Difference between revisions of "10369"

From ElphelWiki
Jump to: navigation, search
Line 15: Line 15:
 
** EEPROM for the board identification and configuration
 
** EEPROM for the board identification and configuration
 
==== Connectors ====
 
==== Connectors ====
−
===== J2 - IDE =====
+
 
−
{| border="1" cellpadding="2"
+
 
 +
----
 +
 
 +
===== J1 - AUX =====
 +
{| class="wikitable" style="background:#eeeeee; "  border="1"
 +
|+ AUX connector (from 10353)
 +
|-
 +
! Pin !! Signal !! Notes !! !! Pin !! Signal !! Notes
 +
|-
 +
| 1 || GND || || ||  16 || EXT[10] || GPIO
 +
|-
 +
| 2 || GND || || ||  17 || EXT[9] || GPIO
 +
|-
 +
| 3 || EXT[0] || GPIO || ||  18 || EXT[11] || GPIO
 +
|-
 +
| 4 || EXT[2] || GPIO || ||  19 || GND ||
 
|-
 
|-
−
| Pin || Signal || Notes
+
| 5 || EXT[1] || GPIO || ||  20 || GND ||
 
|-
 
|-
−
| 1 || IDE_RST ||  
+
| 6 || EXT[3] || GPIO || ||  21 || CTS || RS232
 
|-
 
|-
−
| 2 || GND ||
+
| 7 || GND || || ||  22 || RTS || RS232
 
|-
 
|-
−
| 3 || IDE_D[7] ||
+
| 8 || GND || || ||  23 || RXD || RS232
 
|-
 
|-
−
| 4 || IDE_D[8] ||
+
| 9 || EXT[4] || GPIO || ||  24 || TXD || RS232
 
|-
 
|-
−
| 5 || IDE_D[6] ||
+
| 10 || EXT[6] || GPIO || ||  25 || +3.3V ||
 
|-
 
|-
−
| 6 || IDE_D[9] ||
+
| 11 || EXT[5] || GPIO || ||  26 || +3.3V ||
 
|-
 
|-
−
| 7 || IDE_D[5] ||
+
| 12 || EXT[7] || GPIO || ||  27 || U0VM || USB
 
|-
 
|-
−
| 8 || IDE_D[10] ||
+
| 13 || GND || || ||  28 || U0VP || USB
 
|-
 
|-
−
| 9 || IDE_D[4] ||
+
| 14 || GND || || ||  29 || +3.3V ||
 
|-
 
|-
−
| 10 || IDE_D[11] ||
+
| 15 || EXT[8] || GPIO || ||  30 || +3.3V ||
 
|-
 
|-
−
| 11 || IDE_D[3] ||
+
|}
 +
 
 +
 
 +
----
 +
 
 +
===== J2 - IDE =====
 +
{| class="wikitable" style="background:#eeeeee; "  border="1"
 +
|+ IDE connector (from 10353)
 
|-
 
|-
−
| 12 || IDE_D[12] ||
+
! Pin !! Signal !! Notes !! !! Pin !! Signal !! Notes
 
