Difference between revisions of "Driverless mode 393"
From ElphelWiki
(→Example: 1600x1200) |
(→Example: 1600x1200 window) |
||
| Line 82: | Line 82: | ||
membridge_start | membridge_start | ||
mem_save "/usr/local/verilog/sensor_dump" '''0x2e000000''' 0x400000</font> | mem_save "/usr/local/verilog/sensor_dump" '''0x2e000000''' 0x400000</font> | ||
| − | * copy | + | * copy (from an ssh session in another terminal) |
<font size=2>scp /usr/local/verilog/sensor_dump ip@host:/path/1600x1200_8bit.raw</font> | <font size=2>scp /usr/local/verilog/sensor_dump ip@host:/path/1600x1200_8bit.raw</font> | ||
====16-bit raw==== | ====16-bit raw==== | ||
| Line 104: | Line 104: | ||
* copy (from an ssh session in another terminal) | * copy (from an ssh session in another terminal) | ||
<font size=2>scp /usr/local/verilog/sensor_dump ip@host:/path/1600x1200_16bit.raw</font> | <font size=2>scp /usr/local/verilog/sensor_dump ip@host:/path/1600x1200_16bit.raw</font> | ||
| + | |||
| + | ===Example: other window sizes=== | ||
| + | * Download and run [https://git.elphel.com/Elphel/x393/blob/master/py393/mt9f002_window_generator.py mt9f002_window_generator.py] | ||
| + | * Then edit the code snippets for 1600x1200 according to the new window size | ||
| + | |||
[[Category:393]] | [[Category:393]] | ||
Revision as of 09:03, 3 April 2018
Contents
Description
Instructions on how to disable sensor driver and get images from image sensor (for MT9F002 sensor)
Instructions
pre
- to load bitstream for MT9F002 appropriate changes need to be made to:
- device tree
set sensors to mt9f002 in elphel393-detect_sensors,sensors entry
- /etc/elphel393/default_10389.xml for setup w/o 10389 or 10389's eeprom otherwise write MT9F002 as application
- Disable driver
root@elphel393~# touch /etc/elphel393/disable_driver # then reboot
init
- start python session:
root@elphel393~# cd /usr/local/verilog/; test_mcntrl.py @hargs-after
- init (if the driver is not disabled the i2c writes will not work):
setup_all_sensors True None 0x1 False 4384 3280 write_sensor_i2c 0 1 0 0x31c08000 # hispi timing write_sensor_i2c 0 1 0 0x030600b4 # pll multiplier write_sensor_i2c 0 1 0 0x31c68400 # hispi control status write_sensor_i2c 0 1 0 0x306e9280 # datapath select write_sensor_i2c 0 1 0 0x301a001c # reset and start streaming hispi_phases_adjust 0 write_sensor_i2c 0 1 0 0x301a001c # reset and start streaming setup_all_sensors True None 0x1 False 4384 3280 compressor_control all None None None None None 2 program_gamma all 0 0.57 0.04 write_sensor_i2c 0 1 0 0x3028000a # global gain write_sensor_i2c 0 1 0 0x302c000d # some gain write_sensor_i2c 0 1 0 0x302e0010 # some gain write_sensor_i2c 0 1 0 0x30120080 # coarse exposure jpeg_acquire_write #write_sensor_i2c 0 1 0 0x301a0018 # put to standby
- inspect image:
http://192.168.0.9/img.jpeg
Example: 1600x1200 window
8-bit compress to jpeg
- setup:
write_sensor_i2c 0 1 0 0x3002001e write_sensor_i2c 0 1 0 0x300604f5 write_sensor_i2c 0 1 0 0x034e04d8 write_sensor_i2c 0 1 0 0x300a056a write_sensor_i2c 0 1 0 0x30040090 write_sensor_i2c 0 1 0 0x300806cf write_sensor_i2c 0 1 0 0x034c0640 write_sensor_i2c 0 1 0 0x300c04c8 setup_all_sensors True None 0x1 False 1600 1200 compressor_control all None None None None None 2 write_sensor_i2c 0 1 0 0x301a001c # wait write_sensor_i2c 0 1 0 0x301a0018 jpeg_acquire_write
- inspect:
refresh http://192.168.0.9/img.jpeg
8-bit raw
- setup
same as above, no need to repeat if already done
- capture (copy-pasting the code below with comments will work)
setup_all_sensors True None 0x1 False 1600 1200 write_sensor_i2c 0 1 0 0x301a001c # wait write_sensor_i2c 0 1 0 0x301a0018 # notice membridge_start (under Setting membridge for sensor 0) # it can be different: 0x2e000000 or 0x2dc00000 membridge_start mem_save "/usr/local/verilog/sensor_dump" 0x2e000000 0x400000
- copy (from an ssh session in another terminal)
scp /usr/local/verilog/sensor_dump ip@host:/path/1600x1200_8bit.raw
16-bit raw
- setup
same as above, no need to repeat if already done
- capture (copy-pasting the code below with comments will work)
# Notice that the window width in 16 bit mode is 2x setup_all_sensors True 18 0x1 False 3200 1200 set_sensor_mode 0 1 1 True True enable_memcntrl_en_dis 12 True write_sensor_i2c 0 1 0 0x301a001c # wait write_sensor_i2c 0 1 0 0x301a0018 # notice membridge_start (under Setting membridge for sensor 0) # it can be different: 0x2e000000 or 0x2dc00000 membridge_start mem_save "/usr/local/verilog/sensor_dump" 0x2e000000 0x400000
- copy (from an ssh session in another terminal)
scp /usr/local/verilog/sensor_dump ip@host:/path/1600x1200_16bit.raw
Example: other window sizes
- Download and run mt9f002_window_generator.py
- Then edit the code snippets for 1600x1200 according to the new window size
