Difference between revisions of "Camera Accessories"
OneArtPlease (talk | contribs) |
OneArtPlease (talk | contribs) |
||
| Line 1: | Line 1: | ||
| − | [[Image:Camera case.jpg|thumb|left|220px | + | [[Image:Camera case.jpg|thumb|left|220px]] |
<br> '''Camera Case'''<br> | <br> '''Camera Case'''<br> | ||
| Line 10: | Line 10: | ||
Product Code: Case <br><br> | Product Code: Case <br><br> | ||
| − | |||
| − | |||
<br> | <br> | ||
| Line 27: | Line 25: | ||
Price: $100<br> | Price: $100<br> | ||
| − | Product Code: [http://www3.elphel.com/importwiki?title=Elphel_camera_parts_0353-12#0353-12-11_-_Elbow_45_deg._for_the_sensor_front_end 0353-12-11] | + | Product Code: [http://www3.elphel.com/importwiki?title=Elphel_camera_parts_0353-12#0353-12-11_-_Elbow_45_deg._for_the_sensor_front_end 0353-12-11]<br> |
| − | |||
| − | <br> | ||
---- | ---- | ||
Revision as of 05:14, 2 November 2011
Camera Case
Specially designed foam mold to hold one Elphel camera with lens plus power supply and cables in convinient to carry around briefcase like box
Price: $50
Product Code: Case
45° Angle Piece
45° adapter accessory part can be used as spacer between the sensor frontend and system board (main enclosure) part of the camera. The photograph shows the completely assembled camera with 45° adapter.
Price: $100
Product Code: 0353-12-11
90° Angle Piece
90° adapter accessory part can be used as spacer between the sensor frontend and system board (main enclosure) part of the camera. The photograph shows the completely assembled camera with 90° adapter installed.
Price: $70
Product Code: 0353-12-14
135° Angle Piece
A 135° adapter can be created by combining 45° and 90° adapter.
Using a very wide angle lens or fisheye this allows easy monitoring of a complete room when installed in a ceiling corner.
Price: $150
Product Code: SFE-A132
[[Image:Cable RS232 out.jpeg|thumb|left|220px|Cable RS232 out.jpeg
RS-232 Adapter/Cable
is used to connect to the serial port of NC353L-369 cameras. This port outputs all the boot and debug messages and provides system console that can be used for software development - this console allows to control the camera even if the network is misconfigured.
This kit consists of 2 parts:
0353-01-04 - DB9 to modular adapter with custom wiring and a
0353-01-05 - 6-wire modular cable with crossover wiring (6-wire modular telephone cable)
Price: ? $
| Accessory | Accessory description | price |
| PW-130 | Midspan power supply [by Ault or equivalent] | $30 |
| EMS120150-P5P-SZ | XFRMR 18W 12V Power Supply 1.5A MULTI PLUG [by CUI Inc] (This is useful for testing purposes with our 12-36v Battery Power camera only) | $25 |
| EZPOEPA02 | Passive Ethernet cable power injector with cat5 cable [by E-zy] (Required for all 12v-36v or Battery Power cameras) | $10 |
| H2Z0414C-MP | Computar Varifocal Lens, 4-8mm F1.4 Manual Iris Vari-Focal C-Mount, Megapixel | $155 |
| H3Z4518CS-MPIR | 4.5-13.2mm F1.8 Manual Iris Vari-Focal Lens CS-Mount, 3 MPix, Day/Night, IR New! | $275 |
| 353-07-33 |
Sunex SuperFisheye Lens EFL=1.3mm, F/2.0, IR cut-off at 670nm. Barrel threaded M12 + M12 adapter for C-Mount + Assembly New! | $175 |
| CompactFlash | Add one 4 GB Compact Flash to your NC353L-369 model (Up to two CF cards can be installed in the camera) | $50 |
| PTP1000445 |
Mercurien weatherproof IP68 single camera outdoor enclosure - specs.PDF - New! | $950 |
| PTP1000446 |
Mercurien weatherproof IP68 stereo 3D camera outdoor enclosure - specs.PDF - New! | $1650 |