|-
 
|-
−
| 13 || IDE_D[2] ||
+
| 1 || IDE_RST || || ||  21 || IDE_DMARQ ||
 
|-
 
|-
−
| 14 || IDE_D[13] ||
+
| 2 || GND || || || 22 || GND ||
 
|-
 
|-
−
| 15 || IDE_D[1] ||
+
| 3 || IDE_D[7] || || || 23 || IDE_IOW ||
 
|-
 
|-
−
| 16 || IDE_D[14] ||
+
| 4 || IDE_D[8] || || || 24 || GND ||
 
|-
 
|-
−
| 17 || IDE_D[0] ||
+
| 5 || IDE_D[6] || || || 25 || IDE_IOR ||
 
|-
 
|-
−
| 18 || IDE_D[15] ||
+
| 6 || IDE_D[9] || || || 26 || GND ||
 
|-
 
|-
−
| 19 || GND ||
+
| 7 || IDE_D[5] || || || 27 || IDE_IORDY ||
 
|-
 
|-
−
| 20 || GND ||
+
| 8 || IDE_D[10] || || || 28 || GND ||
 
|-
 
|-
−
| 21 || IDE_DMARQ ||
+
| 9 || IDE_D[4] || || || 29 || IDE_DMACK ||
 
|-
 
|-
−
| 22 || GND ||
+
| 10 || IDE_D[11] || || || 30 || GND ||
 
|-
 
|-
−
| 23 || IDE_IOW ||
+
| 11 || IDE_D[3] || || || 31 || IDE_INTRQ ||
 
|-
 
|-
−
| 24 || GND ||
+
| 12 || IDE_D[12] || || || 32 || EXT_OE || not used
 
|-
 
|-
−
| 25 || IDE_IOR ||
+
| 13 || IDE_D[2] || || || 33 || IDE_A[1] ||
 
|-
 
|-
−
| 26 || GND ||
+
| 14 || IDE_D[13] || || || 34 || -- ||
 
|-
 
|-
−
| 27 || IDE_IORDY ||
+
| 15 || IDE_D[1] || || || 35 || IDE_A[0] ||
 
|-
 
|-
−
| 28 || GND ||
+
| 16 || IDE_D[14] || || || 36 || IDE_A[2] ||
 
|-
 
|-
−
| 29 || IDE_DMACK ||
+
| 17 || IDE_D[0] || || || 37 || IDE_CS0 ||
 
|-
 
|-
−
| 30 || GND ||
+
| 18 || IDE_D[15] || || || 38 || IDE_CS1 ||
 
|-
 
|-
−
| 31 || IDE_INTRQ ||
+
| 19 || GND || || || 39 || -- ||
 
|-
 
|-
−
| 32 || EXT_OE || not used
+
| 20 || GND || || || 40 || GND ||
 
|-
 
|-
−
| 33 || IDE_A[1] ||
+
|}
 +
 
 +
 
 +
----
 +
 
 +
===== J3 - Power =====
 +
{| class="wikitable" style="background:#eeeeee; "  border="1"
 +
|+ Power connector (from 10353)
 
|-
 
|-
−
| 34 || -- ||
+
! Pin !! Signal !! Notes !! !! Pin !! Signal !! Notes
 
|-
 
|-
−
| 35 || IDE_A[0] ||
+
| 1 || GND || || ||  3 || +3.3V ||
 
|-
 
|-
−
| 36 || IDE_A[2] ||
+
| 2 || -48V || isolated, primary || || 22 || +48V || isolated, primary
 
|-
 
|-
−
| 37 || IDE_CS0 ||
+
|}
 +
'' '''Note:''' +/- 48V are non-regulated input power rails. For 12V or 24V camera modifications these lines will also have +/-12V or +/-24V. ''
 +
 
 +
 
 +
----
 +
 
 +
===== J4 - Power (to next boards) =====
 +
{| class="wikitable" style="background:#eeeeee; "  border="1"
 +
|+ Power connector (from 10353)
 
|-
 
|-
−
| 38 || IDE_CS1 ||
+
! Pin !! Signal !! Notes !! !! Pin !! Signal !! Notes
 
|-
 
|-
−
| 39 || -- ||
+
| 1 || GND || || ||  3 || +3.3V ||
 
|-
 
|-
−
| 40 || GND ||
+
| 2 || -48V || isolated, primary || || 22 || +48V || isolated, primary
 
|-
 
|-
 
|}
 
|}
 +
'' '''Note:''' J4 is normally not installed. It is used in some camera modificatios where ther is another board on top of the 10369 that needs power - J4 is located oppposite to J3, same as on 10353 system board. ''
  
 
[[Image:103691_sm.jpeg|frame|[[Media:103691.jpeg|103691: Dual CF card adapter/riser board]]]]
 
[[Image:103691_sm.jpeg|frame|[[Media:103691.jpeg|103691: Dual CF card adapter/riser board]]]]
 
[[Image:103692_sm.jpeg|frame|[[Media:103692.jpeg|103692: 1.8" ZIF-type HDD adapter board]]]]
 
[[Image:103692_sm.jpeg|frame|[[Media:103692.jpeg|103692: 1.8" ZIF-type HDD adapter board]]]]
 
[[Image:103693_sm.jpeg|frame|[[Media:103693.jpeg|103693: External USB connector adapter board]]]]
 
[[Image:103693_sm.jpeg|frame|[[Media:103693.jpeg|103693: External USB connector adapter board]]]]

Revision as of 22:11, 24 June 2008

10369

10369 board, top view
10369 board, bottom view
10369 Circuit Diagram, Parts List, PCB layout     10369 Gerber files

10369 interface board is an extension board for the Elphel 353/363 series cameras.

