Difference between revisions of "Alternative IO board for 10353/10363 series"
From ElphelWiki
(Initial description) |
|||
| (7 intermediate revisions by 3 users not shown) | |||
| Line 6: | Line 6: | ||
* GPIO opto-isolated or via buffer, pinhead 2mm pitch | * GPIO opto-isolated or via buffer, pinhead 2mm pitch | ||
* USB sound card on board with in-out | * USB sound card on board with in-out | ||
| − | * socket for GPS module. GPS module and serial port | + | * socket for GPS module. GPS module and serial port can not work together |
* 3-axises accelerometers | * 3-axises accelerometers | ||
Comments?? | Comments?? | ||
| + | |||
| + | Dima, you should clearly mark is as a proposal for discussion.I would rather see (compact) lens control circuitry (both variants - 2-wire and EOS-compatible). Other people would suggest aaudio as a standard feature--[[User:Andrey.filippov|Andrey.filippov]] 09:56, 16 July 2007 (CDT) | ||
| + | |||
| + | For 2-wire need 12V power supply. | ||
| + | Power requrements: | ||
| + | * 5V for USB 0.3A per port (max load) | ||
| + | * 12V 0.3A for 2-wire lens control board 10331 | ||
| + | --[[User:Dimon|dimon]] 18:41, 16 July 2007 (CDT) | ||
| + | |||
| + | Connectors 2mm pitch: | ||
| + | * 2 USB internal ports - 8 pin | ||
| + | * RS-232 port - 4 pin | ||
| + | * 10331+EOS port - 10 pin | ||
| + | * 4 input, 4 output - 8 pin | ||
| + | * audio in 3, audio out 3 - 6pin | ||
| + | |||
| + | I make 3D model of this board(Varicad). See here: | ||
| + | [http://www.oshec.org/Members/dimon/rabota/new_IO.dwb 3D model] | ||
| + | |||
| + | --[[User:Dimon|dimon]] 02:18, 25 July 2007 (CDT) | ||
| + | |||
| + | New 3D model of board uploaded. This is model with GPS module and audio connector. See here: | ||
| + | [http://www.oshec.org/Members/dimon/rabota/new_IO_GPS.dwb 3D model + GPS] | ||
| + | |||
| + | What about board? Can I start make design? Or need discuss more? | ||
| + | |||
| + | --[[User:Dimon|dimon]] 21:11, 25 July 2007 (CDT) | ||
Latest revision as of 18:11, 25 July 2007
Description and duscussion about new IO board for 10353/10363 series
* USB ports, 1 external, 2 internal small non-standart connector pinhead 2mm pitch * serial port, pinhead connector 2mm pitch * IDE port for 1.8" hard drives with Flat Flex cable. * GPIO opto-isolated or via buffer, pinhead 2mm pitch * USB sound card on board with in-out * socket for GPS module. GPS module and serial port can not work together * 3-axises accelerometers
Comments??
Dima, you should clearly mark is as a proposal for discussion.I would rather see (compact) lens control circuitry (both variants - 2-wire and EOS-compatible). Other people would suggest aaudio as a standard feature--Andrey.filippov 09:56, 16 July 2007 (CDT)
For 2-wire need 12V power supply. Power requrements:
* 5V for USB 0.3A per port (max load) * 12V 0.3A for 2-wire lens control board 10331
--dimon 18:41, 16 July 2007 (CDT)
Connectors 2mm pitch:
* 2 USB internal ports - 8 pin * RS-232 port - 4 pin * 10331+EOS port - 10 pin * 4 input, 4 output - 8 pin * audio in 3, audio out 3 - 6pin
I make 3D model of this board(Varicad). See here: 3D model
--dimon 02:18, 25 July 2007 (CDT)
New 3D model of board uploaded. This is model with GPS module and audio connector. See here: 3D model + GPS
What about board? Can I start make design? Or need discuss more?
--dimon 21:11, 25 July 2007 (CDT)
