Difference between revisions of "Yocto tests"

Latest revision as of 14:47, 28 January 2016

About

NOTE: a newer version of the article is available here (poky 2.0)

• Poky revision - DORA (1.5)
• All of the described things happen in Kubuntu 13.04
• Building Linux images for Zynq platform - ARMv7

Required packages

src link:

sudo apt-get install gawk wget git-core diffstat unzip texinfo build-essential chrpath

sudo apt-get install libsdl1.2-dev xterm

sudo apt-get install make xsltproc docbook-utils fop dblatex xmlto

sudo apt-get install autoconf automake libtool libglib2.0-dev

Output targets

Output folder: poky/build/tmp/deploy/images

These names are as they appear in the u-boot configuration header file - actual output files have different names:

• boot.bin+(u-boot.img) - u-boot as the first stage bootloader = Secondary Program Loader tha boots u-boot.img
• devicetree.dtb - device tree with described interfaces, zynq registers, interrupts and drivers
• uImage - kernel, drivers
• uramdisk.image.gz - applications

Copy them on the micro SD card > run boot once in the u-boot command line.

Boot options

a. Unpack the root file system image to RAM at boot time.

Check u-boot config file.

Keep uramdisk.image.gz along with other files on FAT partition.

b. Keep the root file system on EXT2(EXT3,etc.) partition of SD card.

Create uEnv.txt on FAT partition. uEnv.txt:

uenv_boot=fatload mmc 0 0x3F00000 ${kernel_image} && fatload mmc 0 0x3E00000 ${devicetree_image} && bootm 0x3F00000 - 0x3E00000
uenvcmd=run uenv_boot

Devicetree needs to be recompiled with changes in bootargs-line:

for ext2:

root=/dev/mmcblk0p2

for ram:

root=/dev/ram

Setup

• Step 1: Copy into some_script.sh, modify and run:

#Part 1

git clone -b dora git://git.yoctoproject.org/poky.git poky
cd poky; git checkout 50e9ccb2aff7b9f9dca4fda99a6832c60f64de3b

git clone -b dora https://github.com/openembedded/meta-oe.git meta-oe 
#has changed to git clone -b fido https://github.com/openembedded/meta-openembedded?!!!!!!!!)
cd meta-oe; git checkout ee173678383683e972c7d4d6f0ef5790bfa50274; cd ..

git clone -b dora https://github.com/Xilinx/meta-xilinx.git meta-xilinx
cd meta-xilinx; git checkout aa7d677515ab7d45bbd3bdd6c5383f4143147c6d; cd ..

git clone -b master https://github.com/Elphel/meta-ezynq.git meta-ezynq
cd meta-ezynq; git checkout 626e02fc0b9070458baae3e9a0153a2820ec6565; cd ..

git clone -b master https://github.com/Elphel/meta-elphel393.git meta-elphel393
cd meta-elphel393; git checkout fcde04fa6f4f00c7fe593e5f96bf7b40dc50d2b3; cd ..

#Part 2 : init environment and auto-fill Yocto's conf-files

CURRENT_PATH=$(dirname $(readlink -f "$0"))
. ./oe-init-build-env

BBLAYERS_CONF="conf/bblayers.conf"

echo "BBLAYERS = \" \\" >> $BBLAYERS_CONF
echo "  $CURRENT_PATH/meta \\" >> $BBLAYERS_CONF
echo "  $CURRENT_PATH/meta-yocto \\" >> $BBLAYERS_CONF
echo "  $CURRENT_PATH/meta-yocto-bsp \\" >> $BBLAYERS_CONF
echo "  $CURRENT_PATH/meta-elphel393 \\" >> $BBLAYERS_CONF
echo "  $CURRENT_PATH/meta-ezynq \\" >> $BBLAYERS_CONF
echo "  $CURRENT_PATH/meta-oe/meta-oe \\" >> $BBLAYERS_CONF
echo "  $CURRENT_PATH/meta-oe/meta-webserver \\" >> $BBLAYERS_CONF
echo "  $CURRENT_PATH/meta-oe/meta-networking \\" >> $BBLAYERS_CONF
echo "  $CURRENT_PATH/meta-xilinx \\" >> $BBLAYERS_CONF
echo "  \"" >> $BBLAYERS_CONF

LOCAL_CONF="conf/local.conf"

