Difference between revisions of "Elphel 353 series quick start guide"

Revision as of 15:43, 3 December 2010

Notes

• The following guide was written for (K)Ubuntu OS
• The camera has a web-based interface and it should work in any OS (Firefox browser is recommended)

Connection

When the camera is properly connected to a PC the leds on the back will go solid yellow and blinking green.

1. Standard PoE Injector

Fig.1 Camera connection using a standard PoE Injector

2. 12V Power Module (ONLY FOR 12V CAMERAS)

Fig.3 12V camera connection

Network

The default camera IP address is 192.168.0.9* ("ping -b 192.168.0.255" if it accidentally has some other address)

Login: root

Password: pass

* Ensure that your PC or router/switch, the camera is connected to, has an IP address from the same subnetwork – that is 192.168.0.xxx.

Camera Index Page Menu

http://192.168.0.9 *

* It is recommended to use the Firefox browser.

• Main Applications menu items:
• Camera Control Interface
• Disk Recorder
• Parameter Editor
• Terminal
• System Preferences
• File Browser / Text Editor

Help Tips

Open the Camera Control Interface (camvc).

Fig.4 Help

Getting the first images

camvc

In the Camera Control Interface (camvc): "Shift+Click" on the button to save.

Fig.5 Acquire an image from the Camera Control Interface

browser

http://192.168.0.9:8081/bimg

Camera GUI(camvc) Controls

Fig.6 camvc controls

Watch/record video stream over the network

There are several ways to watch/record video streams from the camera:

1. watch: camvc

First click on an icon with a "screen" (the 3rd one from the left) and then change the display mode to "a guy on a bicycle".

Fig. 7 Turn on Live Video Stream

2. watch: player GUI / command line

To watch the video stream with MPlayer or VLC open the rtsp://192.168.0.9:554. You can use either a player GUI or a command line. Here is an example command from Linux terminal window:

mplayer  rtsp://192.168.0.9:554 -vo x11 -zoom

vlc rtsp://192.168.0.9:554 -V x11

3. record: command line

mencoder rtsp://192.168.0.9:554 -ovc copy -fps <fps> -o <file_name>.mov

where 
<fps>        - approximate value of the frame frequency (this parameter is mandatory); 
<file_name>.mov - the name of an output file

or

vlc rtsp://192.168.0.9:554 -V x11 --sout file/ogg:<file_name>.mov

FTP access

ftp://192.168.0.9

Command line access

a) SSH

In the terminal window: ssh root@192.168.0.9

b) Telnet

In the terminal window: telnet 192.168.0.9

c) Phpshell

Firefox address line: http://192.168.0.9/phpshell.php

Reboot

In a terminal/phpshell type reboot -f.

Serial port (10369 board required)

Speed: 115200 8N1

RTS/CTS: None

XON/XOFF : None

PHP samples

On the camera

On the PC