerber files]]]]
 is an adapter board used with the [[10369]] board to connect ZIF-type 1.8" hard drive to the [[353 | Elphel Model 353 camera]].
 === Connectors ===

← Older revision		Revision as of 04:45, 30 June 2008
Line 116:		Line 116:
	\|-		\|-
	\|}		\|}
		+	'' '''Note:''' This connector uses 0.3mm flex cable, the HDD needs 0.2mm cable end. ''

@@ Line 68: / Line 68: @@
 ----
-==== J2 - IDE (from the CPU board) ====
+==== J2 - IDE (to the HDD) ====
 {|  class="wikitable" style="background:#fcfcfc; "  border="1"
-|+ IDE connector (from 10353)
+|+ IDE connector (to the ZIF-type 1.8" HDD)
 |-
 ! Pin !! Signal !! Notes !! !! Pin !! Signal !! Notes

← Older revision		Revision as of 04:14, 30 June 2008
Line 1:		Line 1:
		+	== 103692 - Adapter board for ZIF-type 1.8" HDD ==
	[[Image:103692_md.jpeg\|frame\|[[Media:103692.pdf\|103692 Circuit Diagram, Parts List, PCB layout]]     [[Media:103692_gerber.tar.gz\|103692 Gerber files]]]]		[[Image:103692_md.jpeg\|frame\|[[Media:103692.pdf\|103692 Circuit Diagram, Parts List, PCB layout]]     [[Media:103692_gerber.tar.gz\|103692 Gerber files]]]]
		+	103692 is an adapter board used with the [[10369]] board to connect ZIF-type 1.8" hard drive to the [[353 \| Elphel Model 353 camera]].
		+
		+	=== Connectors ===
		+
		+	----
		+
		+	==== J1 - to 10369 board ====
		+	{\| class="wikitable" style="background:#fcfcfc; " border="1"
		+	\|+ connector to the 10369 board
		+	\|-
		+	! Pin !! Signal !! Notes !! !! Pin !! Signal !! Notes
		+	\|-
		+	\| 1 \|\| CF1PRESENT \|\| GND if CF1 installed \|\| \|\| 26 \|\| GND \|\|
		+	\|-
		+	\| 2 \|\| B0D[11] \|\| \|\| \|\| 27 \|\| B0D[3] \|\|
		+	\|-
		+	\| 3 \|\| B0D[12] \|\| \|\| \|\| 28 \|\| B0D[4] \|\|
		+	\|-
		+	\| 4 \|\| B0D[13] \|\| \|\| \|\| 29 \|\| B0D[5] \|\|
		+	\|-
		+	\| 5 \|\| B0D[14] \|\| \|\| \|\| 30 \|\| B0D[6] \|\|
		+	\|-
		+	\| 6 \|\| B0D[15] \|\| \|\| \|\| 31 \|\| B0D[7] \|\|
		+	\|-
		+	\| 7 \|\| B0CS1 \|\| \|\| \|\| 32 \|\| B0CS0 \|\|
		+	\|-
		+	\| 8 \|\| -- \|\| \|\| \|\| 33 \|\| -- \|\|
		+	\|-
		+	\| 9 \|\| B0IORD \|\| \|\| \|\| 34 \|\| GND \|\|
		+	\|-
		+	\| 10 \|\| B0IOWR \|\| \|\| \|\| 35 \|\| -- \|\|
		+	\|-
		+	\| 11 \|\| -- \|\| \|\| \|\| 36 \|\| -- \|\|
		+	\|-
		+	\| 12 \|\| B0INTRQ \|\| \|\| \|\| 37 \|\| -- \|\|
		+	\|-
		+	\| 13 \|\| +3.3V \|\| \|\| \|\| 38 \|\| +3.3V \|\|
		+	\|-