# number of parallel tasks (including compiles)
echo "BB_NUMBER_THREADS ?= \"8\"" >> $LOCAL_CONF
# number of parallel compiles
echo "PARALLEL_MAKE ?= \"-j 8\"" >> $LOCAL_CONF
# change the MACHINE
echo "MACHINE ?= \"elphel393\"" >> $LOCAL_CONF
# Elphel's MIRROR website, \n is important
echo "MIRRORS =+ \"http://.*/.*     http://mirror.elphel.com/elphel393_mirror/ \n \"" >> $LOCAL_CONF

cd poky
. ./oe-init-build-env

bitbake u-boot-ezynq linux-xlnx core-image-elphel393

Notes

• Currently having 4 MACHINES: elphel393, microzed, zc706 and zedboard

Build bootloader

bitbake u-boot-ezynq
or
bitbake u-boot
or
bitbake virtual/bootloader

Output

• poky/build/tmp/deploy/images/boot.bin
• poky/build/tmp/deploy/images/u-boot.img

Notes

Build kernel

bitbake linux-xlnx
or
bitbake virtual/kernel

Output

• poky/build/tmp/deploy/images/uImage (kernel)
• poky/build/tmp/deploy/images/devicetree.dtb (or some *.dtb)

Notes

• Sources are cloned to:

poky/build/tmp/work/MACHINE-poky-linux-gnueabi/linux-xlnx/.../linux

• If you change files like debug drivers for example, when done editing run:

bitbake linux-xlnx -c compile
bitbake linux-xlnx -c deploy

Build ramdisk.image.gz

bitbake core-image-elphel393

Output

• poky/build/tmp/deploy/images/uramdisk.image.gz (the file has *.u-boot extension after it's built)

Notes

IMAGE_FSTYPES = "tar.gz"

core-image-elphel393.bb:
IMAGE_INSTALL = "packagegroup-core-boot python-core ${ROOTFS_PKGMANAGE_BOOTSTRAP} ${CORE_IMAGE_EXTRA_INSTALL}"

core-image-elphel393.bb:
IMAGE_INSTALL = "packagegroup-core-boot ${ROOTFS_PKGMANAGE_BOOTSTRAP} ${CORE_IMAGE_EXTRA_INSTALL}"
IMAGE_INSTALL_append = "python-core"

IMAGE_INSTALL_append = "<mandatory space?>python-core \
                       i2c-tools \
                       mtd-utils \
                       net-tools \
                       openssh \
                       modphp \
                       apache2 \
                       php-cli"

meta-oe/meta-oe/recipes-devtools/php/php.inc:
PACKAGES = "${PN}-dbg ${PN}-cli ${PN}-cgi ${PN}-fpm ${PN}-fpm-apache2 ${PN}-pear ${PN}-dev ${PN}-staticdev ${PN}-doc ${PN}"

U-boot and device tree related notes

• The default UNPACKED ramdisk max size for zynq is 16MB - once it gets bigger you get KERNEL PANIC - the solution is modifying the device tree - then recompile into DTB:

*.dts, add to bootargs parameter ramdisk_size=32768 (takes KB), example:
bootargs = "console=ttyPS0,115200 root=/dev/ram rw ip=192.168.1.10 earlyprintk ramdisk_size=65536";

• The default COMPRESSED ramdisk max size for zynq is 10MB set in u-boot - change according to your needs, example:

zynq_zed.h:
"sdboot=echo Copying Linux from SD to RAM... && " \
               "mmcinfo && " \
               "fatload mmc 0 0x3000000 ${kernel_image} && " \
               "fatload mmc 0 0x2A00000 ${devicetree_image} && " \
               "fatload mmc 0 0x2000000 ${ramdisk_image} && " \
               "bootm 0x3000000 0x2000000 0x2A00000\0" \

So, the max sizes:
compressed ramdisk    = 0x2A00000 - 0x2000000 = 0xA00000 = 10MB
devicetree = 0x3000000 - 0x2A00000 = 0x600000 = 6MB

Build everything all together

bitbake u-boot-ezynq linux-xlnx core-image-elphel393

Build toolchain (not necessary - needed only for building ezynq targets outside poky)

• Step 1: build

bitbake meta-toolchain

• Step 2: install - launch installer from <some-path>/poky/build/tmp/deploy/

Apply a patch from a recipe

• Example file tree (meta-elphel393):

meta-elphel393/
    recipes-kernel/
        linux/
            linux-xlnx_3.8.bb
            linux-xlnx.inc
            linux-xlnx/
                elphel393_defconfig_3.8.cfg
                elphel393.dts
                xilinx_nandps.patch

