Difference between revisions of "Wishlist"
From ElphelWiki
(→External sensors support) |
(→External control) |
||
Line 65: | Line 65: | ||
*USB2.0 Support | *USB2.0 Support | ||
*Futaba interface (for robots) | *Futaba interface (for robots) | ||
+ | *Relay control |
Revision as of 05:40, 27 October 2008
As user I noticed some things I wanted to have on my camera, I hope anyone that has ideas can add them here. What features are you waiting for? What software components are still missing that you cannot live without?
Contents
Software
If a project has been completed just add the developer that did it, or is busy on it.
Sensor
- Dead/Hot pixel correction
- Fixed pattern noise (FPN) correction
- Flash mode for rolling shutter
- Lens distortion hardware correction
Compass
Networking
Fastest Boot
C API
UDMA support
- Enable UDMA in the Axis kernel. Needed to support most fast CF cards, will also boost speed on SATA.
Debayer Algorithmn
- Higher image quality debayer algorithmn FPGA implementation -> VNG
Hardware
What will the next elphel camera most likely entitled Elphel 373 be like?
Power Supply
optional 12V supply over additional jack
Sensor
Interface
- group VLDS pairs in flexible cable from sensor to board
Sony IMX021
- designed for DSLRs (possibly the sensor used in Nikon D300 / D90)
- 12.4 MPix
- 5.5 µm pixel
- 0.18 µm technology
- 28mm x 22.2 mm APS-C sized 1.8" image area (28.4 mm diagonal)
- 12 bit column ADC
- 10.4 fps in 12.4 MPix mode
- on-chip noise reduction
- parallel A/D for every pixel coloumn
CPU
- USB2.0 Support
External data sensors support
- DONE GPS
- DONE Compass
- Dry contact (simply switch event)
- DONE RFID
- Proximity
- Environment sensors: Temperature/Humidity/Pressure/Illuminance/Loudness/..
External control
- USB2.0 Support
- Futaba interface (for robots)
- Relay control