Difference between revisions of "Talk:Porting Theora to 353 cameras"

From ElphelWiki
Jump to: navigation, search
Line 1: Line 1:
 
Ok, I started a new page on the Theora project in 353 cameras. I started with a global approach and a list of modules that need to be changed or replaced on the 353 model. Feel free to correct me or add suggestions as I'm not (yet...) an expert on Elphel cameras. I think the first step is to make an exhaustive list of the hardware blocks that need modifications and then detail what need to be done in each block. --[[User:JeremViewsurf|JeremViewsurf]] 03:48, 19 February 2008 (CST)
 
Ok, I started a new page on the Theora project in 353 cameras. I started with a global approach and a list of modules that need to be changed or replaced on the 353 model. Feel free to correct me or add suggestions as I'm not (yet...) an expert on Elphel cameras. I think the first step is to make an exhaustive list of the hardware blocks that need modifications and then detail what need to be done in each block. --[[User:JeremViewsurf|JeremViewsurf]] 03:48, 19 February 2008 (CST)
 +
 +
 +
As I understand your first need is not a streaming but producing a small video clip to be uploaded via FTP. This can be done more easy with minimal non FPGA modifications.
 +
 +
We will probably create a CVS branch for your port, to be able to test it we need to compile a standard 7.1.x firmware disabling everything sensor or FPGA related and change the FPGA bitstream. --[[User:Polto|Alexandre.Poltorak]] 07:53, 19 February 2008 (CST)

Revision as of 06:53, 19 February 2008

Ok, I started a new page on the Theora project in 353 cameras. I started with a global approach and a list of modules that need to be changed or replaced on the 353 model. Feel free to correct me or add suggestions as I'm not (yet...) an expert on Elphel cameras. I think the first step is to make an exhaustive list of the hardware blocks that need modifications and then detail what need to be done in each block. --JeremViewsurf 03:48, 19 February 2008 (CST)


As I understand your first need is not a streaming but producing a small video clip to be uploaded via FTP. This can be done more easy with minimal non FPGA modifications.

We will probably create a CVS branch for your port, to be able to test it we need to compile a standard 7.1.x firmware disabling everything sensor or FPGA related and change the FPGA bitstream. --Alexandre.Poltorak 07:53, 19 February 2008 (CST)