Audio: Difference between revisions
Jump to navigation
Jump to search
OneArtPlease (talk | contribs) No edit summary |
OneArtPlease (talk | contribs) No edit summary |
||
| Line 13: | Line 13: | ||
=Software= | =Software= | ||
==Detect Devices== | |||
USB hardware is hot-plugable and should function just seconds after it was inserted. | |||
To test whether a USB audio device was detected execute the following in the console: | To test whether a USB audio device was detected execute the following in the console: | ||
| Line 22: | Line 25: | ||
Subdevices: 1/1 | Subdevices: 1/1 | ||
Subdevice #0: subdevice #0 | Subdevice #0: subdevice #0 | ||
==Test Audio Playback== | |||
Most USB audio hardware comes with a built in headphones jack or any other way of audio output. Once the device has been detected as described above you can connect your headphones. | |||
Revision as of 16:15, 21 September 2010
Parts to try
Approved parts
THE T.BONE MICPLUG USB : http://www.thomann.de/gb/the_tbone_micplug_usb.htm
The T.Bone MicPlug USB - USB interface with mic preamp and internal A/D converter (16bit, 44.1/48kHz), internal 48V phantom power, headphone output, professional preamp with adjustable gain, USB powered, includes USB cable.
Audio USB interface (with XLR-mic pre amp)
Microphones
Software
Detect Devices
USB hardware is hot-plugable and should function just seconds after it was inserted.
To test whether a USB audio device was detected execute the following in the console:
aplay -l
you should get a list of connected the devices similar to this:
**** List of PLAYBACK Hardware Devices **** card 0: default [USB AUDIO ], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0
Test Audio Playback
Most USB audio hardware comes with a built in headphones jack or any other way of audio output. Once the device has been detected as described above you can connect your headphones.