Difference between revisions of "Lbcontrol"
From ElphelWiki
(initial describe) |
|||
| Line 2: | Line 2: | ||
In System Programmer for programm lens control board CPU | In System Programmer for programm lens control board CPU | ||
| + | |||
| + | Support only ATtiny26 | ||
| + | Only page programming mode support | ||
| + | Not support segment addressing and more then 64K flash programming | ||
| + | Read flash image only in Intel HEX format | ||
| + | Read EEPROM image only in binary format, first 128 bytes programmed into EEPROM | ||
| + | In the flash image support only step-by-step increase address, without hole. | ||
| + | |||
| + | The variable describe size of buffer for string reading flash image, size of EEPROM. Default value is 128 bytes. | ||
Revision as of 23:58, 29 September 2005
Discussion on russian lbcontrol_Ru
In System Programmer for programm lens control board CPU
Support only ATtiny26 Only page programming mode support Not support segment addressing and more then 64K flash programming Read flash image only in Intel HEX format Read EEPROM image only in binary format, first 128 bytes programmed into EEPROM In the flash image support only step-by-step increase address, without hole.
The variable describe size of buffer for string reading flash image, size of EEPROM. Default value is 128 bytes.
