Difference between revisions of "Eyesis gui"
From ElphelWiki
| Line 33: | Line 33: | ||
* Unpack the archive (should get "jquery-ui-1.8.4.custom/") | * Unpack the archive (should get "jquery-ui-1.8.4.custom/") | ||
| − | == | + | == User Guide == |
| + | |||
| + | ====1. GUI page==== | ||
open http://127.0.0.1/eyesis.html | open http://127.0.0.1/eyesis.html | ||
| + | |||
| + | |||
| + | ====2. Quick Start==== | ||
| + | ''Note: There is a program called '''camogm''' for recording running on all 3 sub-cameras. Once the GUI page is accessed or refreshed a launch request is issued - it can take some time (~20-30sec)''. | ||
| + | * Set the IPs (correct ips are 192.168.0.xx1,192.168.0.xx2,192.168.0.xx3). Other parameters can be left default - access the GUI page. After camogms are started the "Camogm Status" will indicate that. | ||
| + | * Check the images | ||
| + | 1. Go to the '''Other''' tab - switch on the ''Color bars pattern''. | ||
| + | 2. Press ''Get Previews'' button (it is ok if the images are cut from the bottom - it's the browser problem - just press the button again) | ||
| + | 3. turn off the color pattern mode. | ||
| + | * Go to the '''Camera''' tab and press the '''Enable JP4''' button. | ||
| + | * <font color=red>'''RECORD'''</font> | ||
| + | |||
| + | |||
| + | ====3. Tabs==== | ||
| + | =====Network===== | ||
| + | * Assign the correct IPs (currently works only in 192.168.0.x subnetwork + the correct IPs are 192.168.0.xx1,192.168.0.xx2, 192.168.0.xx3) | ||
| + | * Set refresh interval (status requests period) (can be left default) | ||
| + | =====Camogm===== | ||
| + | =====Camera===== | ||
| + | =====Quality===== | ||
| + | =====Other===== | ||
== Links == | == Links == | ||
Revision as of 12:01, 24 August 2010
Contents
About
Eyesis GUI allows to:
- change sensors' settings
- change compression quality
- start/stop recording
- check images and monitor sub-units status information
Download & Install
Ubuntu Linux
Package name: elphel-eyesis-gui
Dependencies: apache2, php5
There is a prebuilt package for Ubuntu users at elphel-eyesis-gui PPA.
To install it, use the following commands, see help for more information.
sudo add-apt-repository ppa:andersonnotgood/elphel sudo apt-get update sudo apt-get install elphel-eyesis-gui
Other platforms
- Get the sources from http://elphel.cvs.sourceforge.net/viewvc/elphel/eyesis353/elphel-eyesis-gui/
- Copy to you web server folder the following files:
eyesis.html, eyesis.js, camogmgui_multiple.php jquery-ui-1.8.4.custom.tar.gz
- Unpack the archive (should get "jquery-ui-1.8.4.custom/")
User Guide
1. GUI page
open http://127.0.0.1/eyesis.html
2. Quick Start
Note: There is a program called camogm for recording running on all 3 sub-cameras. Once the GUI page is accessed or refreshed a launch request is issued - it can take some time (~20-30sec).
- Set the IPs (correct ips are 192.168.0.xx1,192.168.0.xx2,192.168.0.xx3). Other parameters can be left default - access the GUI page. After camogms are started the "Camogm Status" will indicate that.
- Check the images
1. Go to the Other tab - switch on the Color bars pattern. 2. Press Get Previews button (it is ok if the images are cut from the bottom - it's the browser problem - just press the button again) 3. turn off the color pattern mode.
- Go to the Camera tab and press the Enable JP4 button.
- RECORD
3. Tabs
Network
- Assign the correct IPs (currently works only in 192.168.0.x subnetwork + the correct IPs are 192.168.0.xx1,192.168.0.xx2, 192.168.0.xx3)
- Set refresh interval (status requests period) (can be left default)
