Difference between revisions of "Quote 1A"

From ElphelWiki
Jump to: navigation, search
 
(4 intermediate revisions by the same user not shown)
Line 15: Line 15:
 
| [[Elphel_camera_parts_0353-11#0353-11-131A_-_GPS_cap.2C_bottom_ring.2C_Revision_.22A.22|0353-11-131A - Cap, bottom ring, Revision "A" ]]  || 1 || 3 ||
 
| [[Elphel_camera_parts_0353-11#0353-11-131A_-_GPS_cap.2C_bottom_ring.2C_Revision_.22A.22|0353-11-131A - Cap, bottom ring, Revision "A" ]]  || 1 || 3 ||
 
|-
 
|-
−
| [[Elphel_camera_parts_0353-11#0353-11-132A_-_GPS_cap.2C_top_Revision_.22A.22|0353-11-133A - GPS cap, middle ring, Rev. "A" ]]  || 1 || 3 ||
+
| [[Elphel_camera_parts_0353-11#0353-11-132A_-_GPS_cap.2C_top_Revision_.22A.22|0353-11-132A - GPS cap, top Revision "A" ]]  || 1 || 3 ||
 
|-
 
|-
 
| [[Elphel_camera_parts_0353-11#0353-11-133A_-_GPS_cap.2C_middle_ring.2C_Rev._.22A.22|0353-11-133A - GPS cap, middle ring, Rev. "A" ]]  || 1 || 3 ||
 
| [[Elphel_camera_parts_0353-11#0353-11-133A_-_GPS_cap.2C_middle_ring.2C_Rev._.22A.22|0353-11-133A - GPS cap, middle ring, Rev. "A" ]]  || 1 || 3 ||
Line 37: Line 37:
 
| [[Elphel_camera_parts_0353-19#0353-19-17_-_Tube_Body|0353-19-17 - Multi-camera PCB Mount, Aluminum]]  || 9 || 28 ||
 
| [[Elphel_camera_parts_0353-19#0353-19-17_-_Tube_Body|0353-19-17 - Multi-camera PCB Mount, Aluminum]]  || 9 || 28 ||
 
|-
 
|-
−
| [[Elphel_camera_parts_0353-19#0353-19-64D_-_SFE_Module.2C_Base.2C_Rev_.22D.22|0353-19-64D - SFE Module, Base, Rev "D" ]]  || 10 || 33 ||  
+
| [[Elphel_camera_parts_0353-19#0353-19-64D_-_SFE_Module.2C_Base.2C_Rev_.22D.22|0353-19-64D - SFE Module, Base, Rev "D" ]]  || 10 || 33 || MAKE IN USA
 
|-
 
|-
−
| [[Elphel_camera_parts_0353-19#0353-19-641D_-_SFE_Module.2C_Base.2C_with_shifted_lens_center.2C_Rev_.22D.22|0353-19-641D - SFE Module, Base, with shifted lens center, Rev "D"  ]]  || 16 || 52 || SAMPLE
+
| [[Elphel_camera_parts_0353-19#0353-19-641D_-_SFE_Module.2C_Base.2C_with_shifted_lens_center.2C_Rev_.22D.22|0353-19-641D - SFE Module, Base, with shifted lens center, Rev "D"  ]]  || 16 || 52 || MAKE IN USA
 
|-
 
|-
−
| [[Elphel_camera_parts_0353-19#0353-19-642_-_SFE_mount_spacer|0353-19-642 - SFE mount spacer  ]]  || 4 || 12 ||
+
| [[Elphel_camera_parts_0353-19#0353-19-642_-_SFE_mount_spacer|0353-19-642 - SFE mount spacer  ]]  || 4 || 12 || MAKE IN USA
 
|-
 
|-
−
| [[Elphel_camera_parts_0353-19#0353-19-65B_-_SFE_Plate.2C_revision_.22B.22|0353-19-65B - SFE Plate, revision "B" ]]  || 26 || 85 || SAMPLE
+
| [[Elphel_camera_parts_0353-19#0353-19-65B_-_SFE_Plate.2C_revision_.22B.22|0353-19-65B - SFE Plate, revision "B" ]]  || 26 || 85 || MAKE IN USA
 
