Difference between revisions of "Elphel camera parts 0393-27"

Latest revision as of 09:39, 28 May 2020

All parts on this page were prepared for 3D printing. Some of them have support elements manually place in most critical parts, so you do not need to enable support elements in your slicer software. All those elements can be easily removed after printing. We used Ultimaker2 with 0.4 mm nozzle for 3D printing all of these parts and achieved good results with 0.7 mm wall thickness and 20% infill density. We posted some examples of 3D printed parts on our blog

One of the parts below, 0393-27-07, is a helper object. It was specifically created for cutting out of SFE mount place in custom designs.

1 0393-27-01f - C/CS SFE adapter
2 0393-27-02d - Adapter for camera body
3 0393-27-03c - Support frame adapter
4 0393-27-04 - Cable strain relief for 0393-27-02d, 0393-27-2e
5 0393-27-05 - Cable strain relief for 0393-27-01f
6 0393-27-06 - Cable strain relief for 0393-27-03c
7 0393-27-07 - SFE cutout part
8 0393-27-08a - SFE adapter
9 0393-27-09 - SFE adapter
10 0393-27-10 - Cable strain relief for 0393-27-03c or 0393-27-02d
11 0393-27-12 - SFE support platform for press fit kit
12 0393-27-13 - Tube cap
13 0393-27-14 - Mount band
14 0393-27-15 - IMU support plate
15 0393-27-16 - Calibrated SFE housing
16 0393-27-17 - Cable strain relief for calibration SFE housing
17 0393-27-18 - Support frame adapter, short
18 0393-27-19 - IMU+GPS support plate
19 0393-27-20 - IMU+GPS enclosure
20 0393-27-21 - Back panel extender for SSD rack
21 0393-27-30 - Respirator Port, Part A
22 0393-27-31 - Respirator Port, Part B
23 0393-27-32 - Fixture
24 0393-27-33 - UV Filter Intake Port
25 0393-27-34 - UV Lamp Support
26 0393-27-35 - UV Filter Body

0393-27-01f - C/CS SFE adapter


3d (stl) 3d (step) 2d (dxf) 2d (pdf)

0393-27-02d - Adapter for camera body


3d (stl) 3d (step) 2d (dxf) 2d (pdf)

0393-27-03c - Support frame adapter


3d (stl) 3d (step) 2d (dxf) 2d (pdf)

0393-27-04 - Cable strain relief for 0393-27-02d, 0393-27-2e


3d (stl) 3d (step) 2d (dxf) 2d (pdf)

0393-27-05 - Cable strain relief for 0393-27-01f


3d (stl) 3d (step) 2d (dxf) 2d (pdf)

0393-27-06 - Cable strain relief for 0393-27-03c


3d (stl) 3d (step) 2d (dxf) 2d (pdf)

0393-27-07 - SFE cutout part


3d (stl) 3d (step) 2d (dxf) 2d (pdf)

0393-27-08a - SFE adapter


3d (stl) 3d (step) 2d (dxf) 2d (pdf)

0393-27-09 - SFE adapter


3d (stl) 3d (step) 2d (dxf) 2d (pdf)

0393-27-10 - Cable strain relief for 0393-27-03c or 0393-27-02d


3d (stl) 3d (step) 2d (dxf) 2d (pdf)

0393-27-12 - SFE support platform for press fit kit

This platform facilitates disk springs support pins installation into SFEs.


3d (stl) 3d (step) 2d (dxf) 2d (pdf)

0393-27-13 - Tube cap


3d (stl) 3d (step) 2d (dxf) 2d (pdf)

0393-27-14 - Mount band

This band is used to mount additional parts on top of NC393 camera. One of the possible parts is 0393-27-15 for IMU mount.


3d (stl) 3d (step) 2d (dxf) 2d (pdf)

0393-27-15 - IMU support plate

This plate is used in combination with 0393-27-14.


3d (stl) 3d (step) 2d (dxf) 2d (pdf)

0393-27-16 - Calibrated SFE housing


3d (stl) 3d (step) 2d (dxf) 2d (pdf)

0393-27-17 - Cable strain relief for calibration SFE housing

Used with 0393-27-16.


