Difference between revisions of "10338"
From ElphelWiki
OneArtPlease (talk | contribs) |
|||
| Line 3: | Line 3: | ||
[[Image:10338bot_sm.jpeg|frame|[[Media:10338bot.jpeg|10338 board, bottom view]]]] | [[Image:10338bot_sm.jpeg|frame|[[Media:10338bot.jpeg|10338 board, bottom view]]]] | ||
[[Image:10338bd.png|frame|[[Media:10338asch.pdf|10338 Circuit Diagram]]]] | [[Image:10338bd.png|frame|[[Media:10338asch.pdf|10338 Circuit Diagram]]]] | ||
| − | 10338 is designed to interface Micron MT9P031/MT9P001 5MPix (2592x1944) sensor to [[353|Elplhel Model 353/363 Cameras]]. It is a first Elphel sensor board designed specifically to be compatible with 2.5V LVTTL interface in the 353 cameras. Earlier sensor boards need a redesign to limit output voltage swing to 2.5V required by the 10353 board. | + | 10338 is designed to interface Aptina (before Micron) MT9P031/MT9P001 5MPix (2592x1944) sensor to [[353|Elplhel Model 353/363 Cameras]]. It is a first Elphel sensor board designed specifically to be compatible with 2.5V LVTTL interface in the 353 cameras. Earlier sensor boards need a redesign to limit output voltage swing to 2.5V required by the 10353 board. |
Connectors: | Connectors: | ||
* 30-pin flex cable connector (J1) for data and power. | * 30-pin flex cable connector (J1) for data and power. | ||
Revision as of 10:51, 24 May 2008
10338
10338 is designed to interface Aptina (before Micron) MT9P031/MT9P001 5MPix (2592x1944) sensor to Elplhel Model 353/363 Cameras. It is a first Elphel sensor board designed specifically to be compatible with 2.5V LVTTL interface in the 353 cameras. Earlier sensor boards need a redesign to limit output voltage swing to 2.5V required by the 10353 board.
Connectors:
- 30-pin flex cable connector (J1) for data and power.
