Eyesis workflow

Preface

The following page describes the Eyesis camera post-processing procedures.

Camera Output

Fig.1 Eyesis frames

• 3x 500GB HDDs (or 3x 256GB SSD HDDs), each containing *.mov files from 3x 3-sensor cameras (a single HDD is connected to a camera).
• Each frame in a *.mov file is a combination of frames from 3 sensors glued vertically.
• The cameras are numbered - 1,2,3. The sub images are [1.1, 1.2, 1.3], [2.1, 2.2, 2.3], [3.1, 3.2, 3.3]. 3.1 is the fisheye image.
• The frames in *.movs are indexed.
• Single frame format is JP4.
• Corresponding frames have the same time stamps generated by the 1st camera.
• The 1st camera frames are geotagged.

Post-Processing Setup

• HDDs are put into a processing PC and the data is copied.

Workflow

1. Processing panorama

Stitching scripts samples.

• JP4 images are extracted and converted to DNGs from *.MOVs by the program movie2dng.

• Dcraw and the Hugin tools are used for stitching (a template *.pto for it should be created once).