|
|
| Line 27: |
Line 27: |
| | | [[Elphel_camera_parts_0353-12#0353-12-42B_-_Bottom_SFE_mount.2C_Revision_.22B.22|0353-12-42B - Bottom SFE mount, Revision "B" ]] || 2 || 12 || | | | [[Elphel_camera_parts_0353-12#0353-12-42B_-_Bottom_SFE_mount.2C_Revision_.22B.22|0353-12-42B - Bottom SFE mount, Revision "B" ]] || 2 || 12 || |
| | |- | | |- |
| − | | [[Elphel_camera_parts_0353-19#0353-19-02_-_CF_support|0353-19-02 - CF support ]] || 1 || 3 || | + | | [[Elphel_camera_parts_0353-19#0353-19-02_-_CF_support|0353-19-02 - CF support ]] || 1 || 6 || |
| | |- | | |- |
| − | | [[Elphel_camera_parts_0353-19#0353-19-17_-_Tube_Body|0353-19-17 - Multi-camera PCB Mount, Aluminum]] || 9 || 28 || | + | | [[Elphel_camera_parts_0353-19#0353-19-17_-_Multi-camera PCB Mount, Aluminum|0353-19-17 - Multi-camera PCB Mount, Aluminum]] || 9 || 55 || |
| | |- | | |- |
| − | | [[Elphel_camera_parts_0353-19#0353-19-64D_-_SFE_Module.2C_Base.2C_Rev_.22D.22|0353-19-64D - SFE Module, Base, Rev "D" ]] || 10 || 33 || MAKE IN USA | + | | [[Elphel_camera_parts_0353-19#0353-19-64D_-_SFE_Module.2C_Base.2C_Rev_.22D.22|0353-19-64D - SFE Module, Base, Rev "D" ]] || 10 || 65 || MAKE IN USA |
| | |- | | |- |
| − | | [[Elphel_camera_parts_0353-19#0353-19-641D_-_SFE_Module.2C_Base.2C_with_shifted_lens_center.2C_Rev_.22D.22|0353-19-641D - SFE Module, Base, with shifted lens center, Rev "D" ]] || 16 || 52 || MAKE IN USA | + | | [[Elphel_camera_parts_0353-19#0353-19-641D_-_SFE_Module.2C_Base.2C_with_shifted_lens_center.2C_Rev_.22D.22|0353-19-641D - SFE Module, Base, with shifted lens center, Rev "D" ]] || 16 || 105 || MAKE IN USA |
| | |- | | |- |
| − | | [[Elphel_camera_parts_0353-19#0353-19-642_-_SFE_mount_spacer|0353-19-642 - SFE mount spacer ]] || 4 || 12 || MAKE IN USA | + | | [[Elphel_camera_parts_0353-19#0353-19-65F_-_SFE_Plate.2C_revision_.22F.22|0353-19-65F - SFE Plate, revision "F" ]] || 26 || 170 || MAKE IN USA |
| | |- | | |- |
| − | | [[Elphel_camera_parts_0353-19#0353-19-65B_-_SFE_Plate.2C_revision_.22B.22|0353-19-65B - SFE Plate, revision "B" ]] || 26 || 85 || MAKE IN USA | + | | [[Elphel_camera_parts_0353-19#0353-19-651B_-_Sensor_ring.2C_Revision_.22B.22|0353-19-651B - Sensor ring, Revision "B" ]] || 26 || 170 || MAKE IN USA |
| | |- | | |- |
| | | [[Elphel_camera_parts_0353-19#0353-19-66C_-_Pano_head_external_body_top.2Fbottom_Rev_.22C.22|0353-19-66C - Pano head external body top/bottom Rev "C" ]] || 2 || 6 || | | | [[Elphel_camera_parts_0353-19#0353-19-66C_-_Pano_head_external_body_top.2Fbottom_Rev_.22C.22|0353-19-66C - Pano head external body top/bottom Rev "C" ]] || 2 || 6 || |
Elphel, Inc. invites the machine shops to Quote manufacturing of the following parts for the new Eyesis 4Pi camera:
Camera Metal Parts
| Part |
QTY per Unit |
Qty Total |
Notes
|
| 0353-10-231D - Tube Body (with bottom lens openings and power board l=1067mm), low SFE moved up 10mm, Rev "D" |
1 |
6 |
MAKE in USA
|
| 0353-10-24A - Tube Body, IMU (rev. "A") |
1 |
6 |
MAKE in USA
|
| 0353-10-25 - Mount Tube |
1 |
6 |
MAKE in USA
|
| 0353-11-131A - Cap, bottom ring, Revision "A" |
1 |
6 |
|
| 0353-11-132A - GPS cap, top Revision "A" |
1 |
6 |
|
| 0353-11-133A - GPS cap, middle ring, Rev. "A" |
1 |
6 |
|
| 0353-12-401A - Shade fins, top/bottom, Revision "A" |
16 |
100 |
|
| 0353-12-402A - Shade fins, middle |
8 |
50 |
|
| 0353-12-403 - Shade fins, circular |
4 |
25 |
|
| 0353-12-41 - Shade connector plate |
16 |
50 |
|
| 0353-12-42B - Bottom SFE mount, Revision "B" |
2 |
12 |
|
| 0353-19-02 - CF support |
1 |
6 |
|
| 0353-19-17 - Multi-camera PCB Mount, Aluminum |
9 |
55 |
|
| 0353-19-64D - SFE Module, Base, Rev "D" |
10 |
65 |
MAKE IN USA
|
| 0353-19-641D - SFE Module, Base, with shifted lens center, Rev "D" |
16 |
105 |
MAKE IN USA
|
| 0353-19-65F - SFE Plate, revision "F" |
26 |
170 |
MAKE IN USA
|
| 0353-19-651B - Sensor ring, Revision "B" |
26 |
170 |
MAKE IN USA
|
| 0353-19-66C - Pano head external body top/bottom Rev "C" |
2 |
6 |
|
| 0353-19-671 - Pano head internal body top/bottom, half |
4 |
12 |
No thread in Dowel Pins Holes!