|-
 
|-
 
| [[Elphel_camera_parts_0353-19#0353-19-66C_-_Pano_head_external_body_top.2Fbottom_Rev_.22C.22|0353-19-66C - Pano head external body top/bottom Rev "C" ]]  || 2 || 6 ||  
 
| [[Elphel_camera_parts_0353-19#0353-19-66C_-_Pano_head_external_body_top.2Fbottom_Rev_.22C.22|0353-19-66C - Pano head external body top/bottom Rev "C" ]]  || 2 || 6 ||  
Line 97: Line 97:
 
| [[Elphel_camera_parts_0353-19#0353-19-85_-_Ring|0353-19-85 - Ring]]  || 1 || 3 ||
 
| [[Elphel_camera_parts_0353-19#0353-19-85_-_Ring|0353-19-85 - Ring]]  || 1 || 3 ||
 
|-
 
|-
−
| [[Elphel_camera_parts_0353-19#0353-19-86_-_Hose_Connector.2C_Network|0353-19-86 - Hose Connector, Network]]  || 1 ||
+
| [[Elphel_camera_parts_0353-19#0353-19-86_-_Hose_Connector.2C_Network|0353-19-86 - Hose Connector, Network]]  || 1 || 3 ||
 
|-
 
|-
−
| [[Elphel_camera_parts_0353-19#0353-19-87_-_Hose_Connector.2C_SATA|0353-19-87 - Hose Connector, SATA]]  || 1 ||
+
| [[Elphel_camera_parts_0353-19#0353-19-87_-_Hose_Connector.2C_SATA|0353-19-87 - Hose Connector, SATA]]  || 1 || 3 ||
 
|-
 
|-
−
| [[Elphel_camera_parts_0353-19#0353-19-88_-_Tube_Adapter|0353-19-88 - Tube Adapter]]  || 2 ||
+
| [[Elphel_camera_parts_0353-19#0353-19-88_-_Tube_Adapter|0353-19-88 - Tube Adapter]]  || 2 || 6 ||
 
|-
 
|-
−
| [[Elphel_camera_parts_0353-19#0353-19-89_-_Tube_Lock.2C_Top|0353-19-89 - Tube Lock]]  || 4 ||
+
| [[Elphel_camera_parts_0353-19#0353-19-89_-_Tube_Lock.2C_Top|0353-19-89 - Tube Lock]]  || 4 || 12 ||
 
|-
 
|-
−
| [[Elphel_camera_parts_0353-19#0353-19-90_-_IMU_Mount.2C_Bottom|0353-19-90 - IMU Mount, Bottom]]  || 1 ||
+
| [[Elphel_camera_parts_0353-19#0353-19-90_-_IMU_Mount.2C_Bottom|0353-19-90 - IMU Mount, Bottom]]  || 1 || 3 ||
 
|-
 
|-
−
| [[Elphel_camera_parts_0353-19#0353-19-91_-_IMU_Mount.2C_Top|0353-19-91 - IMU Mount, Top]]  || 1 ||
+
| [[Elphel_camera_parts_0353-19#0353-19-91_-_IMU_Mount.2C_Top|0353-19-91 - IMU Mount, Top]]  || 1 || 3 ||
 
|-
 
|-
−
| [[Elphel_camera_parts_0353-19#0353-19-92_-_Spacer.2C_IMU_Mount|0353-19-92 - Spacer, IMU Mount]]  || 4 ||
+
| [[Elphel_camera_parts_0353-19#0353-19-92_-_Spacer.2C_IMU_Mount|0353-19-92 - Spacer, IMU Mount]]  || 4 || 12 ||
 
|-
 
|-
−
| [[Elphel_camera_parts_0353-19#0353-19-93_-_Bracket.2C_Fixating|0353-19-93 - Bracket Fixating]]  || 2 ||
+
| [[Elphel_camera_parts_0353-19#0353-19-93_-_Bracket.2C_Fixating|0353-19-93 - Bracket Fixating]]  || 2 || 8 ||
 
