Difference between revisions of "Eyesis workflow"
From ElphelWiki
| Line 2: | Line 2: | ||
The following page describes the Eyesis camera post-processing procedures. | The following page describes the Eyesis camera post-processing procedures. | ||
| − | == | + | ==Eyesis Output== |
[[Image:Eyesis_frames.jpg|thumb|500px|Fig.1 Eyesis frames]] | [[Image:Eyesis_frames.jpg|thumb|500px|Fig.1 Eyesis frames]] | ||
| − | * 3x | + | * 3x HDDs, each containing *.mov files from 3x 3-sensor modules (a single HDD is connected to an individual camera module). |
| − | * Each frame in a *.mov file is a combination of frames from 3 sensors glued vertically. | + | * Each frame in a *.mov file is a combination of frames from 3 sensors glued vertically - triplet. |
| − | * The | + | * The modules are numbered - 1,2,3 - having individual ip address: |
| + | 192.168.0.221 | ||
| + | 192.168.0.222 | ||
| + | 192.168.0.223 | ||
| + | * The sub images are [1.1, 1.2, 1.3], [2.1, 2.2, 2.3], [3.1, 3.2, 3.3]. 3.1 is the fisheye image. | ||
* The frames in *.movs are indexed. | * The frames in *.movs are indexed. | ||
| − | * | + | * A single image format is JP4. |
* Corresponding frames have the same time stamps generated by the 1st camera. | * Corresponding frames have the same time stamps generated by the 1st camera. | ||
* The 1st camera frames are geotagged. | * The 1st camera frames are geotagged. | ||
Revision as of 11:10, 3 December 2010
Contents
Preface
The following page describes the Eyesis camera post-processing procedures.
Eyesis Output
- 3x HDDs, each containing *.mov files from 3x 3-sensor modules (a single HDD is connected to an individual camera module).
- Each frame in a *.mov file is a combination of frames from 3 sensors glued vertically - triplet.
- The modules are numbered - 1,2,3 - having individual ip address:
192.168.0.221 192.168.0.222 192.168.0.223
- The sub images are [1.1, 1.2, 1.3], [2.1, 2.2, 2.3], [3.1, 3.2, 3.3]. 3.1 is the fisheye image.
- The frames in *.movs are indexed.
- A single image format is JP4.
- Corresponding frames have the same time stamps generated by the 1st camera.
- The 1st camera frames are geotagged.
Post-Processing Setup
- HDDs are put into a processing PC and the data is copied.
Workflow
1. Processing panorama possible solutions
Stitching scripts samples.
- JP4 images can be extracted and converted to DNGs from *.MOVs by the program movie2dng.
- Dcraw and the Hugin tools can used for stitching (a template *.pto for it should be created once).
