Difference between revisions of "Alternative IO board for 10353/10363 series"
From ElphelWiki
| Line 12: | Line 12: | ||
Dima, you should clearly mark is as a proposal for discussion.I would rather see (compact) lens control circuitry (both variants - 2-wire and EOS-compatible). Other people would suggest aaudio as a standard feature--[[User:Andrey.filippov|Andrey.filippov]] 09:56, 16 July 2007 (CDT) | Dima, you should clearly mark is as a proposal for discussion.I would rather see (compact) lens control circuitry (both variants - 2-wire and EOS-compatible). Other people would suggest aaudio as a standard feature--[[User:Andrey.filippov|Andrey.filippov]] 09:56, 16 July 2007 (CDT) | ||
| + | |||
| + | For 2-wire need 12V power supply. | ||
| + | Power requrements: | ||
| + | * 5V for USB 0.3A per port (max load) | ||
| + | * 12V 0.3A for 2-wire lens control board 10331 | ||
| + | --[[User:Dimon|dimon]] 18:41, 16 July 2007 (CDT) | ||
Revision as of 15:41, 16 July 2007
Description and duscussion about new IO board for 10353/10363 series
* USB ports, 1 external, 2 internal small non-standart connector pinhead 2mm pitch * serial port, pinhead connector 2mm pitch * IDE port for 1.8" hard drives with Flat Flex cable. * GPIO opto-isolated or via buffer, pinhead 2mm pitch * USB sound card on board with in-out * socket for GPS module. GPS module and serial port can not work together * 3-axises accelerometers
Comments??
Dima, you should clearly mark is as a proposal for discussion.I would rather see (compact) lens control circuitry (both variants - 2-wire and EOS-compatible). Other people would suggest aaudio as a standard feature--Andrey.filippov 09:56, 16 July 2007 (CDT)
For 2-wire need 12V power supply. Power requrements:
* 5V for USB 0.3A per port (max load) * 12V 0.3A for 2-wire lens control board 10331
--dimon 18:41, 16 July 2007 (CDT)