• Goal: apply a patch to linux-xlnx files
• Step 1:

bitbake linux-xlnx

• Step 2: Go to where the linux-xlnx got cloned - find and edit the target file:

poky/build/tmp/work/elphel393-poky-linux-gnueabi/linux-xlnx/.../linux/

• Step 3: In the mentioned above directory run:

git diff > somefile.patch

• Step 4: Copy the patch file into recipes/kernel/linux/linux-xlnx/.
• Step 5: Edit the recipe, here it's linux-xlnx.inc, add a line like the following:

Apply the patch when building for any MACHINE:

SRC_URI_append += "file://xilinx_nandps.patch"

SRC_URI_append_elphel393 += "file://xilinx_nandps.patch"

• Step 6(?):

bitbake linux-xlnx -c clean -f
bitbake linux-xlnx

Create *.bbappend for an existing package in meta-*

• Define FILESEXTRAPATHS_prepend := "${THISDIR}/files:" for files that come with the bbappend - so the fetcher could find them
• Try to add "_append" & "_prepend" to functions
• If some do_function is incompatible just rewrite it

Switch to dora branch

cd poky; git checkout dora
cd meta-oe; git checkout dora
cd meta-elphel393; git checkout master

Branching in git

git checkout <name>

git checkout -b <new-branch> <existing-branch>

git branch -D <name>

git push origin <name>

git push origin :<name>

Disappeared errors

• • (Is there a better solution for kubuntu 13.04? in kubuntu 12.10 there is no such error - or is it just newer version?) To fix the ERROR="Could not inherit file classes/vala.bbclass" in bitbake copy vala.bbclass from oe-core? or delete the conflicting recipes (2?)?
  • (Is there a better solution for kubuntu 13.04? in kubuntu 12.10 there is no such error - or is it just newer version?) To fix the ERROR="Failed to parse krb5_1.11.3.bb" in bitbake delete the directory meta-oe/meta-oe/recipes-connectivity/krb5

RTC config example in DTS

http://www.denx.de/wiki/DULG/Appendix

Program bitstream from Linux

cat /sys/devices/amba.0/f8007000.ps7-dev-cfg/prog_done

cat test.bit > /dev/xdevcfg

Create and set up an own external mirror in Yocto/OpenEmbedded

SOURCE_MIRROR_URL = "file:///data/sources/"
INHERIT += "own-mirrors" 
BB_GENERATE_MIRROR_TARBALLS = "1"

It didn't store anything in /data/sources/, but in the build/downloads/ instead - tar.gz + tar.gz's made from cloned git repositories.

MIRRORS =+ "http://.*/.*     http://mirror.elphel.com/elphel393_mirror/ \n "

#SOURCE_MIRROR_URL = "file:///data/sources/"
#INHERIT += "own-mirrors" 
#BB_GENERATE_MIRROR_TARBALLS = "1"

For future consideration

from [meta-xilinx] Best kernel recipe to work against

On Wed, Jan 7, 2015 at 5:42 AM, Philip Balister <philip@balister.org> wrote:
> What's the officially supported best kernel to work against in meta-xilinx?
>
> linux-xlnx-3.14
> linux-yocto-3.17

So it does depend on your preference and requirements. There are still
some drivers missing from the mainline kernel, if you need those
drivers/peripherals then you will most likely need to use the
linux-xlnx kernel.

Shortlist of the main peripherals/drivers that are not yet in the
mainline/linux-yocto kernel:
 * USB (however there is now support upstream in 3.19)
 * PL devcfg
 * QSPI flash controller
 * NAND flash controller
(full list here: http://www.wiki.xilinx.com/Linux+Drivers)

Keep in mind though that the linux-xlnx kernels are short lived, so
you will need to continue updating to newer versions if you want
fixes, etc. And the recipes for the linux-xlnx kernels do not reflect
the actual releases of the linux-xlnx kernel particularly well (since
linux-xlnx releases against Vivado versions instead of linux kernel
versions).

For reference, with microblaze mainline/linux-yocto is the best
supported kernel.

Regards,
Nathan

Some links

• http://picozed.org/content/microzed-how-boot-sd-card
• http://zedboard.org/content/cannot-use-sd-card-partition-root-filesystem
• http://architechboards-microzed.readthedocs.org/en/latest/quick.html
• http://architechboards-microzed.readthedocs.org/en/latest/board.html

1. u-boot environment variables: print all:

~: printenv

setenv examples:

~: setenv modeboot "run uenvboot"
~: setenv uenvboot "fatload mmc 0 0x3000000 uEnv.txt && env import -t 0x3000000 $filesize && run uenv_boot"

2. Unpack image into SD card ext2 partition:

sudo tar -xzf core-image-minimal-dev-microzed.tar.gz -C /media/rootfs/