Difference between revisions of "Elphel camera parts 0353-60"

Revision as of 16:27, 25 July 2010

0353-60 - custom extruded profiles

0353-60-01 - aluminum extrusion for camera bottoms

0353-60-02 - aluminum extrusion for camera tops

0353-60-03 - aluminum extrusion for camera tops/bottoms (49x43.5)

0353-61 - packaging cases

0353-61-01 - SKB case 9.25" H x 7.125" W x 4.125" D (inside), 3I-0907-4B-C

0353-61-02 - SKB Mil-Standard Injection Molded Cases: 16"L x 10"W x 5 1/2"H (Inside) - 3I1610-5B

0353-61-03 - SKB ATA Utility Case: 14 5/8" H x 18 1/4" W x 14 1/8" D (outside) - 1SKB-1713

0353-62 - packaging foam - custom cut

0353-62-01 - Foam Bottom for SKB case 9.25" H x 7.125" W x 4.125" D (inside)

3d (step)  2d (dxf)  2d (pdf)

0353-62-02 - Foam for SKB Mil-Standard Injection Molded Cases: 16"L x 10"W x 5 1/2"H (Inside) - 3I1610-5B

0353-62-031 - Foam for Eyesis Case - bottom : 174mm x 515mm x 1265mm

3d (step)  2d (dxf)  2d (pdf)

0353-62-032 - Foam for Eyesis Case - top : 162mm x 515mm x 1265mm

3d (step)  2d (dxf)  2d (pdf)

0353-62-033 - Foam infill for Eyesis Case - bottom : 40mm x 134mm x 169mm

3d (step)  2d (dxf)  2d (pdf)

0353-62-033 - Foam infill for Eyesis Case - bottom : 40mm x 46mm x 169mm

0353-62-04 - Foam Top for SKB case 9.25" H x 7.125" W x 4.125" D (inside)

3d (step)  2d (dxf)  2d (pdf)