Difference between revisions of "Development for 10393"

From ElphelWiki
Jump to: navigation, search
(→‎after building)
 
(14 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
===Setup environment===
 
===Setup environment===
−
[[Poky_2.0_manual#Setup]]
+
Get sources and build default images: [[Poky_2.0_manual#Setup|Instructions]]
 +
 
 +
====top project====
 +
* [https://git.elphel.com/Elphel/elphel393.git elphel393.git]
 +
 
 +
{| class='wikitable'
 +
!file
 +
!description
 +
|-
 +
| '''projects-default.json'''
 +
|
 +
* list of cloned repositories and tree structure
 +
* copy of this file makes a working copy - '''projects.json'''
 +
|-
 +
| '''setup.py'''
 +
|
 +
* creates a working copy from default and parses the contents
 +
* rerun to update all repositories - then rebuild using bitbake
 +
* generates a default ''local.conf'' for poky pre-configured for 10393
 +
|-
 +
| '''check_versions.py'''
 +
| local repository vs running on target hardware version checker
 +
|}
 +
 
 
===Flash vs micro SD===
 
===Flash vs micro SD===
 
* micro SD cards work best for development
 
* micro SD cards work best for development
Line 8: Line 31:
 
* flash works best for a production system:
 
* flash works best for a production system:
 
** non-replaceable
 
** non-replaceable
−
** limited write cycles
+
** provisions are made to limit write cycles and to prevent inadvertent file system changes
−
** because of overlayfs changes need an extra sync (overlay_sync) and a proper reboot to get written to the flash.
+
** overlayfs file system merges nonvolatile (flash) and volatile (ram disk) file systems, power-cycling discards all file modifications made during the last session
 +
** an extra sync command (overlay_sync) and a proper reboot is required to commit file system changes to the system flash memory (see overlay_syn usage example [[10393_manual#Change_default_ip_address]]).
 +
 
 +
===Environment tree===
 +
<font size='2'>
 +
'''elphel393'''
 +
├── '''bootable-images -> poky/build/tmp/deploy/images/elphel393/''' - poky generated boot images
 +
├── '''fpga-elphel''' - fpga projects, matching recipes are in ''meta/meta-elphel393/recipes-core/''
 +
│   ├── '''x359'''
 +
│   ├── '''x393'''
 +
│   └── '''x393_sata'''
 +
├── '''linux-elphel''' - kernel - a kernel tree with Elphel's sources only - it is merged with the full kernel tree
 +
├── '''meta''' - extra recipe layers for poky
 +
│   ├── '''meta-elphel393''' - Elphel's recipes: fpga, device tree, kernel and applications, lots of bbappends
 +
│   ├── '''meta-ezynq''' - Elphel's recipes for u-boot
 +
│   ├── '''meta-openembedded''' - recipes (like PHP) that were not included in poky 2.0
 +
│   ├── '''meta-swupdate''' - swupdate recipes (not yet used)
 +
│   └── '''meta-xilinx''' - Xilinx's recipes, help to build kernel and device tree
 +
├── '''poky''' - poky tree
 +
│   ├── '''build'''
 +
│   │   └── '''conf'''
 +
│   │      ├── '''bblayers.conf''' - paths to extra layers (generated by setup.py)
 +
│   │      └── <font color='red'>'''local.conf'''</font> - have a look inside, local configuration (generated by setup.py)
 +
│   └── '''meta''' - poky's recipes
 +
├── '''rootfs-elphel''' - user applicatons projects and init scripts, matching recipes are found in ''meta/meta-elphel393/recipes-core/''
 +
│   ├── '''elphel-apps-autocampars''' - camera parameters manager - setup, store/restore, set default
 +
│   ├── '''elphel-apps-autoexposure''' - autoexposure daemon
 +
│   ├── '''elphel-apps-camogm''' - recorder program
 +
│   ├── '''elphel-apps-editconf'''
 +
│   ├── '''elphel-apps-gps''' - gps receiver application
 +
│   ├── '''elphel-apps-histograms''' - histograms
 +
│   ├── '''elphel-apps-imgsrv''' - image server
 +
│   ├── '''elphel-apps-php-extension''' - php functions, compiled as a php extension (part of php recipe)
 +
│   ├── '''elphel-apps-tempmon''' - temperature monitor
 +
│   ├── '''elphel-init''' - system init script
 +
│   ├── '''elphel-udev-rules''' - udev rules: drive automount
 +
│   ├── '''elphel-web-393''' - web GUIs
 +
│   ├── '''elphel-web-camvc''' - main control GUI, ported from 353
 +
│   └── '''elphel-web-hwmon''' - hardware monitor
 +
└── '''tools'''
 +
    └── '''elphel-tools-update''' - useful scripts, e.g. create bootable mmc
 +
 
