Difference between revisions of "Eyesis4Pi 393 User Guide - Firmware Update"
From ElphelWiki
(→Update) |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
==Update== | ==Update== | ||
| − | 1. Boot from micro SD | + | 1. Boot from micro SD |
| + | Connect all cams USBs to PC | ||
| + | Follow these [[Boot_options_393#Regular_micro_SD_card|instructions]] to boot. | ||
2. http://192.168.0.161/update_software.html | 2. http://192.168.0.161/update_software.html | ||
Latest revision as of 09:57, 28 April 2017
Update
1. Boot from micro SD
Connect all cams USBs to PC Follow these instructions to boot.
2. http://192.168.0.161/update_software.html
upload rootfs.ubi and uImage only, flash
3. mount
ssh root@192.168.0.161 ubiattach /dev/ubi_ctrl -m 4 mount -t ubifs /dev/ubi0_0 /mnt/ubi
4. edit
nano /mnt/ubi/etc/init.d/init_elphel393 #set \"eyesis\":1 CTRL-X CTRL-Y, ENTER sync
5. if there's a need, update ip in /etc/elphel393/init_elphel393.py
6. unmount
umount /mnt/ubi
7. repeat 2.-6. for 162 & 163