  • It provides multiple interfaces and peripherals to the camera:
    • SATA port for external disk drives
    • Compact Flash (in "True IDE" mode) and IDE HDD ports (with adapter/riser boards: 103691, 103692)
    • RS-232 port
    • Opto-isolated I/O port for synchronizing the camera or synchronizing together multiple cameras (modular RJ11 external connector)
    • Opto-isolated I/O port for synchronizing multiple camera modules in the same enclosure (flex cable connectors)
    • Digital thermometer with internal ("system") and external thermal sensor (emitter-base junction of PNP or NPN transistor)
    • Fan driver, controlled by the digital thermometer with programmable on/off temperature
    • Clock/calendar with the super-capacitor backup power
    • EEPROM for the board identification and configuration

Connectors

J1 - AUX
AUX connector (from 10353)
Pin Signal Notes Pin Signal Notes
1 GND 16 EXT[10] GPIO
2 GND 17 EXT[9] GPIO
3 EXT[0] GPIO 18 EXT[11] GPIO
4 EXT[2] GPIO 19 GND
5 EXT[1] GPIO 20 GND
6 EXT[3] GPIO 21 CTS RS232
7 GND 22 RTS RS232
8 GND 23 RXD RS232
9 EXT[4] GPIO 24 TXD RS232
10 EXT[6] GPIO 25 +3.3V
11 EXT[5] GPIO 26 +3.3V
12 EXT[7] GPIO 27 U0VM USB
13 GND 28 U0VP USB
14 GND 29 +3.3V
15 EXT[8] GPIO 30 +3.3V


J2 - IDE
IDE connector (from 10353)
Pin Signal Notes Pin Signal Notes
1 IDE_RST 21 IDE_DMARQ
2 GND 22 GND
3 IDE_D[7] 23 IDE_IOW
4 IDE_D[8] 24 GND
5 IDE_D[6] 25 IDE_IOR
6 IDE_D[9] 26 GND
7 IDE_D[5] 27 IDE_IORDY
8 IDE_D[10] 28 GND
9 IDE_D[4] 29 IDE_DMACK
10 IDE_D[11] 30 GND
11 IDE_D[3] 31 IDE_INTRQ
12 IDE_D[12] 32 EXT_OE not used
13 IDE_D[2] 33 IDE_A[1]
14 IDE_D[13] 34 --
15 IDE_D[1] 35 IDE_A[0]
16 IDE_D[14] 36 IDE_A[2]
17 IDE_D[0] 37 IDE_CS0
18 IDE_D[15] 38 IDE_CS1
19 GND 39 --
20 GND 40 GND


J3 - Power
Power connector (from 10353)
Pin Signal Notes Pin Signal Notes
1 GND 3 +3.3V
2 -48V isolated, primary 22 +48V isolated, primary

Note: +/- 48V are non-regulated input power rails. For 12V or 24V camera modifications these lines will also have +/-12V or +/-24V.


J4 - Power (to next boards)
Power connector (from 10353)
Pin Signal Notes Pin Signal Notes
1 GND 3 +3.3V
2 -48V isolated, primary 22 +48V isolated, primary

Note: J4 is normally not installed. It is used in some camera modificatios where ther is another board on top of the 10369 that needs power - J4 is located oppposite to J3, same as on 10353 system board.

103691: Dual CF card adapter/riser board
103692: 1.8" ZIF-type HDD adapter board
103693: External USB connector adapter board
Retrieved from "https://wiki.elphel.com/index.php?title=10369&oldid=4863"