Elphel camera parts: Difference between revisions
Jump to navigation
Jump to search
| Line 93: | Line 93: | ||
|- | |- | ||
| 0353-18-02 || 1 | | 0353-18-02 || 1 | ||
|- | |||
| 0353-18-05 || 1 | |||
|- | |||
| 0353-18-06 || 1 | |||
|- | |- | ||
| 0353-19-02 || 1 | | 0353-19-02 || 1 | ||
Revision as of 17:15, 14 October 2008
Camera Assemblies
NC353L
NC353L with 10369A and two CF cards
|
NC353L with 10369A and 1.8" HDD
|
0353-00 - PCB assemblies
0353-00-01 - 10353 rev E assembly
| Notes:Some individual components are not shown in the model. |
0353-00-02 - 10369 rev A assembly
| Notes:Some individual components are not shown in the model. |
0353-00-03 - 103693 rev A assembly
| Notes:Some individual components are not shown in the model. |
0353-00-04 - 103691 rev A assembly
0353-00-06 - 10338 rev A assembly
| Notes:Some individual components are not shown in the model. |
0353-00-07 - 103692 assembly
0353-01 - cable assemblies
0353-01-01 - flex jumper, 30 conductors, 0.5mm pitch, l=30mm, t=0.3mm both ends
0353-01-02 - flex jumper, 10 conductors, 0.5mm pitch, l=76mm, t=0.3mm both ends
0353-01-03 - flex jumper, 40 conductors, 0.5mm pitch, l=76mm (one end t=0.3mm, other end t=0.2mm)
0353-01-04 - RJ45/DB9F Modular Adapter, wired
The wiring is described on RJ45/DB9F_Modular_Adapter
0353-01-05 - 6P6C crossed modular cable
0353-02 - other electronic assemblies
0353-02-01 - CF card
0353-02-02 - 1.8" HDD
0353-02-03 - 2.5" HDD
Major camera enclosure parts
0353-10 - bottoms
0353-10-01 - camera bottom, l=104.77mm
0353-10-02 - camera bottom, l=104.77mm
(tripod mount moved forward)
0353-11 - tops
0353-11-01 - camera top plain (no connector holes), l=104.77mm
0353-11-02 - camera top with connector holes for the 10369 (serial port, optoisolated I/O), l=104.77mm
0353-11-03 - camera top with connector holes for the 10369 (serial port, optoisolated I/O), and 1.8" HDD, l=104.77mm
0353-12 - front ends
0353-12-01 - Sensor front end for 10318/10338 boards
0353-13 - back panels
0353-13-01 - Back panel, only network (RJ45) connector
0353-13-02 - Back panel, with holes for network, SATA and USB connectors
0353-17 - decals/overlays
0353-17-01 - back panel overlay, network only
0353-17-02 - back panel overlay for 10369A (RJ45, SATA, USB)
0353-17-03 - bottom overlay
0353-18 - parts external other
0353-18-01 - tripod mount, 1/4-20 thread
0353-18-02 - connector cover
0353-18-03 - Enclosure for the 1.8" HDD, bottom
0353-18-04 - Enclosure for the 1.8" HDD, top
0353-18-05 - 5mm C mount adapter ring
0353-18-06 - C mount cap
0353-19 - parts internal other
0353-19-01 - CF support
0353-19-02 - CF support
0353-19-03 - OS5000 support
0353-20 - custom mounting parts
0353-20-01 - standoff, M2/M2.5, 14.5mm high, DIA 4.5mm
0353-30 - insulator tubing, spacers, tapes
0353-30-01 - insulator tubing, l=12.5mm , ID=4.5MM (heat shrink OK)
0353-30-02 - Flex cable holder for the HDD
0353-60 - custom extruded profiles
0353-60-01 - aluminum extrusion for camera bottoms
0353-60-02 - aluminum extrusion for camera tops
0353-70 - optical components
0353-70-01 - IR cutoff filter, DIA 20.0mm, t=0.3mm
0353-80 - other standard parts
0353-85 - threaded spacers for other than M2 and M2.5
0353-86 - threaded spacers for M2.5
0353-87 - threaded spacers for M2
0353-88 - unthreaded spacers for other than M2 and M2.5
0353-89 - unthreaded spacers for M2.5
0353-90 - unthreaded spacers for M2
0353-90-01 - spacer, l=4mm (~McMaster p/n 92510A005 - approximate to metric)
0353-91 - nuts for other than M2 and M2.5
0353-92 - nuts for M2.5
0353-93 - nuts for M2
0353-94 - washers for other than M2 and M2.5
0353-95 - washers for M2.5
0353-96 - washers for M2
0353-96-01 - washer, stainless steel,
McMaster p/n 90965A110





























