Difference between revisions of "Using gstreamer"

From ElphelWiki
Jump to: navigation, search
(→‎Live RTSP stream)
 
(13 intermediate revisions by the same user not shown)
Line 8: Line 8:
  
 
= Installing GStreamer =
 
= Installing GStreamer =
−
[http://blog.nicolargo.com/ NicoLargo] made [http://blog.nicolargo.com/2010/05/installation-de-tout-les-composants-gstreamer-sous-ubuntu.html a script] to automatically install all the required packages for GStreamer on Ubuntu 10.04. Should work for up to (K)Ubuntu 16.04 as well.
+
* [http://blog.nicolargo.com/ NicoLargo] made [http://blog.nicolargo.com/2010/05/installation-de-tout-les-composants-gstreamer-sous-ubuntu.html a script] to automatically install all the required packages for GStreamer on Ubuntu 10.04. Should work for up to (K)Ubuntu 16.04 as well. Or:
 +
<font size='2'>
 +
sudo apt-get install gstreamer1.0-tools gstreamer1.0-plugins-good gstreamer1.0-plugins-bad gstreamer1.0-plugins-ugly
 +
</font>
  
 
= Tips =
 
= Tips =
Line 16: Line 19:
 
* You won't get 25 fps if autoexposure is on and local brightness not high enough: the camera will automatically lower framerate for keeping clear picture. Either lighten up, or play with image settings (notably, gain).
 
* You won't get 25 fps if autoexposure is on and local brightness not high enough: the camera will automatically lower framerate for keeping clear picture. Either lighten up, or play with image settings (notably, gain).
  
 +
== GStreamer plugins ==
 +
* All of the plugins are listed [https://gstreamer.freedesktop.org/documentation/plugins.html here].
 +
* Alternative way of learning a plugin's parameters is:
 +
** version 1.0
 +
<font size='2'>
 +
gst-inspect-1.0 <name>
 +
</font>
 +
** version 0.10
 +
<font size='2'>
 +
gst-inspect-0.1 <name>
 +
</font>
  
 
= Command line examples =
 
= Command line examples =
Line 77: Line 91:
 
* careful with streams at higher resolution than 1920x1088
 
* careful with streams at higher resolution than 1920x1088
 
* 10353 - works
 
* 10353 - works
−
* <b>10393 - doesn't have a streamer yet</b>
+
* <b>10393 - works</b>
 
=====native resolution=====
 
=====native resolution=====
 
<font size='2'>
 
<font size='2'>
Line 129: Line 143:
 
     queue ! theoraenc bitrate=4000 ! queue ! oggmux ! filesink location=/tmp/test1024.ogg
 
     queue ! theoraenc bitrate=4000 ! queue ! oggmux ! filesink location=/tmp/test1024.ogg
 
</font>
 
</font>
−
I did some benchmarks; a Core 2 Quad Q6600 (2.4 Ghz) is not powerful enough for h264 encoding @fullHD resolution (using 4 treads).
+
Notes:
 +
* I did some benchmarks; a Core 2 Quad Q6600 (2.4 Ghz) is not powerful enough for h264 encoding @fullHD resolution (using 4 treads).
 +
 
 +
=Useful links=
 +
* [http://wiki.oz9aec.net/index.php/Gstreamer_cheat_sheet GStreamer cheat sheet]
 +
* [http://processors.wiki.ti.com/index.php/Example_GStreamer_Pipelines Example GStreamer pipelines]
 +
* [https://coaxion.net/blog/2014/01/gstreamer-dynamic-pipelines/ GStreamer dynamic pipelines]
 +
* [https://gstreamer.freedesktop.org/data/doc/gstreamer/head/manual/html/section-dynamic-pipelines.html Dynamic pipelines]
 +
 
 +
=Some other examples=
 +
* Simply playing stream
 +
gst-launch-1.0 -v playbin uri=rtsp://192.168.0.9:554 uridecodebin0::source::latency=0
 +
* Receive rtsp stream and re-stream as rtp:
 +
gst-launch-1.0 -e rtspsrc location='rtsp://192.168.0.9:554' latency=0 ! udpsink host=127.0.0.1 port=5000
 +
* Receive rtsp stream then re-stream as rtp and display at the same time
 +
gst-launch-1.0 -e rtspsrc location='rtsp://192.168.0.37:554' latency=0 ! rtpjpegdepay ! jpegdec ! timeoverlay ! tee name=t ! queue ! xvimagesink t. ! jpegenc ! rtpjpegpay ! udpsink host=127.0.0.1 port=5000
 +
To play that rtp with vlc one would need an sdp file (somefile.sdp):
 +
v=0
 +
m=video 5000 RTP/AVP 26
 +
c=IN IP4 127.0.0.1
 +
a=rtpmap:26 JPEG/90000
 +
 
 +
To play with vlc:
 +
vlc somefile.sdp --network-caching=0
 +
To play with gstreamer (sdp is not required):
 +
gst-launch-1.0 udpsrc uri=udp://127.0.0.1:5000 ! rtpjpegdepay ! jpegdec ! autovideosink
 +
 
