Difference between revisions of "Wishlist"
From ElphelWiki
(→External control) |
(→External control) |
||
| Line 70: | Line 70: | ||
===External control=== | ===External control=== | ||
*USB2.0 Support | *USB2.0 Support | ||
| − | *Futaba servo control interface (for robots) [http://www.parallax.com/Store/Accessories/MotorServoControllers/tabid/160/CategoryID/35/List/0/Level/a/ProductID/346/Default.aspx?SortField=ProductName%2CProductName PSC] | + | *Futaba servo control interface (for robots) [http://www.parallax.com/Store/Accessories/MotorServoControllers/tabid/160/CategoryID/35/List/0/Level/a/ProductID/346/Default.aspx?SortField=ProductName%2CProductName PSC] [http://www.endurance-rc.com/pantilt.html Pan&Tilt] [http://www.openservo.com/ OpenServo] [http://www.embeddedrelated.com/usenet/embedded/show/46581-1.php Verilog solution] |
*Relay control | *Relay control | ||
*CAN support [http://www.qprotos.com/quickcan.htm quickcan] [http://www.gridconnect.com/usbcanin.html USB CAN Adapter] | *CAN support [http://www.qprotos.com/quickcan.htm quickcan] [http://www.gridconnect.com/usbcanin.html USB CAN Adapter] | ||
*DMX512 support [http://en.wikipedia.org/wiki/DMX-512 DMX512] | *DMX512 support [http://en.wikipedia.org/wiki/DMX-512 DMX512] | ||
Revision as of 02:31, 13 November 2008
As user I noticed some things I wanted to have on my camera, I hope anyone that has ideas can add them here. What features are you waiting for? What software components are still missing that you cannot live without?
Contents
Software
If a project has been completed just add the developer that did it, or is busy on it.
Sensor
- Dead/Hot pixel correction
- Fixed pattern noise (FPN) correction
- Flash mode for rolling shutter
- Lens distortion hardware correction
- Make image thumbnails (binning 8x8 from DCT[0,0] data)
Compass
Networking
Fastest Boot
C API
UDMA support
- Enable UDMA in the Axis kernel. Needed to support most fast CF cards, will also boost speed on SATA.
Debayer Algorithmn
- Higher image quality debayer algorithmn FPGA implementation -> VNG
Hardware
What will the next elphel camera most likely entitled Elphel 373 be like?
Power Supply
- optional 5-36V supply over additional jack DC/DC POE TI Article
Sensor
Position adjustment
- initial focus/pan/tilt sensor adjustment
Interface
- group VLDS pairs in flexible cable from sensor to board
Sony IMX021
- designed for DSLRs (possibly the sensor used in Nikon D300 / D90)
- 12.4 MPix
- 5.5 µm pixel
- 0.18 µm technology
- 28mm x 22.2 mm APS-C sized 1.8" image area (28.4 mm diagonal)
- 12 bit column ADC
- 10.4 fps in 12.4 MPix mode
- on-chip noise reduction
- parallel A/D for every pixel coloumn
CPU
- USB2.0 Support
External data sensors support
- DONE GPS
- DONE Compass
- Dry contact (simply switch event)
- DONE RFID
- Proximity
- Environment sensors: Temperature/Humidity/Pressure/Illuminance/Loudness/..
- Futaba servo captute interface (for robots)
External control
- USB2.0 Support
- Futaba servo control interface (for robots) PSC Pan&Tilt OpenServo Verilog solution
- Relay control
- CAN support quickcan USB CAN Adapter
- DMX512 support DMX512