 +
===Change repository address, branch, hash===
 +
* change uri: edit ''elphel393/projects.json''
 +
* change hash: edit ''elphel393/projects.json'':
 +
"elphel-apps-camogm":[
 +
  "https://git.elphel.com/Elphel/elphel-apps-camogm.git",
 +
  "master","" '''<- leave empty to get the latest, add hash to freeze'''
 +
],
 +
 
 +
* change branch: ''edit elphel393/poky/build/conf/local.conf''
 +
ELPHEL393_branches += "elphel-apps-camogm:framepars"
 +
 
  
 
===Kernel===
 
===Kernel===
 +
====Add new driver====
 +
* examples in ''elphel393/linux-elphel/src''
 +
** add new files to the tree
 +
** do not forget KConfig and Makefiles
 +
** change kernel config in ''elphel393_fixold/meta/meta-elphel393/recipes-kernel/linux/config/elphel393.cfg'' - clean then rebuild the kernel. The cfg file gets copied to the poky's kernel build directory.
  
 
===Applications===
 
===Applications===
 +
====Create new project====
 +
The best reference projects are in ''elphel393/rootfs-elphel/''
 +
* Place project files to ''elphel393/rootfs-elphel/''
 +
* Create a recipe in ''elphel393/meta/meta-elphel393/.../''
 +
* In the recipe set package name - it will go to the rootfs recipe ''elphel393/meta/meta-elphel393/recipes-core/images/'''''core-image-elphel393.bb'''
 +
* bitbake core-image-elphel393
 +
 +
====Project structure====
 +
=====recipe=====
 +
elphel393/meta/meta-elphel393/recipes-core/init/init_1.0.bb
 +
 +
'''Note:''' The recipe and the project sources are in different repos
 +
 +
=====in repository=====
 +
rootfs-elphel/elphel-init/
 +
├── eclipse_project_setup
 +
├── LICENSE
 +
├── Makefile
 +
├── README.md
 +
├── run_bitbake.sh
 +
├── src
 +
│   ├── init_elphel393
 +
│   ├── init_elphel393.py
 +
│   ├── init_elphel393.sh
 +
│   ├── init_eyesis12.sh
 +
│   ├── init_eyesis_bottom2.sh
 +
│   └── Makefile
 +
└── VERSION
 +
 +
=====after building=====
 +
rootfs-elphel/elphel-init/
 +
├── <font color='green'>bitbake-logs -> /.../elphel393/poky/build/tmp/work/cortexa9t2hf-neon-poky-linux-gnueabi/init/1_0-69/temp</font>
 +
├── eclipse_project_setup
 +
├── <font color='green'>image -> /.../elphel393/poky/build/tmp/work/cortexa9t2hf-neon-poky-linux-gnueabi/init/1_0-69/image</font>
 +
├── LICENSE
 +
├── Makefile
 +
├── README.md
 +
├── run_bitbake.sh
 +
├── src
 +
│   ├── init_elphel393
 +
│   ├── init_elphel393.py
 +
│   ├── init_elphel393.sh
 +
│   ├── init_eyesis12.sh
 +
│   ├── init_eyesis_bottom2.sh
 +
│   └── Makefile
 +
├── <font color='green'>sysroots -> /.../elphel393/poky/build/tmp/work/cortexa9t2hf-neon-poky-linux-gnueabi/init/1_0-69/recipe-sysroot</font>
 +
└── VERSION
  
−
===Projects structure===
+
</font>
  
 +
At some point when building from command line the sysroots link will be created. After '''sysroots''' link is there the project can be build from Eclipse IDE
  
 
[[Category:393]]
 
[[Category:393]]

Latest revision as of 11:07, 16 September 2020

Setup environment

Get sources and build default images: Instructions

top project

file description
projects-default.json
  • list of cloned repositories and tree structure
  • copy of this file makes a working copy - projects.json
setup.py
  • creates a working copy from default and parses the contents
  • rerun to update all repositories - then rebuild using bitbake
  • generates a default local.conf for poky pre-configured for 10393
check_versions.py local repository vs running on target hardware version checker

Flash vs micro SD

  • micro SD cards work best for development
    • replaceable
    • changes get written to the card, no extra sync required
  • flash works best for a production system:
    • non-replaceable
    • provisions are made to limit write cycles and to prevent inadvertent file system changes
    • overlayfs file system merges nonvolatile (flash) and volatile (ram disk) file systems, power-cycling discards all file modifications made during the last session
    • an extra sync command (overlay_sync) and a proper reboot is required to commit file system changes to the system flash memory (see overlay_syn usage example 10393_manual#Change_default_ip_address).