		+	\| 14 \|\| GND \|\| \|\| \|\| 39 \|\| SCL \|\|
		+	\|-
		+	\| 15 \|\| B0RSTS \|\| Reset master \|\| \|\| 40 \|\| SDA \|\|
		+	\|-
		+	\| 16 \|\| B0RSTM \|\| Reset slave \|\| \|\| 41 \|\| -- \|\|
		+	\|-
		+	\| 17 \|\| B0IORDY \|\| \|\| \|\| 42 \|\| GND \|\|
		+	\|-
		+	\| 18 \|\| B0DMARQ \|\| \|\| \|\| 43 \|\| B0A[2] \|\|
		+	\|-
		+	\| 19 \|\| B0DMACK \|\| \|\| \|\| 44 \|\| B0A[1] \|\|
		+	\|-
		+	\| 20 \|\| B0DASP \|\| \|\| \|\| 45 \|\| B0A[0] \|\|
		+	\|-
		+	\| 21 \|\| B0PDIAG \|\| \|\| \|\| 46 \|\| B0D[0] \|\|
		+	\|-
		+	\| 22 \|\| B0D[8] \|\| \|\| \|\| 47 \|\| B0D[1] \|\|
		+	\|-
		+	\| 23 \|\| B0D[9] \|\| \|\| \|\| 48 \|\| B0D[2] \|\|
		+	\|-
		+	\| 24 \|\| B0D[10] \|\| \|\| \|\| 49 \|\| B0IOCS16 \|\|
		+	\|-
		+	\| 25 \|\| GND \|\| \|\| \|\| 50 \|\| CF0PRESENT \|\| GND if CF0 installed
		+	\|-
		+	\|}
		+
		+
		+	----
		+
		+	==== J2 - IDE (from the CPU board) ====
		+
		+	{\| class="wikitable" style="background:#fcfcfc; " border="1"
		+	\|+ IDE connector (from 10353)
		+	\|-
		+	! Pin !! Signal !! Notes !! !! Pin !! Signal !! Notes
		+	\|-
		+	\| 1 \|\| -- \|\| \|\| \|\| 2 \|\| -- \|\|
		+	\|-
		+	\| 3 \|\| B0RSTM \|\| \|\| \|\| 4 \|\| GND \|\|
		+	\|-
		+	\| 5 \|\| B0D[7] \|\| \|\| \|\| 6 \|\| B0D[8] \|\|
		+	\|-
		+	\| 7 \|\| B0D[6] \|\| \|\| \|\| 8 \|\| B0D[9] \|\|
		+	\|-
		+	\| 9 \|\| B0D[5] \|\| \|\| \|\| 10 \|\| B0D[10] \|\|
		+	\|-
		+	\| 11 \|\| B0D[4] \|\| \|\| \|\| 12 \|\| B0D[11] \|\|
		+	\|-
		+	\| 13 \|\| B0D[3] \|\| \|\| \|\| 14 \|\| B0D[12] \|\|
		+	\|-
		+	\| 15 \|\| B0D[2] \|\| \|\| \|\| 16 \|\| B0D[13] \|\|
		+	\|-
		+	\| 17 \|\| B0D[1] \|\| \|\| \|\| 18 \|\| B0D[14] \|\|
		+	\|-
		+	\| 19 \|\| B0D[0] \|\| \|\| \|\| 20 \|\| B0D[15] \|\|
		+	\|-
		+	\| 21 \|\| GND \|\| \|\| \|\| 22 \|\| B0DMARQ \|\|
		+	\|-
		+	\| 23 \|\| GND \|\| \|\| \|\| 24 \|\| B0IOWR \|\|
		+	\|-
		+	\| 25 \|\| B0IORD \|\| \|\| \|\| 26 \|\| GND \|\|
		+	\|-
		+	\| 27 \|\| B0IORDY \|\| \|\| \|\| 28 \|\| GND \|\|
		+	\|-
		+	\| 29 \|\| B0DMACK \|\| \|\| \|\| 30 \|\| B0INTRQ \|\|
		+	\|-
		+	\| 31 \|\| B0A[1] \|\| \|\| \|\| 32 \|\| B0PDIAG \|\|
		+	\|-
		+	\| 33 \|\| B0A[0] \|\| \|\| \|\| 34 \|\| B0A[2] \|\|
		+	\|-
		+	\| 35 \|\| B0CS0 \|\| \|\| \|\| 36 \|\| B0CS1 \|\|
		+	\|-
		+	\| 37 \|\| B0DASP \|\| \|\| \|\| 38 \|\| +3.3V \|\|
		+	\|-
		+	\| 39 \|\| +3.3V \|\| \|\| \|\| 40 \|\| -- \|\|
		+	\|-
		+	\|}