Difference between revisions of "103891"
From ElphelWiki
| Line 30: | Line 30: | ||
|green | |green | ||
|} | |} | ||
| + | * [[Trigger_393#Internal_periodic_trigger_.284_fps.2C_from_fpga_generator.29_.2B_output_the_signal_to_external_port|Output trigger signal to external port]] | ||
* [[Media:103891a.pdf|103891 Rev "A" Circuit Diagram, Parts List, PCB layout]] | * [[Media:103891a.pdf|103891 Rev "A" Circuit Diagram, Parts List, PCB layout]] | ||
* [[Media:103891a gerber.tar.gz|103891 Rev "A" Gerber files]] | * [[Media:103891a gerber.tar.gz|103891 Rev "A" Gerber files]] | ||
Revision as of 10:22, 24 February 2017
103891 adapter board routes external sync I/O from the 10389 interface board to the back panel 2.5mm barrel connector and provide 4-pic connector socket for 3.3V/5.0V fan. It is used in Elphel 393 series cameras
Mechanical properties
- Dimensions: 58 x 38 x 9 mm (all connectors installed)
- Weight: 3.0 g
- Mechanical drawings and CAD files for the 103891 board: link
Links
- J2 connector: SJ1-42534-SMT-TR (datasheet)
- Sync cable example: 839-1029-ND
| XSYNC1 | pin 1 | black |
| SYNC_DRV | pin 2 | red |
| GND | pin 3 | white |
| XSYNC2 | pin 4 | green |