|
| 0353-19-68 - Spacer plate |
1 |
3 |
|
| 0353-19-69 - Pano head external body, middle section |
1 |
3 |
|
| 0353-19-70 - Pano head internal body middle, half |
2 |
6 |
No thread in Dowel Pins Holes!
|
| 0353-19-71 - PCB Support |
8 |
25 |
|
| 0353-19-72 - PCB Mount Rev. "A" |
8 |
25 |
|
| 0353-19-73B - PCB Rail Mount, back, Revision "B" |
6 |
12 |
New Revision!
|
| 0353-19-732 - PCB Rail Mount, back, top |
1 |
3 |
|
| 0353-19-733 - Riser board support |
2 |
6 |
|
| 0353-19-74B - PCB Rail Mount, front Revision "B" |
4 |
12 |
Sharper corners in square holes!
|
| 0353-19-742 - Bottom unit connector panel |
1 |
3 |
|
| 0353-19-743 - Cable holder |
4 |
12 |
|
| 0353-19-744B - Cable support bracket, Revision "B" |
2 |
6 |
|
| 0353-19-76 - SSD Rail Mount |
11 |
35 |
|
| 0353-19-77 - FPC Holder |
27 |
85 |
|
| 0353-19-771 - Cable clamp |
6 |
12 |
|
| 0353-19-78 - FPC Holder, short |
2 |
6 |
|
| 0353-19-791 - PCB support panel |
1 |
3 |
|
| 0353-19-80A - Rail Support, Top, Revision "A" |
1 |
3 |
|
| 0353-19-81 - Tube Body, Bottom |
1 |
3 |
|
| 0353-19-82 - Tube Lock |
1 |
3 |
|
| 0353-19-83 - Ring, Stainless Steel OD=69.5mm ID=64.5mm t=2mm |
2 |
6 |
|
| 0353-19-84 - Tube Rail, OD=0.25", ID=0.152", l=718mm |
4 |
12 |
MAKE in USA
|
| 0353-19-841A - Tube Rail, OD=0.25", ID=0.152", l=913mm |
8 |
24 |
MAKE in USA
|
| 0353-19-85 - Ring |
1 |
3 |
|
| 0353-19-86 - Hose Connector, Network |
1 |
3 |
|
| 0353-19-87 - Hose Connector, SATA |
1 |
3 |
|
| 0353-19-88 - Tube Adapter |
2 |
6 |
|
| 0353-19-89 - Tube Lock |
4 |
12 |
|
| 0353-19-90 - IMU Mount, Bottom |
1 |
3 |
Will be modified!
|
| 0353-19-91 - IMU Mount, Top |
1 |
3 |
|
| 0353-19-92 - Spacer, IMU Mount |
4 |
12 |
|
| 0353-19-93 - Bracket Fixating |
2 |
8 |
|
| 0353-19-94 - Sensor PCB cover |
26 |
85 |
MAKE IN USA
|
| 0353-19-95 - Tube |
78 |
250 |
PROVIDE SAMPLE
|
| 00353-19-97 - Support rod |
78 |
250 |
PROVIDE SAMPLE
|
| 00353-19-98 - Support rod cap |
78 |
250 |
PROVIDE SAMPLE
|
| 0353-19-99-18 - Compensation ring, l=1.8mm |
26 |
85 |
MAKE IN USA
|
| 0353-19-100 - Antenna plate |
1 |
3 |
|