 +
=Latency tests=
 +
==Test 1: vlc relative to gstreamer==
 +
* Camera:
 +
<font size=2>elphel393~# /usr/bin/str</font>
 +
* PC, console 1 - restream and display at the same time:
 +
<font size=2>~$ gst-launch-1.0 -e rtspsrc location='rtsp://192.168.0.9:554' latency=0 ! rtpjpegdepay ! jpegdec ! timeoverlay ! tee name=t ! queue ! xvimagesink t. ! jpegenc ! rtpjpegpay ! udpsink host=127.0.0.1 port=5000</font>
 +
* PC, console 2 - run vlc:
 +
<font size=2>~$ vlc test.sdp --network-caching=0</font>
 +
where ''test.sdp'':
 +
<font size=2>v=0
 +
m=video 5000 RTP/AVP 26
 +
c=IN IP4 127.0.0.1
 +
a=rtpmap:26 JPEG/90000</font>
  
 
[[Category:393]]
 
[[Category:393]]
 
[[Category:353]]
 
[[Category:353]]

Latest revision as of 10:33, 13 March 2019

GStreamer is a modular node based player as well as encoder in a single application. It is possible to create chains of so called elements with a wide range of different plugins.

GStreamer

GStreamer is a library for constructing graphs of media-handling components. The applications it supports range from simple Ogg/Vorbis playback, audio/video streaming to complex audio (mixing) and video (non-linear editing) processing.

Applications can take advantage of advances in codec and filter technology transparently. Developers can add new codecs and filters by writing a simple plugin with a clean, generic interface.

Installing GStreamer

  • NicoLargo made a script to automatically install all the required packages for GStreamer on Ubuntu 10.04. Should work for up to (K)Ubuntu 16.04 as well. Or:

sudo apt-get install gstreamer1.0-tools gstreamer1.0-plugins-good gstreamer1.0-plugins-bad gstreamer1.0-plugins-ugly

Tips

How to get 25 FPS ?

Depends on the sensor and the exposure:

  • In the sensor's datasheet find resolutions that allow the required FPS.
  • You won't get 25 fps if autoexposure is on and local brightness not high enough: the camera will automatically lower framerate for keeping clear picture. Either lighten up, or play with image settings (notably, gain).

GStreamer plugins

  • All of the plugins are listed here.
  • Alternative way of learning a plugin's parameters is:
    • version 1.0

gst-inspect-1.0 <name>

    • version 0.10

gst-inspect-0.1 <name>

Command line examples

Note: replace width and height accordingly to your camera setup and your computer's horsepower :P)

GStreamer 1.0 (10393 & 10353)

Display

Multipart JPEG (mjpeg), 1 channel

gst-launch-1.0 souphttpsrc is-live=true location=http://192.168.0.8:2323/mimg ! jpegdec ! xvimagesink

Notes:

  • 10393 ports are 2323-2326
  • 10353 port is 8081

Multipart JPEGs (mjpeg), 4 channels in 1 window

  • Each source is resized to 640x480
  • Text overlay and borders added

display4in1.sh: 

#!/bin/sh
LOC1="http://192.168.0.8:2323/mimg"
LOC2="http://192.168.0.8:2324/mimg"
LOC3="http://192.168.0.8:2325/mimg"
LOC4="http://192.168.0.8:2326/mimg"

LABEL1="CHN1"
LABEL2="CHN2"
LABEL3="CHN3"
LABEL4="CHN4"

#souphttpsrc
SOUP="souphttpsrc is-live=true"
#image parameters
PI="image/jpeg,width=1,height=1,framerate=1000/1,pixel-aspect-ratio=1/1"
#video parameters
PV="videoscale ! video/x-raw,width=640,height=480"
#videobox parameters
PVB="videobox fill=Black top=-4 bottom=-2 left=-4 right=-2 border-alpha=0.5"
#textoverlay parameters
PTO="textoverlay font-desc=\"Sans 24\" shaded-background=true valignment=top halignment=left"

gst-launch-1.0 -ve videomixer name=mix \
    sink_0::alpha=1 sink_0::xpos=0   sink_0::ypos=0 \
    sink_1::alpha=1 sink_1::xpos=646 sink_1::ypos=0 \
    sink_2::alpha=1 sink_2::xpos=0   sink_2::ypos=486 \
    sink_3::alpha=1 sink_3::xpos=646 sink_3::ypos=486 \
    ! \
    xvimagesink sync=false \
    $SOUP location=$LOC1 ! $PI ! jpegdec ! $PV ! $PVB ! $PTO text=$LABEL1 ! mix. \
    $SOUP location=$LOC2 ! $PI ! jpegdec ! $PV ! $PVB ! $PTO text=$LABEL2 ! mix. \
    $SOUP location=$LOC3 ! $PI ! jpegdec ! $PV ! $PVB ! $PTO text=$LABEL3 ! mix. \
    $SOUP location=$LOC4 ! $PI ! jpegdec ! $PV ! $PVB ! $PTO text=$LABEL4 ! mix.

