Difference between revisions of "353 in a nutshell"

From ElphelWiki
Jump to: navigation, search
(Dimensions & Weight)
(Connectors)
Line 18: Line 18:
 
[[Image:Camera-353-Nutshell-Connect.jpg]]
 
[[Image:Camera-353-Nutshell-Connect.jpg]]
  
'''SATA''': Can be used to connect any external SATA device that has linux support
+
'''SATA''': Can be used to connect any external SATA device that is supported under Linux
  
 
'''Ethernet''': 100MBit Network with POE (48V)
 
'''Ethernet''': 100MBit Network with POE (48V)
Line 28: Line 28:
 
'''Sync''': Can be used to sync multiple cameras or trigger shooting images externally
 
'''Sync''': Can be used to sync multiple cameras or trigger shooting images externally
  
'''RS323''':
+
'''RS323''': Access to Console and debug output
  
 
==technical specs==
 
==technical specs==

Revision as of 06:44, 2 April 2009

This page should give a very, very short brief overview about what Elphel 353 camera is all about.


Dimensions & Weight

Example: NC353L-10369-HDD with 10369 IO board and internal 1.8" HDD installed:

Camera-353-Nutshell-Dimensi.jpg

Dimensions without HDD: 116mm х 45mm х 45mm

NC353L Weight: 150 - 215g (depending on installed internal hardware, excluding HDD)

Connectors

Example: NC353L-10369-HDD with 10369 IO board and internal 1.8" HDD installed:

Camera-353-Nutshell-Connect.jpg

SATA: Can be used to connect any external SATA device that is supported under Linux

Ethernet: 100MBit Network with POE (48V)

USB: USB 1.1 with 5V power supply

IDE: Used to connect internal HDD

Sync: Can be used to sync multiple cameras or trigger shooting images externally

RS323: Access to Console and debug output

technical specs