Difference between revisions of "Request for Quote"

From ElphelWiki
Jump to: navigation, search
 
(7 intermediate revisions by the same user not shown)
Line 5: Line 5:
 
! Part !! QTY per Unit !! Notes
 
! Part !! QTY per Unit !! Notes
 
|-
 
|-
−
| [[Elphel_camera_parts_0353-10#0353-10-23_-_Tube_Body|0353-10-23 - Tube Body]] || 1 ||
+
| [[Elphel_camera_parts_0353-10#0353-10-23_-_Tube_Body|0353-10-23 - Tube Body]] || 1 || MAKE in USA
 +
|-
 +
| [[Elphel_camera_parts_0353-10#0353-10-231_-_Tube_Body_.28with_bottom_lens_openings.29|0353-10-231 - Tube Body (with bottom lens openings) ]] || 1 || MAKE in USA
 
|-
 
|-
 
| [[Elphel_camera_parts_0353-10#0353-10-24_-_Tube_Body|0353-10-24 - Tube Body, IMU]]  || 1 ||
 
| [[Elphel_camera_parts_0353-10#0353-10-24_-_Tube_Body|0353-10-24 - Tube Body, IMU]]  || 1 ||
Line 11: Line 13:
 
| [[Elphel_camera_parts_0353-10#0353-10-25_-_Tube_Body|0353-10-25 - Mount Tube]]  || 1 ||
 
| [[Elphel_camera_parts_0353-10#0353-10-25_-_Tube_Body|0353-10-25 - Mount Tube]]  || 1 ||
 
|-
 
|-
−
| [[Elphel_camera_parts_0353-10#0353-11-131_-_Tube_Body|0353-11-131 - Cap, bottom ring]]  || 1 ||
+
| [[Elphel_camera_parts_0353-11#0353-11-131_-_Tube_Body|0353-11-131 - Cap, bottom ring]]  || 1 ||
 
|-
 
|-
−
| [[Elphel_camera_parts_0353-10#0353-11-132_-_Tube_Body|0353-11-132 - Cap, top]]  || 1 ||
+
| [[Elphel_camera_parts_0353-11#0353-11-132_-_Tube_Body|0353-11-132 - Cap, top]]  || 1 ||
 
|-
 
|-
−
| [[Elphel_camera_parts_0353-10#0353-11-133_-_Tube_Body|0353-11-133 - GPS cap, middle ring]]  || 1 ||
+
| [[Elphel_camera_parts_0353-11#0353-11-133_-_Tube_Body|0353-11-133 - GPS cap, middle ring]]  || 1 ||
 
|-
 
|-
−
| [[Elphel_camera_parts_0353-10#0353-12-41_-_Tube_Body|0353-12-41 - Shade connector plate]]  || 8 ||
+
| [[Elphel_camera_parts_0353-12#0353-12-41_-_Tube_Body|0353-12-41 - Shade connector plate]]  || 8 ||
 
|-
 
|-
−
| [[Elphel_camera_parts_0353-10#0353-12-403_-_Tube_Body|0353-12-403 - Shade fins, circular]]  || 4 ||
+
| [[Elphel_camera_parts_0353-12#0353-12-42_-_Bottom_SFE_mount|0353-12-42 - Bottom SFE mount]]  || 2 ||NEW PART !
 
|-
 
|-
−
| [[Elphel_camera_parts_0353-10#0353-13-19_-_Tube_Body|0353-13-19 - Connector Housing, eSATA]]  || 1 ||
+
| [[Elphel_camera_parts_0353-12#0353-12-403_-_Tube_Body|0353-12-403 - Shade fins, circular]]  || 4 ||
 
|-
 
|-
−
| [[Elphel_camera_parts_0353-10#0353-13-20_-_Tube_Body|0353-13-20 - Connector Panel, eSATA]]  || 1 ||
+
| [[Elphel_camera_parts_0353-13#0353-13-19_-_Tube_Body|0353-13-19 - Connector Housing, eSATA]]  || 1 ||
 
|-
 
|-
−
| [[Elphel_camera_parts_0353-10#0353-19-17_-_Tube_Body|0353-19-17 - Multi-camera PCB Mount, Aluminum]]  || 8 ||
+
| [[Elphel_camera_parts_0353-13#0353-13-20_-_Tube_Body|0353-13-20 - Connector Panel, eSATA]]  || 1 ||
 
|-
 
|-
−
| [[Elphel_camera_parts_0353-19#0353-19-61_-_Guide_pin.2C_threaded|0353-19-61 - Guide pin, threaded]]  || 72 ||
+
| [[Elphel_camera_parts_0353-19#0353-19-17_-_Tube_Body|0353-19-17 - Multi-camera PCB Mount, Aluminum]]  || 8 || QTY Change ! +1
 
|-
 
|-
−
| [[Elphel_camera_parts_0353-19#0353-19-64_-_SFE_Module.2C_Base|0353-19-64 - SFE Module, Base]]  || 24 ||
+
| [[Elphel_camera_parts_0353-19#0353-19-61_-_Guide_pin.2C_threaded|0353-19-61 - Guide pin, threaded]]  || 72 || QTY Change ! +6
 
|-
 
|-
−
| [[Elphel_camera_parts_0353-19#0353-19-65_-_SFE_Plate|0353-19-65 - SFE Plate]]  || 24 ||
+
| [[Elphel_camera_parts_0353-19#0353-19-64_-_SFE_Module.2C_Base|0353-19-64 - SFE Module, Base]]  || 24 || QTY Change ! +2
 +
|-
 +
| [[Elphel_camera_parts_0353-19#0353-19-65_-_SFE_Plate|0353-19-65 - SFE Plate]]  || 24 || QTY Change ! +2
 
|-
 
|-
 
| [[Elphel_camera_parts_0353-19#0353-19-66_-_Pano_head_external_body_top.2Fbottom|0353-19-66 - Pano head external body top/bottom]]  || 2 ||
 
| [[Elphel_camera_parts_0353-19#0353-19-66_-_Pano_head_external_body_top.2Fbottom|0353-19-66 - Pano head external body top/bottom]]  || 2 ||
Line 47: Line 51:
 
| [[Elphel_camera_parts_0353-19#0353-19-72_-_PCB_Mount|0353-19-72 - PCB Mount]]  || 8 ||
 
| [[Elphel_camera_parts_0353-19#0353-19-72_-_PCB_Mount|0353-19-72 - PCB Mount]]  || 8 ||
 
|-
 
|-
−
| [[Elphel_camera_parts_0353-19#0353-19-73_-_PCB_Rail_Mount.2C_back|0353-19-73 - PCB Rail Mount, back]]  || 4 ||
+
| [[Elphel_camera_parts_0353-19#0353-19-73B_-_PCB_Rail_Mount.2C_back.2C_Revision_.22B.22|0353-19-73B - PCB Rail Mount, back]]  || 4 || Revision B
 
|-
 
|-
 
| [[Elphel_camera_parts_0353-19#0353-19-74_-_PCB_Rail_Mount.2C_front|0353-19-74 - PCB Rail Mount, front]]  || 4 ||
 
| [[Elphel_camera_parts_0353-19#0353-19-74_-_PCB_Rail_Mount.2C_front|0353-19-74 - PCB Rail Mount, front]]  || 4 ||
 +
|-
 +
| [[Elphel_camera_parts_0353-19#0353-19-741_-PCB_Rail_Mount.2C_extra|0353-19-741 - PCB Rail Mount, extra]]  || 1 || NEW PART !
 
|-
 
|-
 
| [[Elphel_camera_parts_0353-19#0353-19-75_-_Universal_Rail_Mount|0353-19-75 - Universal Rail Mount]]  || 2 ||
 
| [[Elphel_camera_parts_0353-19#0353-19-75_-_Universal_Rail_Mount|0353-19-75 - Universal Rail Mount]]  || 2 ||
 
|-
 
|-
−
| [[Elphel_camera_parts_0353-19#0353-19-76_-_SSD_Rail_Mount|0353-19-76 - SSD Rail Mount]]  || 8 ||
+
| [[Elphel_camera_parts_0353-19#0353-19-76_-_SSD_Rail_Mount|0353-19-76 - SSD Rail Mount]]  || 8 || QTY Change !+3
 
|-
 
|-
−
| [[Elphel_camera_parts_0353-19#0353-19-77_-_FPC_Holder|0353-19-77 - FPC Holder]]  || 24 ||
+
| [[Elphel_camera_parts_0353-19#0353-19-77_-_FPC_Holder|0353-19-77 - FPC Holder]]  || 24 || QTY Change !+1
 
|-
 
|-
 
| [[Elphel_camera_parts_0353-19#0353-19-78_-_FPC_Holder.2C_Short|0353-19-78 - FPC Holder, short]]  || 2 ||
 
| [[Elphel_camera_parts_0353-19#0353-19-78_-_FPC_Holder.2C_Short|0353-19-78 - FPC Holder, short]]  || 2 ||
 
|-
 
|-
 
| [[Elphel_camera_parts_0353-19#0353-19-79_-_Bracket_for_0353-00-03.2F0353-00-25|0353-19-79 - Bracket for 0353-00-03/0353-00-25]]  || 1 ||
 
| [[Elphel_camera_parts_0353-19#0353-19-79_-_Bracket_for_0353-00-03.2F0353-00-25|0353-19-79 - Bracket for 0353-00-03/0353-00-25]]  || 1 ||
 +
|-
 +
| [[Elphel_camera_parts_0353-19#0353-19-791_-_PCB_support_panel|0353-19-791 - PCB support panel]]  || 1 || NEW PART !
 
|-
 
|-
 
| [[Elphel_camera_parts_0353-19#0353-19-80_-_Rail_Support.2C_Top|0353-19-80 - Rail Support, Top]]  || 1 ||
 
| [[Elphel_camera_parts_0353-19#0353-19-80_-_Rail_Support.2C_Top|0353-19-80 - Rail Support, Top]]  || 1 ||
Line 69: Line 77:
 
| [[Elphel_camera_parts_0353-19#0353-19-83_-_Ring.2C_Stainless_Steel_OD.3D69.5mm_ID.3D64.5mm_t.3D2mm|0353-19-83 - Ring, Stainless Steel OD=69.5mm ID=64.5mm t=2mm]]  || 2 ||
 
| [[Elphel_camera_parts_0353-19#0353-19-83_-_Ring.2C_Stainless_Steel_OD.3D69.5mm_ID.3D64.5mm_t.3D2mm|0353-19-83 - Ring, Stainless Steel OD=69.5mm ID=64.5mm t=2mm]]  || 2 ||
 
|-
 
|-
−
| [[Elphel_camera_parts_0353-19#0353-19-84_-_Tube_Rail.2C_OD.3D0.25.22.2C_ID.3D0.152.22.2C_l.3D718mm|0353-19-84 - Tube Rail, OD=0.25", ID=0.152", l=718mm]]  || 4 ||
+
| [[Elphel_camera_parts_0353-19#0353-19-84_-_Tube_Rail.2C_OD.3D0.25.22.2C_ID.3D0.152.22.2C_l.3D718mm|0353-19-84 - Tube Rail, OD=0.25", ID=0.152", l=718mm]]  || 4 || MAKE in USA
 +
|-
 +
| [[Elphel_camera_parts_0353-19#0353-19-841_-_Tube_Rail.2C_OD.3D0.25.22.2C_ID.3D0.152.22.2C_l.3D918mm|0353-19-841 - Tube Rail, OD=0.25", ID=0.152", l=918mm]]  || 4 || MAKE in USA
 
|-
 
|-
 
| [[Elphel_camera_parts_0353-19#0353-19-85_-_Ring|0353-19-85 - Ring]]  || 1 ||
 
| [[Elphel_camera_parts_0353-19#0353-19-85_-_Ring|0353-19-85 - Ring]]  || 1 ||
Line 88: Line 98:
 
|-
 
|-
 
| [[Elphel_camera_parts_0353-19#0353-19-93_-_Bracket.2C_Fixating|0353-19-93 - Bracket Fixating]]  || 4 ||
 
