Difference between revisions of "Lbcontrol"

Revision as of 16:17, 2 October 2005

Discussion on russian lbcontrol_Ru

In System Programmer for programm lens control board CPU

Using:

 lbcontrol [opts]

   -wf file       write file to flash

   -rf file       read flash and write to file

   -we file       write file to EEPROM

   -re file       read EEPROM and write to file

   -e             erase chip

   -RE addr       read single byte from EEPROM

   -WE addr byte  write single byte to EEPROM

   -rl            read lock bits

   -wl byte       write lock bits (0xFF - not lock programming and reading; 0xFE - programming disable, reading enable; 0xFC - programming disable, reading disable)

   -rc            read calibration byte

   -rs            read signature

   -ruh           read fuse high byte

   -wuh byte      write fuse high byte

   -rul           read fuse low byte

   -wul byte      write fuse low byte

   -h             this help

Limitations:

 Support only ATtiny26
 Only page programming mode support
 Not support segment addressing and more then 64K flash programming
 Read flash image only in Intel HEX format
 Read EEPROM image only in binary format, first 128 bytes programmed into EEPROM
 In the flash image support only step-by-step increase address, without hole.

The variable LINEBUF_SIZE describe size of buffer for string reading flash image, size of EEPROM. Default value is 128 bytes.