Fix network configuration - Revision history

Oleg: /* Quick instructions */

2018-10-26T22:51:23Z

Quick instructions

← Older revision		Revision as of 22:51, 26 October 2018
Line 45:		Line 45:

	<font size=2>#boot from NAND flash?		<font size=2>#boot from NAND flash?
	~~root@elphel393:~# overlay_sync 1~~
	root@elphel393:~# shutdown -hP now		root@elphel393:~# shutdown -hP now
	#powercycle</font>		#powercycle</font>

2018-10-26T22:49:30Z

Quick instructions

2018-10-26T22:48:56Z

← Older revision		Revision as of 22:48, 26 October 2018
Line 16:		Line 16:
	./host_script.sh 192.168.0.9</font>		./host_script.sh 192.168.0.9</font>
	Example output:		Example output:
	<font size='2'>Copy data to the target...		<font size='1'>Copy data to the target...
	rootfs.tar.gz		rootfs.tar.gz
	100% 925 0.9KB/s 00:00		100% 925 0.9KB/s 00:00
Line 38:		Line 38:
	root@elphel393:~# shutdown -hP now		root@elphel393:~# shutdown -hP now
	then powercycle		then powercycle

	Success</font>		Success</font>

			* To sync the changes to the file system:
			<font size=2>ssh root@192.168.0.9
			''pass''</font>

			<font size=2>#boot from NAND flash?
	* If the boot ~~device is internal~~ NAND flash~~, run '''~~shutdown -hP now~~''' to commit changes before power-cycling the camera. Not required if booted~~ from ~~uSD~~ card.		root@elphel393:~# overlay_sync 1
			root@elphel393:~# shutdown -hP now
			#powercycle</font>
			or
			<font size=2>#boot from card?
			root@elphel393:~# sync
			root@elphel393:~# reboot -f</font>

	Next, any extra changes related to setting ip address, netmask or gateway made to '''''/etc/elphel393/init_elphel393.py''''' can be commented out or the original file can be used.		Next, any extra changes related to setting ip address, netmask or gateway made to '''''/etc/elphel393/init_elphel393.py''''' can be commented out or the original file can be used.
Line 60:		Line 68:
	└──'''etc/network/interfaces''' - network setup for eth0		└──'''etc/network/interfaces''' - network setup for eth0
	</font>		</font>



	[[Category:393]]		[[Category:393]]

2018-10-26T22:43:18Z

Quick instructions

← Older revision		Revision as of 22:43, 26 October 2018
Line 16:		Line 16:
	./host_script.sh 192.168.0.9</font>		./host_script.sh 192.168.0.9</font>
	Example output:		Example output:
	<font size='1'>Copy data to the target...		<font size='2'>Copy data to the target...
	rootfs.tar.gz		rootfs.tar.gz
	100% 925 0.9KB/s 00:00		100% 925 0.9KB/s 00:00

2018-10-26T22:43:06Z

Quick instructions

@@ Line 15: / Line 15: @@
   cd fix_net_config
   ./host_script.sh 192.168.0.9</font>
 * If the boot device is internal NAND flash, run '''shutdown -hP now''' to commit changes before power-cycling the camera. Not required if booted from uSD card.
 Next, any extra changes related to setting ip address, netmask or gateway made to '''''/etc/elphel393/init_elphel393.py''''' can be commented out or the original file can be used.

2018-10-26T22:32:34Z

Quick instructions

← Older revision		Revision as of 22:32, 26 October 2018
Line 15:		Line 15:
	cd fix_net_config		cd fix_net_config
	./host_script.sh 192.168.0.9</font>		./host_script.sh 192.168.0.9</font>
			* If the boot device is internal NAND flash, run '''shutdown -hP now''' to commit changes before power-cycling the camera. Not required if booted from uSD card.
	Next, any extra changes related to setting ip address, netmask or gateway made to '''''/etc/elphel393/init_elphel393.py''''' can be commented out or the original file can be used.		Next, any extra changes related to setting ip address, netmask or gateway made to '''''/etc/elphel393/init_elphel393.py''''' can be commented out or the original file can be used.

2018-10-26T22:25:58Z

Quick instructions

← Older revision		Revision as of 22:25, 26 October 2018
Line 9:		Line 9:
	==How to update network setup for '''20180511''' (or older firmware)==		==How to update network setup for '''20180511''' (or older firmware)==
	===Quick instructions===		===Quick instructions===
	* Camera is online. The ip address can be any, e.g., 192.168.0.9		* Camera is online. The IP address can be any, e.g., 192.168.0.9
	* PC: in a terminal window (~~linux os~~) type the following commands:		* PC: in a terminal window (GNU/Linux OS) type the following commands:
	<font size='2'>wget https://community.elphel.com/files/393/fix_network_config/fix_net_config.tar.gz		<font size='2'>wget https://community.elphel.com/files/393/fix_network_config/fix_net_config.tar.gz
	tar -xzpf fix_net_config.tar.gz		tar -xzpf fix_net_config.tar.gz

2018-10-26T22:25:12Z

Description

← Older revision		Revision as of 22:25, 26 October 2018
Line 21:		Line 21:
	From a Linux PC, download [https://community.elphel.com/files/393/fix_network_config/fix_net_config.tar.gz fix_net_config.tar.gz].		From a Linux PC, download [https://community.elphel.com/files/393/fix_network_config/fix_net_config.tar.gz fix_net_config.tar.gz].
	The archive contains 2 scripts - one (shell) is run from the host PC, another (python) will be copied and automatically run on the camera.		The archive contains 2 scripts - one (shell) is run from the host PC, another (python) will be copied and automatically run on the camera.
	The python script will write the current configuration to '''''/etc/network/interfaces''''' and overwrite one of the init scripts to disable network		The python script will write the current configuration (IP, mask, default gateway for eth0) to '''''/etc/network/interfaces''''' and overwrite one of the init scripts to disable network
	configuration in '''''/etc/elphel393/init_elphel393.py''''' on startup.		configuration in '''''/etc/elphel393/init_elphel393.py''''' on startup.
	<font size='2'>'''fix_net_config.tar.gz'''		<font size='2'>'''fix_net_config.tar.gz'''

2018-10-26T21:51:47Z

How to update network setup for 20180511 (or older firmware)

← Older revision		Revision as of 21:51, 26 October 2018
Line 16:		Line 16:
	./host_script.sh 192.168.0.9</font>		./host_script.sh 192.168.0.9</font>

	Next, any extra changes related to setting ip address, netmask or gateway made to '''''/etc/elphel393/init_elphel393.py''''' can be ~~removed. Or use~~ the original file.		Next, any extra changes related to setting ip address, netmask or gateway made to '''''/etc/elphel393/init_elphel393.py''''' can be commented out or the original file can be used.

	===Description===		===Description===

2018-10-26T21:51:12Z

Quick instructions

← Older revision		Revision as of 21:51, 26 October 2018
Line 16:		Line 16:
	./host_script.sh 192.168.0.9</font>		./host_script.sh 192.168.0.9</font>

	Next, any changes related to setting ip address, netmask or gateway made to '''''/etc/elphel393/init_elphel393.py''''' can be removed.		Next, any extra changes related to setting ip address, netmask or gateway made to '''''/etc/elphel393/init_elphel393.py''''' can be removed. Or use the original file.

	===Description===		===Description===