| [[Elphel_camera_parts_0353-19#0353-19-93_-_Bracket.2C_Fixating|0353-19-93 - Bracket Fixating]]  || 4 ||
 +
|-
 +
| [[Elphel_camera_parts_0353-60#0353-60-04_-_Aluminum_extrusion_for_the_shade_fins.2Ctop|0353-60-04 - Aluminum extrusion for the shade fins,top]]  || 10 meters ||
 +
|-
 +
| [[Elphel_camera_parts_0353-60#0353-60-05_-_Aluminum_extrusion_for_the_shade_fins.2C_middle|0353-60-05 - Aluminum extrusion for the shade fins,middle]]  || 10 meters ||
 +
|-
 +
| [[Elphel_camera_parts_0353-12#0353-12-401_-_Shade_fins.2C_top.2Fbottom|0353-12-401 - Shade fins, top/bottom]]  || 16 ||
 +
|-
 +
| [[Elphel_camera_parts_0353-12#0353-12-402_-_Shade_fins.2C_middle|0353-12-402 - Shade fins, middle]]  || 8 ||
 
|-
 
|-
 
|}
 
|}

Latest revision as of 14:48, 20 December 2012

Elphel, Inc. invites the machine shops to Quote manufacturing of the following parts for the new Eyesis 4Pi camera:

Camera Metal Parts
Part QTY per Unit Notes
0353-10-23 - Tube Body 1 MAKE in USA
0353-10-231 - Tube Body (with bottom lens openings) 1 MAKE in USA
0353-10-24 - Tube Body, IMU 1
0353-10-25 - Mount Tube 1
0353-11-131 - Cap, bottom ring 1
0353-11-132 - Cap, top 1
0353-11-133 - GPS cap, middle ring 1
0353-12-41 - Shade connector plate 8
0353-12-42 - Bottom SFE mount 2 NEW PART !
0353-12-403 - Shade fins, circular 4
0353-13-19 - Connector Housing, eSATA 1
0353-13-20 - Connector Panel, eSATA 1
0353-19-17 - Multi-camera PCB Mount, Aluminum 8 QTY Change ! +1
0353-19-61 - Guide pin, threaded 72 QTY Change ! +6
0353-19-64 - SFE Module, Base 24 QTY Change ! +2
0353-19-65 - SFE Plate 24 QTY Change ! +2
0353-19-66 - Pano head external body top/bottom 2
0353-19-67 - Pano head internal body top/bottom, half 4
0353-19-68 - Spacer plate 1
0353-19-69 - Pano head external body, middle section 1
0353-19-70 - Pano head internal body middle, half 2
0353-19-71 - PCB Support 8
0353-19-72 - PCB Mount 8
0353-19-73B - PCB Rail Mount, back 4 Revision B
0353-19-74 - PCB Rail Mount, front 4
0353-19-741 - PCB Rail Mount, extra 1 NEW PART !
0353-19-75 - Universal Rail Mount 2
0353-19-76 - SSD Rail Mount 8 QTY Change !+3
0353-19-77 - FPC Holder 24 QTY Change !+1
0353-19-78 - FPC Holder, short 2
0353-19-79 - Bracket for 0353-00-03/0353-00-25 1
0353-19-791 - PCB support panel 1 NEW PART !
0353-19-80 - Rail Support, Top 1
0353-19-81 - Tube Body, Bottom 1
0353-19-82 - Tube Lock 1
0353-19-83 - Ring, Stainless Steel OD=69.5mm ID=64.5mm t=2mm 2
0353-19-84 - Tube Rail, OD=0.25", ID=0.152", l=718mm 4 MAKE in USA
0353-19-841 - Tube Rail, OD=0.25", ID=0.152", l=918mm 4 MAKE in USA
0353-19-85 - Ring 1
0353-19-86 - Hose Connector, Network 1
0353-19-87 - Hose Connector, SATA 1
0353-19-88 - Tube Adapter 2
0353-19-89 - Tube Lock 4
0353-19-90 - IMU Mount, Bottom 1
0353-19-91 - IMU Mount, Top 1
0353-19-92 - Spacer, IMU Mount 2
0353-19-93 - Bracket Fixating 4
0353-60-04 - Aluminum extrusion for the shade fins,top 10 meters
0353-60-05 - Aluminum extrusion for the shade fins,middle 10 meters
0353-12-401 - Shade fins, top/bottom 16
0353-12-402 - Shade fins, middle 8

The Quote is requested for the Quantity needed for 3-5 Units, and 10 Units.

Please, read the Suppliers Terms and Conditions and send the Proposals by e-mail: supplies@elphel.com

Retrieved from "https://wiki.elphel.com/index.php?title=Request_for_Quote&oldid=12835"