Difference between revisions of "Elphel camera parts"

From ElphelWiki
Jump to: navigation, search
Line 111: Line 111:
 
|-
 
|-
 
|}
 
|}
 +
== 0353-20 - custom mounting parts ==
 +
=== 0353-20-01 - standoff, M2/M2.5, 14.5mm high, DIA 4.5mm ===
 +
{| border="0" cellpadding="2"
 +
|-
 +
| [[Image:0353-20-01.jpeg|thumb|[[Media:0353-20-01.stp.tar.gz|3d (step)]]  [[Media:0353-20-01.dxf.tar.gz|2d (dxf)]]  [[Media:0353-20-01.pdf|2d (pdf)]]]] ||
 +
|-
 +
|}
 +
== 0353-30 - insulator tubing, spacers, tapes ==
 +
=== 0353-30-01 - insulator tubing, l=12.5mm , ID=4.5MM (heat shrink OK) ===
 +
{| border="0" cellpadding="2"
 +
|-
 +
| [[Image:0353-30-01.jpeg|thumb|[[Media:0353-30-01.stp.tar.gz|3d (step)]]  [[Media:0353-30-01.dxf.tar.gz|2d (dxf)]]  [[Media:0353-30-01.pdf|2d (pdf)]]]] ||
 +
|-
 +
|}
 +
== 0353-60 - custom extruded profiles ==
 +
=== 0353-60-01 - aluminum extrusion for camera bottoms ===
 +
=== 0353-60-02 - aluminum extrusion for camera tops ===
 +
== 0353-70 - optical components ==
 +
=== 0353-70-01 - IR cutoff filter, DIA 20.0mm, t=0.3mm ===
 +
== 0353-80    - other standard parts ==
 +
== 0353-85    - threaded spacers for other than M2 and M2.5 ==
 +
== 0353-86    - threaded spacers for M2.5 ==
 +
== 0353-87    - threaded spacers for M2 ==
 +
== 0353-88    - unthreaded spacers for other than M2 and M2.5 ==
 +
== 0353-89    - unthreaded spacers for M2.5 ==
 +
== 0353-90    - unthreaded spacers for M2 ==
 +
=== 0353-90-01  - spacer, l=4mm (~McMaster p/n 92510A005 - approximate to metric) ===
 +
== 0353-91    - nuts for other than M2 and M2.5 ==
 +
== 0353-92    - nuts for M2.5 ==
 +
== 0353-93    - nuts for M2 ==
 +
== 0353-94    - washers for other than M2 and M2.5 ==
 +
== 0353-95    - washers for M2.5 ==
 +
== 0353-96    - washers for M2 ==
 +
=== 0353-96-01  - washer, stainless steel,  ===
 +
== 0353-97    - screws other than M2 and M2.5 ==
 +
== 0353-98    - screws, metric, M2.5 ==
 +
=== 0353-98-01  - screw, M2.5, Socket cap, Black anodized,  l=6mm (McMaster p/n 91239A704 ) ===
 +
=== 0353-98-02  - screw, M2.5, Socket cap, flat, l=6mm (McMaster p/n 92125A084 ) ===
 +
== 0353-99    - screws, metric, M2
 +
=== 0353-99-01  - screw, M2, Socket cap, Black anodized,  l=6mm (McMaster p/n 91239A704 )  ===
 +
=== 0353-99-02  - screw, M2, Socket cap, Stainless steel,  l=10mm (McMaster p/n ) ===
 +
=== 0353-99-03  - screw, M2, Socket cap, Stainless steel,  l=12mm (McMaster p/n ) ===
 +
=== 0353-99-04  - screw, M2, philips, flat l=3mm                  (McMaster p/n ) ===

Revision as of 12:07, 2 June 2008

Contents

0353-00 - PCB assemblies

0353-00-01 - 10353 rev E assembly

3d (step)  2d (dxf)  2d (pdf)
 Notes:Most individual components are not shown in the model.

0353-00-02 - 10369 rev A assembly

3d (step)  2d (dxf)  2d (pdf)
 Notes:Most individual components are not shown in the model.

0353-00-03 - 103693 rev A assembly

3d (step)  2d (dxf)  2d (pdf)
 Notes:Most individual components are not shown in the model.

