Difference between revisions of "Elphel 353 series quick start guide"
Line 100: | Line 100: | ||
Firefox address line: http://192.168.0.9/phpshell.php | Firefox address line: http://192.168.0.9/phpshell.php | ||
+ | |||
+ | ===Reboot=== | ||
+ | In a terminal/phpshell type "reboot -f". | ||
==Serial port (10369 board required)== | ==Serial port (10369 board required)== |
Revision as of 16:42, 3 December 2010
Contents
Notes
- The following guide was written for (K)Ubuntu OS
- The camera has a web-based interface and it should work in any OS (Firefox browser is recommended)
Connection
When the camera is properly connected to a PC the leds on the back will go solid yellow and blinking green.
1. Standard PoE Injector
2. 12V Power Module (ONLY FOR 12V CAMERAS)
Network
The default camera IP address is 192.168.0.9* ("ping -b 192.168.0.255" if it accidentally has some other address)
Login: root
Password: pass
* Ensure that your PC or router/switch, the camera is connected to, has an IP address from the same subnetwork – that is 192.168.0.xxx.
Camera Index Page Menu
* It is recommended to use the Firefox browser.
- Main Applications menu items:
- Camera Control Interface
- Disk Recorder
- Parameter Editor
- Terminal
- System Preferences
- File Browser / Text Editor
Help Tips
Open the Camera Control Interface (camvc).
Getting the first images
camvc
In the Camera Control Interface (camvc): "Shift+Click" on the button to save.
browser
Camera GUI(camvc) Controls
Watch/record video stream over the network
There are several ways to watch/record video streams from the camera:
1. watch: camvc
First click on an icon with a "screen" (the 3rd one from the left) and then change the display mode to "a guy on a bicycle".
2. watch: player GUI / command line
To watch the video stream with MPlayer or VLC open the rtsp://192.168.0.9:554. You can use either a player GUI or a command line. Here is an example command from Linux terminal window:
mplayer rtsp://192.168.0.9:554 -vo x11 -zoom
vlc rtsp://192.168.0.9:554 -V x11
3. record: command line
mencoder rtsp://192.168.0.9:554 -ovc copy -fps <fps> -o <file_name>.mov where <fps> - approximate value of the frame frequency (this parameter is mandatory); <file_name>.mov - the name of an output file
or
vlc rtsp://192.168.0.9:554 -V x11 --sout file/ogg:<file_name>.mov
FTP access
Command line access
a) SSH
In the terminal window: ssh root@192.168.0.9
b) Telnet
In the terminal window: telnet 192.168.0.9
c) Phpshell
Firefox address line: http://192.168.0.9/phpshell.php
Reboot
In a terminal/phpshell type "reboot -f".
Serial port (10369 board required)
Speed: 115200 8N1
RTS/CTS: None
XON/XOFF : None