Environment tree

elphel393
├── bootable-images -> poky/build/tmp/deploy/images/elphel393/ - poky generated boot images
├── fpga-elphel - fpga projects, matching recipes are in meta/meta-elphel393/recipes-core/
│   ├── x359
│   ├── x393
│   └── x393_sata
├── linux-elphel - kernel - a kernel tree with Elphel's sources only - it is merged with the full kernel tree
├── meta - extra recipe layers for poky
│   ├── meta-elphel393 - Elphel's recipes: fpga, device tree, kernel and applications, lots of bbappends
│   ├── meta-ezynq - Elphel's recipes for u-boot
│   ├── meta-openembedded - recipes (like PHP) that were not included in poky 2.0
│   ├── meta-swupdate - swupdate recipes (not yet used)
│   └── meta-xilinx - Xilinx's recipes, help to build kernel and device tree
├── poky - poky tree
│   ├── build
│   │   └── conf
│   │       ├── bblayers.conf - paths to extra layers (generated by setup.py)
│   │       └── local.conf - have a look inside, local configuration (generated by setup.py)
│   └── meta - poky's recipes
├── rootfs-elphel - user applicatons projects and init scripts, matching recipes are found in meta/meta-elphel393/recipes-core/
│   ├── elphel-apps-autocampars - camera parameters manager - setup, store/restore, set default
│   ├── elphel-apps-autoexposure - autoexposure daemon
│   ├── elphel-apps-camogm - recorder program
│   ├── elphel-apps-editconf 
│   ├── elphel-apps-gps - gps receiver application
│   ├── elphel-apps-histograms - histograms
│   ├── elphel-apps-imgsrv - image server
│   ├── elphel-apps-php-extension - php functions, compiled as a php extension (part of php recipe)
│   ├── elphel-apps-tempmon - temperature monitor
│   ├── elphel-init - system init script
│   ├── elphel-udev-rules - udev rules: drive automount
│   ├── elphel-web-393 - web GUIs
│   ├── elphel-web-camvc - main control GUI, ported from 353
│   └── elphel-web-hwmon - hardware monitor
└── tools
    └── elphel-tools-update - useful scripts, e.g. create bootable mmc

Change repository address, branch, hash

  • change uri: edit elphel393/projects.json
  • change hash: edit elphel393/projects.json:
"elphel-apps-camogm":[
  "https://git.elphel.com/Elphel/elphel-apps-camogm.git",
  "master","" <- leave empty to get the latest, add hash to freeze
],
  • change branch: edit elphel393/poky/build/conf/local.conf
ELPHEL393_branches += "elphel-apps-camogm:framepars"


Kernel

Add new driver

  • examples in elphel393/linux-elphel/src
    • add new files to the tree
    • do not forget KConfig and Makefiles
    • change kernel config in elphel393_fixold/meta/meta-elphel393/recipes-kernel/linux/config/elphel393.cfg - clean then rebuild the kernel. The cfg file gets copied to the poky's kernel build directory.

Applications

Create new project

The best reference projects are in elphel393/rootfs-elphel/

  • Place project files to elphel393/rootfs-elphel/
  • Create a recipe in elphel393/meta/meta-elphel393/.../
  • In the recipe set package name - it will go to the rootfs recipe elphel393/meta/meta-elphel393/recipes-core/images/core-image-elphel393.bb
  • bitbake core-image-elphel393

Project structure

recipe
elphel393/meta/meta-elphel393/recipes-core/init/init_1.0.bb

Note: The recipe and the project sources are in different repos

in repository
rootfs-elphel/elphel-init/
├── eclipse_project_setup
├── LICENSE
├── Makefile
├── README.md
├── run_bitbake.sh
├── src
│   ├── init_elphel393
│   ├── init_elphel393.py
│   ├── init_elphel393.sh
│   ├── init_eyesis12.sh
│   ├── init_eyesis_bottom2.sh
│   └── Makefile
└── VERSION
after building
rootfs-elphel/elphel-init/
├── bitbake-logs -> /.../elphel393/poky/build/tmp/work/cortexa9t2hf-neon-poky-linux-gnueabi/init/1_0-69/temp
├── eclipse_project_setup
├── image -> /.../elphel393/poky/build/tmp/work/cortexa9t2hf-neon-poky-linux-gnueabi/init/1_0-69/image
├── LICENSE
├── Makefile
├── README.md
├── run_bitbake.sh
├── src
│   ├── init_elphel393
│   ├── init_elphel393.py
│   ├── init_elphel393.sh
│   ├── init_eyesis12.sh
│   ├── init_eyesis_bottom2.sh
│   └── Makefile
├── sysroots -> /.../elphel393/poky/build/tmp/work/cortexa9t2hf-neon-poky-linux-gnueabi/init/1_0-69/recipe-sysroot
└── VERSION

At some point when building from command line the sysroots link will be created. After sysroots link is there the project can be build from Eclipse IDE

Retrieved from "https://wiki.elphel.com/index.php?title=Development_for_10393&oldid=17003"