0353-00-04 - 103691 rev A assembly

3d (step)  2d (dxf)  2d (pdf)
 Notes:Most individual components are not shown in the model.

0353-01 - cable assemblies

0353-02 - other electronic assemblies

0353-02-01 - CF card

Major camera enclosure parts

0353-10 - bottoms

0353-10-01 - camera bottom, l=104.77mm

3d (step)  2d (dxf)  2d (pdf)

0353-11 - tops

0353-11-01 - camera top plain (no connector holes), l=104.77mm

3d (step)  2d (dxf)  2d (pdf)

0353-11-02 - camera top with connector holes for the 10369 (serial port, optoisolated I/O), l=104.77mm

3d (step)  2d (dxf)  2d (pdf)

0353-12 - front ends

0353-12-01 - Sensor front end for 10318/10338 boards

3d (step)  2d (dxf)  2d (pdf)

0353-13 - back panels

0353-13-01 - Back panel, only network (RJ45) connector

0353-13-02 - Back panel, with holes for network, SATA and USB connectors

3d (step)  2d (dxf)  2d (pdf)

0353-17 - decals/overlays

0353-17-01 - back panel overlay, network only

3d (step)  2d (dxf)  2d (pdf)

0353-17-02 - back panel overlay for 10369A (RJ45, SATA, USB)

3d (step)  2d (dxf)  2d (pdf)

0353-17-03 - bottom overlay

3d (step)  2d (dxf)  2d (pdf)

0353-18 - parts external other

0353-18-01 - tripod mount, 1/4-20 thread

3d (step)  2d (dxf)  2d (pdf)

0353-18-02 - connector cover

3d (step)  2d (dxf)  2d (pdf)

0353-19 - parts internal other

0353-19-01 - CF support

3d (step)  2d (dxf)  2d (pdf)

0353-20 - custom mounting parts

0353-20-01 - standoff, M2/M2.5, 14.5mm high, DIA 4.5mm

3d (step)  2d (dxf)  2d (pdf)

0353-30 - insulator tubing, spacers, tapes

0353-30-01 - insulator tubing, l=12.5mm , ID=4.5MM (heat shrink OK)

3d (step)  2d (dxf)  2d (pdf)

0353-60 - custom extruded profiles

0353-60-01 - aluminum extrusion for camera bottoms

0353-60-02 - aluminum extrusion for camera tops

0353-70 - optical components

0353-70-01 - IR cutoff filter, DIA 20.0mm, t=0.3mm

0353-80 - other standard parts

0353-85 - threaded spacers for other than M2 and M2.5

0353-86 - threaded spacers for M2.5

0353-87 - threaded spacers for M2

0353-88 - unthreaded spacers for other than M2 and M2.5

0353-89 - unthreaded spacers for M2.5

0353-90 - unthreaded spacers for M2

0353-90-01 - spacer, l=4mm (~McMaster p/n 92510A005 - approximate to metric)

0353-91 - nuts for other than M2 and M2.5

0353-92 - nuts for M2.5

0353-93 - nuts for M2

0353-94 - washers for other than M2 and M2.5

0353-95 - washers for M2.5

0353-96 - washers for M2

0353-96-01 - washer, stainless steel,

0353-97 - screws other than M2 and M2.5

0353-98 - screws, metric, M2.5

0353-98-01 - screw, M2.5, Socket cap, Black anodized, l=6mm (McMaster p/n 91239A704 )

0353-98-02 - screw, M2.5, Socket cap, flat, l=6mm (McMaster p/n 92125A084 )

== 0353-99 - screws, metric, M2

0353-99-01 - screw, M2, Socket cap, Black anodized, l=6mm (McMaster p/n 91239A704 )

0353-99-02 - screw, M2, Socket cap, Stainless steel, l=10mm (McMaster p/n )

0353-99-03 - screw, M2, Socket cap, Stainless steel, l=12mm (McMaster p/n )

0353-99-04 - screw, M2, philips, flat l=3mm (McMaster p/n )

Retrieved from "https://wiki.elphel.com/index.php?title=Elphel_camera_parts&oldid=4794"