Difference between revisions of "Eeebox"
From ElphelWiki
| Line 12: | Line 12: | ||
===IP forwarding (in case the camera wants to see the big world)=== | ===IP forwarding (in case the camera wants to see the big world)=== | ||
| − | 1. | + | 1. To |
sudo kate /etc/sysctl.conf | sudo kate /etc/sysctl.conf | ||
| − | + | Add | |
net.ipv4.ip_forward=1 | net.ipv4.ip_forward=1 | ||
net.ipv4.conf.default.forwarding=1 | net.ipv4.conf.default.forwarding=1 | ||
net.ipv4.conf.all.forwarding=1 | net.ipv4.conf.all.forwarding=1 | ||
| − | 2. | + | 2. To |
sudo kate /etc/rc.local | sudo kate /etc/rc.local | ||
| − | + | Add | |
iptables -P FORWARD REJECT | iptables -P FORWARD REJECT | ||
iptables -A FORWARD -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT | iptables -A FORWARD -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT | ||
Revision as of 12:30, 4 August 2011
Contents
Live-USB
Boot and install the system
Installation from the CVS
Get elphel353_80_install_from_cvs.sh open archive that contains the shell script and execute it. It is recommended that you create subdirectory in your home directory, i.e. "elphel_projects", move and execute elphel353_80_install_from_cvs.sh script there. Directory "distfiles" will be created there and used as a cache for software archives that will be downloaded during installation.
mkdir -p ~/elphel_projects; cd ~/elphel_projects wget "http://downloads.sourceforge.net/elphel/elphel353_80_install_from_cvs.sh.tar.gz" tar zxvf elphel353_80_install_from_cvs.sh.tar.gz ./elphel353_80_install_from_cvs.sh
IP forwarding (in case the camera wants to see the big world)
1. To
sudo kate /etc/sysctl.conf
Add
net.ipv4.ip_forward=1 net.ipv4.conf.default.forwarding=1 net.ipv4.conf.all.forwarding=1
2. To
sudo kate /etc/rc.local
Add
iptables -P FORWARD REJECT iptables -A FORWARD -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i eth0 -j ACCEPT iptables -t nat -A POSTROUTING -j MASQUERADE
