Difference between revisions of "10369"
From ElphelWiki
(Initial release of the 10369 description) |
|||
| Line 9: | Line 9: | ||
** RS-232 port | ** RS-232 port | ||
** Opto-isolated I/O port for synchronizing the camera or synchronizing together multiple cameras (modular RJ11 external connector) | ** Opto-isolated I/O port for synchronizing the camera or synchronizing together multiple cameras (modular RJ11 external connector) | ||
| − | ** Opto-isolated I/O port for synchronizing | + | ** Opto-isolated I/O port for synchronizing multiple camera modules in the same enclosure (flex cable connectors) |
** Digital thermometer with internal ("system") and external thermal sensor (emitter-base junction of PNP or NPN transistor) | ** Digital thermometer with internal ("system") and external thermal sensor (emitter-base junction of PNP or NPN transistor) | ||
** Fan driver, controlled by the digital thermometer with programmable on/off temperature | ** Fan driver, controlled by the digital thermometer with programmable on/off temperature | ||
Revision as of 18:39, 24 June 2008
10369
10369 interface board is an extension board for the Elphel 353/363 series cameras.
- It provides multiple interfaces and peripherals to the camera:
- SATA port for external disk drives
- Compact Flash (in "True IDE" mode) and IDE HDD ports (with adapter/riser boards: 103691, 103692)
- RS-232 port
- Opto-isolated I/O port for synchronizing the camera or synchronizing together multiple cameras (modular RJ11 external connector)
- Opto-isolated I/O port for synchronizing multiple camera modules in the same enclosure (flex cable connectors)
- Digital thermometer with internal ("system") and external thermal sensor (emitter-base junction of PNP or NPN transistor)
- Fan driver, controlled by the digital thermometer with programmable on/off temperature
- Clock/calendar with the super-capacitor backup power
- EEPROM for the board identification and configuration
- Connectors:
