Difference between revisions of "Eyesis4Pi User Guide - Recording"
From ElphelWiki
(Created page with "==Package== * Eyesis4Pi * Switch 3CRDSF9PWR * PC ==Quick Start== * Turn the switch on. <br/><hr/> * Connect the camera's ethernet cables to the PoE enabled ports. Eyesis4Pi defa...") |
(No difference)
|
Revision as of 11:10, 22 May 2012
Package
- Eyesis4Pi
- Switch 3CRDSF9PWR
- PC
Quick Start
- Turn the switch on.
- Connect the camera's ethernet cables to the PoE enabled ports. Eyesis4Pi default IP addresses:
192.168.0.221-228
- Connect the PC to the Gigabit port of the switch.
Note: Do not confuse the Gigabit port with the Console port.
- Configure the PC's network settings:
IP address: 192.168.0.xxx (example, 192.168.0.68) Mask: 255.255.255.0
