Difference between revisions of "Apertus.ElphelVision User Guide"

Latest revision as of 09:26, 24 April 2012

Requirements

• JAVA JRE
• VLC
• (Gstreamer) <- still experimental

Download

Nightly Builds as well as a release history can be downloaded from sourceforge:

http://elphel.svn.sourceforge.net/viewvc/elphel/Apertus/ElphelVision/Java%20App/release/

Setting Permissions and Running

Inside the folder you just downloaded, change the permissions of the ElphelVision.sh to enable execution.

Open a terminal and run

./ElphelVision.sh

Starting ElphelVision

By default we provide startup scripts for Linux, Mac and Windows.

This is basically a file that runs:

java -jar -Xmx256m ElphelVision-dist.jar --debuglevel 3

It is recommended to run ElphelVision from the commandline and not through a GUI to get error messages, debug output, etc.

Startup Parameters

Example:

ElphelVision-dist.jar --debuglevel 3

The following arguments are available:

--help

Displays the list of available startup parameters

--no-camera

This is useful for running the software without a camera. It will disable all network communication. That way the software just pretends do interact with a camera. For demo purposes or if you want to develop GUI elements without needing a camera.

--debuglevel N

Controls the amount of log and error messages you see in the console

Possible values for N:

0 - none

1 - only errors

2 - errors and warnings (default)

3 - everything

Common Problems

Once you run ElphelVision, there are some known problems that may happen. Here you can see their description and their solution.

There is a black screen covering the streaming.

The first one is that you are able to open ElphelVision and connect to the camera, but a black screen shows up and you are not able to see what's being streamed by the camera. You will notice there is a live histogram below and that there are two Java instances (windows) running. You are also able to view a stream coming from the camera using MPlayer or VLC. This is what you might see:

If you look at the terminal, in the first lines of the output there may be something like this:

=====================================================
ElphelVision - Apertus Viewfinder Software
http://www.apertus.org
Version: 0.57
=====================================================

[14:38:47.853] LOG: Looking for default.style
[14:38:47.876] LOG: default.style found - Styles Loaded
[14:38:47.882] LOG: Translucency is supported by current Graphics Environment
[14:38:47.882] WARNING: OpacityControl is not supported by current Graphics Environment
[14:38:47.882] LOG:PERPIXEL_TRANSPARENT is supported by current Graphics Environment

There is a warning there saying that "OpacityControl" is not supported. This basically means the driver for your graphics card doesn't support this function. You can solve this issue updating your drivers. If you can't update your drivers, then you will have to close the second Java instance (window) to remove it from the front of everything else. This will be uncomfortable, however, because this window will show up again whenever you change any of ElphelVision's settings.

You have a live histogram but there is no streaming.

This problem is somewhat similar to the above, except that you cannot see the streaming coming from the camera, even though the live histogram detects any changes in ambient light. You are also sure this is not the black screen mentioned above, it's just the streaming that is not showing up.

By taking a look at the output coming from the terminal you've ran ElphelVision, there should be an error somewhat similar to this:

[08:35:22.930] LOG: Starting VLC Video
[0x9d18f30] live555 demux error: Failed to connect with rtsp://192.168.1.9:554
[0x97551d0] main input error: open of `rtsp://192.168.1.9:554' failed
[0x97551d0] main input error: A entrada não pode ser aberta
[0x97551d0] main input error: O VLC não é capaz de abrir o MRL 'rtsp://192.168.1.9:554'. Verifique o registro de erros para maiores detalhes.

After a while, there should be also this output in your terminal:

[0x8481d70] main input error: ES_OUT_RESET_PCR called
[0x8496870] live555 demux error: no data received in 10s, aborting

This is actually not an ElphelVision's error. You are having general problems with getting the streaming from the camera. The fix to this problem is that you probably have a package missing and these programs (MPlayer, VLC) are not being able to decode the stream properly. Try installing a package called "gecko-mediaplayer". If you have "totem-mozilla", uninstall it because otherwise your system may try to use it instead of gecko. Now the stream should show up.