Difference between revisions of "Elphel camera parts 0393-27"
(→0393-27-13 - Tube cap) |
|||
| Line 52: | Line 52: | ||
This plate is used in combination with 0393-27-14. | This plate is used in combination with 0393-27-14. | ||
{{Cad4c|0393-27-15}} | {{Cad4c|0393-27-15}} | ||
| + | ---- | ||
| + | |||
| + | === 0393-27-16 - Calibration SFE housing === | ||
| + | {{Cad4c|0393-27-16}} | ||
| + | ---- | ||
| + | |||
| + | === 0393-27-17 - Cable strain relief for calibration SFE housing === | ||
| + | Used with 0393-27-16. | ||
| + | {{Cad4c|0393-27-17}} | ||
---- | ---- | ||
Revision as of 15:13, 24 January 2017
Elphel NC393 series camera parts
All parts on this page were prepared for 3D printing. Some of them have support elements manually place in most critical parts, so you do not need to enable support elements in your slicer software. All those elements can be easily removed after printing. We used Ultimaker2 with 0.4 mm nozzle for 3D printing all of these parts and achieved good results with 0.7 mm wall thickness and 20% infill density. We posted some examples of 3D printed parts on our blog
One of the parts below, 0393-27-07, is a helper object. It was specifically created for cutting out of SFE mount place in custom designs.
Contents
- 1 0393-27-01f - C/CS SFE adapter
- 2 0393-27-02d - Adapter for camera body
- 3 0393-27-03c - Support frame adapter
- 4 0393-27-04 - Cable strain relief for 0393-27-03c
- 5 0393-27-05 - Cable strain relief for 0393-27-01f
- 6 0393-27-06 - Cable strain relief for 0393-27-03c
- 7 0393-27-07 - SFE cutout part
- 8 0393-27-08a - SFE adapter
- 9 0393-27-09 - SFE adapter
- 10 0393-27-10 - Cable strain relief for 0393-27-03c or 0393-27-02d
- 11 0393-27-12 - SFE support platform for press fit kit
- 12 0393-27-13 - Tube cap
- 13 0393-27-14 - Mount band
- 14 0393-27-15 - IMU support plate
- 15 0393-27-16 - Calibration SFE housing
- 16 0393-27-17 - Cable strain relief for calibration SFE housing
0393-27-01f - C/CS SFE adapter
|
Copyright © 2024 Elphel Inc., Licensed under [1], GNU FDL v.1.3 | |||
0393-27-02d - Adapter for camera body
|
Copyright © 2024 Elphel Inc., Licensed under [2], GNU FDL v.1.3 | |||
0393-27-03c - Support frame adapter
|
Copyright © 2024 Elphel Inc., Licensed under [3], GNU FDL v.1.3 | |||
0393-27-04 - Cable strain relief for 0393-27-03c
|
Copyright © 2024 Elphel Inc., Licensed under [4], GNU FDL v.1.3 | |||
0393-27-05 - Cable strain relief for 0393-27-01f
|
Copyright © 2024 Elphel Inc., Licensed under [5], GNU FDL v.1.3 | |||
0393-27-06 - Cable strain relief for 0393-27-03c
|
Copyright © 2024 Elphel Inc., Licensed under [6], GNU FDL v.1.3 | |||
0393-27-07 - SFE cutout part
|
Copyright © 2024 Elphel Inc., Licensed under [7], GNU FDL v.1.3 | |||
0393-27-08a - SFE adapter
|
Copyright © 2024 Elphel Inc., Licensed under [8], GNU FDL v.1.3 | |||
0393-27-09 - SFE adapter
|
Copyright © 2024 Elphel Inc., Licensed under [9], GNU FDL v.1.3 | |||
0393-27-10 - Cable strain relief for 0393-27-03c or 0393-27-02d
|
Copyright © 2024 Elphel Inc., Licensed under [10], GNU FDL v.1.3 | |||
0393-27-12 - SFE support platform for press fit kit
This platform facilitates disk springs support pins installation into SFEs.
|
Copyright © 2024 Elphel Inc., Licensed under [11], GNU FDL v.1.3 | |||
0393-27-13 - Tube cap
|
Copyright © 2024 Elphel Inc., Licensed under [12], GNU FDL v.1.3 | |||
0393-27-14 - Mount band
This band is used to mount additional parts on top of NC393 camera. One of the possible parts is 0393-27-15 for IMU mount.
|
Copyright © 2024 Elphel Inc., Licensed under [13], GNU FDL v.1.3 | |||
0393-27-15 - IMU support plate
This plate is used in combination with 0393-27-14.
|
Copyright © 2024 Elphel Inc., Licensed under [14], GNU FDL v.1.3 | |||
0393-27-16 - Calibration SFE housing
|
Copyright © 2024 Elphel Inc., Licensed under [15], GNU FDL v.1.3 | |||
0393-27-17 - Cable strain relief for calibration SFE housing
Used with 0393-27-16.
|
Copyright © 2024 Elphel Inc., Licensed under [16], GNU FDL v.1.3 | |||