Live RTSP stream

Notes:

  • careful with streams at higher resolution than 1920x1088
  • 10353 - works
  • 10393 - works
native resolution

gst-launch-1.0 rtspsrc location=rtsp://192.168.0.9:554 ! rtpjpegdepay ! jpegdec ! xvimagesink sync=false

resized, 640x480

gst-launch-1.0 rtspsrc location=rtsp://192.168.0.9:554 ! rtpjpegdepay ! jpegdec ! videoscale ! video/x-raw,width=640,height=480 ! xvimagesink sync=false

GStreamer 0.10 (10353)

Display

Notes:

  • Careful with streams at higher resolution than 1920x1088

Live RTSP stream

native resolution

gst-launch-0.10 rtspsrc location=rtsp://192.168.0.9:554 ! rtpjpegdepay ! jpegdec ! queue ! ffmpegcolorspace ! xvimagesink sync=false

resized, fit in window

gst-launch-0.10 rtspsrc location=rtsp://192.168.0.9:554 ! rtpjpegdepay ! jpegdec ! queue ! ffmpegcolorspace ! videoscale ! xvimagesink sync=false

Dumping

mjpeg dumping

gst-launch -v rtspsrc location=rtsp://192.168.0.9:554 ! queue ! rtpjpegdepay ! \
    videorate ! capsfilter caps = "image/jpeg, framerate=(fraction)25/1, width=1024, height=768" ! \
    queue ! matroskamux ! filesink location=/tmp/test.mkv

YUV Dumping

gst-launch -v rtspsrc location=rtsp://192.168.0.9:554 ! queue ! rtpjpegdepay ! queue ! jpegdec ! queue ! \
    videorate ! capsfilter caps="video/x-raw-yuv, format=(fourcc)I420, width=(int)1024, height=(int)768, framerate (fraction)25/1" ! \
    queue ! avimux ! filesink location=/tmp/test.avi

Dump transcoding example

gst-launch filesrc location=test.mkv ! matroskademux ! queue ! jpegdec ! queue ! theoraenc bitrate=4000 ! queue ! oggmux ! filesink location=test.ogg

Live encoding

gst-launch -v rtspsrc location=rtsp://192.168.0.9:554 ! queue ! rtpjpegdepay ! queue ! jpegdec ! queue ! \
    videorate ! capsfilter caps="video/x-raw-yuv, format=(fourcc)I420, width=(int)1024, height=(int)768, framerate=(fraction)25/1" ! \
    queue ! theoraenc bitrate=4000 ! queue ! oggmux ! filesink location=/tmp/test1024.ogg

Notes:

  • I did some benchmarks; a Core 2 Quad Q6600 (2.4 Ghz) is not powerful enough for h264 encoding @fullHD resolution (using 4 treads).

Useful links

Some other examples

  • Simply playing stream
gst-launch-1.0 -v playbin uri=rtsp://192.168.0.9:554 uridecodebin0::source::latency=0
  • Receive rtsp stream and re-stream as rtp:
gst-launch-1.0 -e rtspsrc location='rtsp://192.168.0.9:554' latency=0 ! udpsink host=127.0.0.1 port=5000
  • Receive rtsp stream then re-stream as rtp and display at the same time
gst-launch-1.0 -e rtspsrc location='rtsp://192.168.0.37:554' latency=0 ! rtpjpegdepay ! jpegdec ! timeoverlay ! tee name=t ! queue ! xvimagesink t. ! jpegenc ! rtpjpegpay ! udpsink host=127.0.0.1 port=5000

To play that rtp with vlc one would need an sdp file (somefile.sdp): 

v=0
m=video 5000 RTP/AVP 26
c=IN IP4 127.0.0.1
a=rtpmap:26 JPEG/90000

To play with vlc: 

vlc somefile.sdp --network-caching=0

To play with gstreamer (sdp is not required): 

gst-launch-1.0 udpsrc uri=udp://127.0.0.1:5000 ! rtpjpegdepay ! jpegdec ! autovideosink

Latency tests

Test 1: vlc relative to gstreamer

  • Camera:
elphel393~# /usr/bin/str
  • PC, console 1 - restream and display at the same time:
~$ gst-launch-1.0 -e rtspsrc location='rtsp://192.168.0.9:554' latency=0 ! rtpjpegdepay ! jpegdec ! timeoverlay ! tee name=t ! queue ! xvimagesink t. ! jpegenc ! rtpjpegpay ! udpsink host=127.0.0.1 port=5000
  • PC, console 2 - run vlc:
~$ vlc test.sdp --network-caching=0

where test.sdp: 

v=0
m=video 5000 RTP/AVP 26
c=IN IP4 127.0.0.1
a=rtpmap:26 JPEG/90000
Retrieved from "https://wiki.elphel.com/index.php?title=Using_gstreamer&oldid=16616"