|-
 
|-
−
| [[Elphel_camera_parts_0353-19#0353-19-94_-_Sensor_PCB_cover|0353-19-94 - Sensor PCB cover ]]  || 26 || SAMPLE ||
+
| [[Elphel_camera_parts_0353-19#0353-19-94_-_Sensor_PCB_cover|0353-19-94 - Sensor PCB cover ]]  || 26 || 85 || MAKE IN USA
 
|-
 
|-
−
| [[Elphel_camera_parts_0353-19#0353-19-95_-_Tube|0353-19-95 - Tube ]]  || 78 || SAMPLE ||
+
| [[Elphel_camera_parts_0353-19#0353-19-95_-_Tube|0353-19-95 - Tube ]]  || 78 || 250 || MAKE IN USA
 
|-
 
|-
−
| [[Elphel_camera_parts_0353-19#0353-19-97_-_Support_rod|00353-19-97 - Support rod  ]]  || 78 || SAMPLE || INVAR ||
+
| [[Elphel_camera_parts_0353-19#0353-19-97_-_Support_rod|00353-19-97 - Support rod  ]]  || 78 || 250 || MAKE IN USA
 
|-
 
|-
−
| [[Elphel_camera_parts_0353-19#0353-19-98_-_Support_rod_cap|00353-19-98 - Support rod cap  ]]  || 78 || SAMPLE ||
+
| [[Elphel_camera_parts_0353-19#0353-19-98_-_Support_rod_cap|00353-19-98 - Support rod cap  ]]  || 78 || 250 || MAKE IN USA
 
|-
 
|-
−
| [[Elphel_camera_parts_0353-19#0353-19-99-18_-_Compensation_ring.2C_l.3D1.8mm|0353-19-99-18 - Compensation ring, l=1.8mm  ]]  || 26 || SAMPLE || INVAR ||
+
| [[Elphel_camera_parts_0353-19#0353-19-99-18_-_Compensation_ring.2C_l.3D1.8mm|0353-19-99-18 - Compensation ring, l=1.8mm  ]]  || 26 || 85 || MAKE IN USA
 
|-
 
|-
−
| [[Elphel_camera_parts_0353-19#0353-19-100_-_Antenna_plate|0353-19-100 - Antenna plate   ]]  || 1 || SAMPLE ||
+
| [[Elphel_camera_parts_0353-19#0353-19-100_-_Antenna_plate|0353-19-100 - Antenna plate ]]  || 1 || 3 ||  
 
|-
 
|-
 
| [[Elphel_camera_parts_0353-60#0353-60-04_-_Aluminum_extrusion_for_the_shade_fins.2Ctop|0353-60-04 - Aluminum extrusion for the shade fins,top]]  || 10 meters ||
 
| [[Elphel_camera_parts_0353-60#0353-60-04_-_Aluminum_extrusion_for_the_shade_fins.2Ctop|0353-60-04 - Aluminum extrusion for the shade fins,top]]  || 10 meters ||
Line 132: Line 132:
 
|}
 
|}
  
−
The Quote is requested for the Quantity needed for 3-5 Units, and 10 Units.
+
The Quote is requested for the Quantity needed for 3 Units (as listed in column "Qty Total"), and 10 Units.
 
    
 
    
 
Please, read the [[Supplier_Terms_and_Conditions|Suppliers Terms and Conditions]] and send the Proposals by e-mail: [mailto://supplies@elphel.com supplies@elphel.com]
 
Please, read the [[Supplier_Terms_and_Conditions|Suppliers Terms and Conditions]] and send the Proposals by e-mail: [mailto://supplies@elphel.com supplies@elphel.com]

Latest revision as of 06:10, 12 July 2012

Elphel, Inc. invites the machine shops to Quote manufacturing of the following parts for the new Eyesis 4Pi camera:

Camera Metal Parts
Part QTY per Unit Qty Total Notes
0353-10-23 - Tube Body 1 3 MAKE in USA
0353-10-231B - Tube Body (with bottom lens openings), Rev "B" 1 3 MAKE in USA
0353-10-24A - Tube Body, IMU (rev. "A") 1 3 MAKE in USA
0353-10-25 - Mount Tube 1 3
0353-11-131A - Cap, bottom ring, Revision "A" 1 3
0353-11-132A - GPS cap, top Revision "A" 1 3
0353-11-133A - GPS cap, middle ring, Rev. "A" 1 3
0353-12-401A - Shade fins, top/bottom, Revision "A" 16 50
0353-12-402 - Shade fins, middle 8 25
0353-12-403 - Shade fins, circular 4 12
0353-12-41 - Shade connector plate 8 25
0353-12-42B - Bottom SFE mount, Revision "B" 2 6
0353-13-19 - Connector Housing, eSATA 1 3
0353-13-20 - Connector Panel, eSATA 1 3
0353-19-02 - CF support 1 3
0353-19-17 - Multi-camera PCB Mount, Aluminum 9 28
0353-19-64D - SFE Module, Base, Rev "D" 10 33 MAKE IN USA
0353-19-641D - SFE Module, Base, with shifted lens center, Rev "D" 16 52 MAKE IN USA
0353-19-642 - SFE mount spacer 4 12 MAKE IN USA
0353-19-65B - SFE Plate, revision "B" 26 85 MAKE IN USA
0353-19-66C - Pano head external body top/bottom Rev "C" 2 6
0353-19-671 - Pano head internal body top/bottom, half 4 12
0353-19-68 - Spacer plate 1 3
0353-19-69 - Pano head external body, middle section 1 3
0353-19-70 - Pano head internal body middle, half 2 6
0353-19-71 - PCB Support 8 25
0353-19-72 - PCB Mount Rev. "A" 8 25
0353-19-73A - PCB Rail Mount, back, Revision "A" 6 12
0353-19-732 - PCB Rail Mount, back, top 1 3
0353-19-733 - Riser board support 2 6
0353-19-74B - PCB Rail Mount, front Revision "B" 4 12
0353-19-742 - Bottom unit connector panel 1 3
0353-19-743 - Cable holder 4 12
0353-19-744B - Cable support bracket, Revision "B" 2 6
0353-19-76 - SSD Rail Mount 11 35
0353-19-77 - FPC Holder 27 85
0353-19-771 - Cable clamp 6 12
0353-19-78 - FPC Holder, short 2 6
0353-19-791 - PCB support panel 1 3
0353-19-80A - Rail Support, Top, Revision "A" 1 3
0353-19-81 - Tube Body, Bottom 1 3
0353-19-82 - Tube Lock 1 3
0353-19-83 - Ring, Stainless Steel OD=69.5mm ID=64.5mm t=2mm 2 6
0353-19-84 - Tube Rail, OD=0.25", ID=0.152", l=718mm 4 12 MAKE in USA
0353-19-841A - Tube Rail, OD=0.25", ID=0.152", l=913mm 8 24 MAKE in USA
0353-19-85 - Ring 1 3
0353-19-86 - Hose Connector, Network 1 3
0353-19-87 - Hose Connector, SATA 1 3
0353-19-88 - Tube Adapter 2 6
0353-19-89 - Tube Lock 4 12
0353-19-90 - IMU Mount, Bottom 1 3
0353-19-91 - IMU Mount, Top 1 3
0353-19-92 - Spacer, IMU Mount 4 12
0353-19-93 - Bracket Fixating 2 8
0353-19-94 - Sensor PCB cover 26 85 MAKE IN USA
0353-19-95 - Tube 78 250 MAKE IN USA
00353-19-97 - Support rod 78 250 MAKE IN USA
00353-19-98 - Support rod cap 78 250 MAKE IN USA
0353-19-99-18 - Compensation ring, l=1.8mm 26 85 MAKE IN USA
0353-19-100 - Antenna plate 1 3
0353-60-04 - Aluminum extrusion for the shade fins,top 10 meters
0353-60-05 - Aluminum extrusion for the shade fins,middle 10 meters

The Quote is requested for the Quantity needed for 3 Units (as listed in column "Qty Total"), and 10 Units.

Please, read the Suppliers Terms and Conditions and send the Proposals by e-mail: supplies@elphel.com

Retrieved from "https://wiki.elphel.com/index.php?title=Quote_1A&oldid=12134"