Difference between revisions of "103891"
(Added A-D description) |
|||
| (9 intermediate revisions by 2 users not shown) | |||
| Line 9: | Line 9: | ||
* Mechanical drawings and CAD files for the 103891 board: [[Elphel_camera_parts_0393-00#0393-00-23A_-_103891_rev_A_external_synchronization_and_fan_PCB_assembly|link]] | * Mechanical drawings and CAD files for the 103891 board: [[Elphel_camera_parts_0393-00#0393-00-23A_-_103891_rev_A_external_synchronization_and_fan_PCB_assembly|link]] | ||
| + | {{Cad4a|0393-00-23A}} | ||
==Links== | ==Links== | ||
| + | * [[10389|10389 board]]: interface board | ||
| + | * [[Trigger_393]]: triggering NC393 camera | ||
| + | * J2 connector: [http://www.digikey.com/product-detail/en/cui-inc/SJ1-42534-SMT-TR/CP1-42534SJTR-ND/659908 SJ1-42534-SMT-TR] ([http://www.cui.com/product/resource/sj1-4253x-smt-series.pdf datasheet]) | ||
| + | * Sync cable example: [http://www.digikey.com/product-detail/en/tensility-international-corp/10-00331/839-1029-ND/2350237 839-1029-ND] | ||
| + | |||
| + | Connector provides high-current (up to 0.5A) dc-coupled 5V output and optoisolated I/O. When optoisolated pair is used used as an input (common use), external signal is applied between XSYNC1 (+) and XSYNC2(-). When the pair is used as an output (less common), external 5V power source should be connected in series with the receiver and 103891, so that "+" will be applied to XSYNC2, and "-" - to XSYNC1 (opposite to the input mode). Details are available in the circuit diagram of the [[10389]] board. | ||
| + | |||
| + | Output synchronization can be just a pulse or carry additional timestamp data when used to synchronize multiple NC393 cameras. See [[Trigger_393]] for the settings. Pin A is the tip, B - next, then C and D is the closest to the connector housing. | ||
| + | {| class='wikitable' | ||
| + | |+Connector pinout | ||
| + | |Name | ||
| + | |Pin | ||
| + | |Cable wire color | ||
| + | |Description | ||
| + | |- | ||
| + | |XSYNC1 | ||
| + | |1 (D) | ||
| + | |black | ||
| + | |optoisolated, "+" input with respect to XSYNC2 | ||
| + | |- | ||
| + | |SYNC_DRV | ||
| + | |2 (A) | ||
| + | |red | ||
| + | |Sync output (DC-coupled), +5V pulses with respect to GND | ||
| + | |- | ||
| + | |GND | ||
| + | |3 (B) | ||
| + | |white | ||
| + | |Output reference, connected to the camera system ground | ||
| + | |- | ||
| + | |XSYNC2 | ||
| + | |4 (C) | ||
| + | |green | ||
| + | |optoisolated, "-" input with respect to XSYNC1 | ||
| + | |} | ||
| + | * [[Trigger_393#Internal_periodic_trigger_.284_fps.2C_from_fpga_generator.29_.2B_output_the_signal_to_external_port|How to output trigger signal to external port]] | ||
* [[Media:103891a.pdf|103891 Rev "A" Circuit Diagram, Parts List, PCB layout]] | * [[Media:103891a.pdf|103891 Rev "A" Circuit Diagram, Parts List, PCB layout]] | ||
* [[Media:103891a gerber.tar.gz|103891 Rev "A" Gerber files]] | * [[Media:103891a gerber.tar.gz|103891 Rev "A" Gerber files]] | ||
| + | |||
| + | [[Category:Boards 393]] | ||
Latest revision as of 12:02, 9 July 2023
103891 adapter board routes external sync I/O from the 10389 interface board to the back panel 2.5mm barrel connector and provide 4-pic connector socket for 3.3V/5.0V fan. It is used in Elphel 393 series cameras
Mechanical properties
- Dimensions: 58 x 38 x 9 mm (all connectors installed)
- Weight: 3.0 g
- Mechanical drawings and CAD files for the 103891 board: link
|
Copyright © 2024 Elphel Inc., Licensed under [1], GNU FDL v.1.3 | ||
Links
- 10389 board: interface board
- Trigger_393: triggering NC393 camera
- J2 connector: SJ1-42534-SMT-TR (datasheet)
- Sync cable example: 839-1029-ND
Connector provides high-current (up to 0.5A) dc-coupled 5V output and optoisolated I/O. When optoisolated pair is used used as an input (common use), external signal is applied between XSYNC1 (+) and XSYNC2(-). When the pair is used as an output (less common), external 5V power source should be connected in series with the receiver and 103891, so that "+" will be applied to XSYNC2, and "-" - to XSYNC1 (opposite to the input mode). Details are available in the circuit diagram of the 10389 board.
Output synchronization can be just a pulse or carry additional timestamp data when used to synchronize multiple NC393 cameras. See Trigger_393 for the settings. Pin A is the tip, B - next, then C and D is the closest to the connector housing.
| Name | Pin | Cable wire color | Description |
| XSYNC1 | 1 (D) | black | optoisolated, "+" input with respect to XSYNC2 |
| SYNC_DRV | 2 (A) | red | Sync output (DC-coupled), +5V pulses with respect to GND |
| GND | 3 (B) | white | Output reference, connected to the camera system ground |
| XSYNC2 | 4 (C) | green | optoisolated, "-" input with respect to XSYNC1 |
