Difference between revisions of "103891"

From ElphelWiki
Jump to: navigation, search
Line 30: Line 30:
 
|green
 
|green
 
|}
 
|}
* [[Trigger_393#Internal_periodic_trigger_.284_fps.2C_from_fpga_generator.29_.2B_output_the_signal_to_external_port|Output trigger signal to external port]]
+
* [[Trigger_393#Internal_periodic_trigger_.284_fps.2C_from_fpga_generator.29_.2B_output_the_signal_to_external_port|How to output trigger signal to external port]]
 
* [[Media:103891a.pdf|103891 Rev "A" Circuit Diagram, Parts List, PCB layout]]
 
* [[Media:103891a.pdf|103891 Rev "A" Circuit Diagram, Parts List, PCB layout]]
 
* [[Media:103891a gerber.tar.gz|103891 Rev "A" Gerber files]]
 
* [[Media:103891a gerber.tar.gz|103891 Rev "A" Gerber files]]

Revision as of 11:23, 24 February 2017

103891 adapter board routes external sync I/O from the 10389 interface board to the back panel 2.5mm barrel connector and provide 4-pic connector socket for 3.3V/5.0V fan. It is used in Elphel 393 series cameras

Fig.1 top
Fig.2 bot

Mechanical properties

  • Dimensions: 58 x 38 x 9 mm (all connectors installed)
  • Weight: 3.0 g
  • Mechanical drawings and CAD files for the 103891 board: link


Links

XSYNC1 pin 1 black
SYNC_DRV pin 2 red
GND pin 3 white
XSYNC2 pin 4 green