3d (stl) 3d (step) 2d (dxf) 2d (pdf)

0393-27-18 - Support frame adapter, short


3d (stl) 3d (step) 2d (dxf) 2d (pdf)

0393-27-19 - IMU+GPS support plate


3d (stl) 3d (step) 2d (dxf) 2d (pdf)

0393-27-20 - IMU+GPS enclosure


3d (stl) 3d (step) 2d (dxf) 2d (pdf)

0393-27-21 - Back panel extender for SSD rack


3d (stl) 3d (step) 2d (dxf) 2d (pdf)

0393-27-30 - Respirator Port, Part A

Glued to part B with epoxy and 1.5mm carbon fiber rod using 0393-27-32 as support


3d (stl) 3d (step) 2d (dxf) 2d (pdf)

0393-27-31 - Respirator Port, Part B

Glued to part A with epoxy and 1.5mm carbon fiber rod using 0393-27-32 as support


3d (stl) 3d (step) 2d (dxf) 2d (pdf)

0393-27-32 - Fixture

Used to glue 0393-27-31 to 0393-27-30


3d (stl) 3d (step) 2d (dxf) 2d (pdf)

0393-27-33 - UV Filter Intake Port


3d (stl) 3d (step) 2d (dxf) 2d (pdf)

0393-27-34 - UV Lamp Support

Attached to the lamp enclosure with 1/16" foam tape with double-sided adhesive


3d (stl) 3d (step) 2d (dxf) 2d (pdf)

0393-27-35 - UV Filter Body


3d (stl) 3d (step) 2d (dxf) 2d (pdf)

@@ Line 14: / Line 14: @@
 {{Cad4c|0393-27-03c}}
 ----
-=== 0393-27-04 - Cable strain relief for 0393-27-03c ===
+=== 0393-27-04 - Cable strain relief for 0393-27-02d, 0393-27-2e ===
 {{Cad4c|0393-27-04}}
 ----
 === 0393-27-05 - Cable strain relief for 0393-27-01f ===
 {{Cad4c|0393-27-05}}
@@ Line 54: / Line 55: @@
 ----
-=== 0393-27-16 - Calibration SFE housing ===
+=== 0393-27-16 - Calibrated SFE housing ===
 {{Cad4c|0393-27-16}}
 ----
@@ Line 61: / Line 62: @@
 Used with 0393-27-16.
 {{Cad4c|0393-27-17}}
+----
+=== 0393-27-18 - Support frame adapter, short ===
+{{Cad4c|0393-27-18}}
+----
+=== 0393-27-19 - IMU+GPS support plate ===
+{{Cad4c|0393-27-19}}
+----
+=== 0393-27-20 - IMU+GPS enclosure ===
+{{Cad4c|0393-27-20}}
+----
+=== 0393-27-21 - Back panel extender for SSD rack ===
+{{Cad4c|0393-27-21}}
+----
+=== 0393-27-30 - Respirator Port, Part A ===
+Glued to part B with epoxy and 1.5mm carbon fiber rod using 0393-27-32 as support
+{{Cad4c|0393-27-30}}
+----
+=== 0393-27-31 - Respirator Port, Part B ===
+Glued to part A with epoxy and 1.5mm carbon fiber rod using 0393-27-32 as support
+{{Cad4c|0393-27-31}}
+----
+=== 0393-27-32 - Fixture ===
+Used to glue 0393-27-31 to 0393-27-30
+{{Cad4c|0393-27-32}}
+----
+=== 0393-27-33 - UV Filter Intake Port ===
+{{Cad4c|0393-27-33}}
+----
+=== 0393-27-34 - UV Lamp Support ===
+Attached to the lamp enclosure with 1/16" foam tape with double-sided adhesive
+{{Cad4c|0393-27-34}}
+----
+=== 0393-27-35 - UV Filter Body  ===
+{{Cad4c|0393-27-35}}
 ----