Request for Quote 2

Elphel, Inc. invites the machine shops to Quote manufacturing of the following parts:

Metal Parts

Part	QTY per Unit	Notes
0353-22-01 - Drive roller plate, top	1
0353-22-02 - Drive roller plate, bottom	1
0353-22-03 - Side plate	1
0353-22-04 - Support plate	2
0353-22-05 - Bracket / Spacer	3
0353-22-06 - Idler arm	1
0353-22-07 - Shaft bracket	2
0353-22-08 - Counterweight shaft mount	1
0353-22-09 - Counterweight mount bracket	2
0353-22-10 - Counterweight mount	1
0353-22-11 - Cradle rail	3	MAKE in USA
0353-22-12 - Vertical_mount	1	MAKE in USA
0353-22-121 - Vertical_mount pipe	1	MAKE in USA
0353-22-122 - Horizontal mounts, opposite	2	MAKE in USA
0353-22-123 - Horizontal mount	2	MAKE in USA
0353-22-123 - Horizontal mount	2	MAKE in USA
0353-22-13 - Top hub	1
0353-22-14 - Worm mount	1
0353-22-15 - Motor mount plate	1
0353-22-16 - Worm end plate	1
0353-22-17 - Counterweight rail	1	MAKE in USA
0353-22-18 - Bottom rollers bracket	2
0353-22-19 - Half elbow	6
0353-22-20 - Roller run	1
0353-22-21 - Roller run insert	2
0353-22-22 - Idler shaft, bottom	6
0353-22-23 - Drive roller shaft	2
0353-22-24 - Shaft adjustable roller	1
0353-22-25 - Shaft horizontal	1
0353-22-26 - Shaft spacer, long	1
0353-22-27 - Shaft spacer, short	1
0353-22-28 - 1.22x1.5.22 Worm	1
0353-22-29 - 8" Worm gear	1
0353-22-30 - Tube coupling	3
0353-22-31 - Leg, bottom	3	MAKE in USA
0353-22-32 - Leg, diagonal	3	MAKE in USA
0353-22-33 - Counterweight	1	MAKE in USA

Notes: The Quote is requested for all parts except the parts, marked "MAKE in USA".

The Quote is requested for the Quantity needed for 1 Unit.

Please, read the Suppliers Terms and Conditions and send the Proposals by e-mail: supplies@elphel.com