Ezynq

Decription

Ezynq project is started to create a bootloader for systems based on the Xilinx Zynq SoC without the inconvenience of the non-free tools and/or files. The goal is not just to "free" the code, but to provide users with the higher degree of flexibility in fine-tuning of the configuration parameters.

"Free" the code part

as of 2014/02/23...

Ezynq addresses the potential legal problems with distribution of a product/software based on Zynq platform:

• FSBL is under Xilinx's copyright
• The current (2014/02/23) official SPL implementation in the u-boot-xlnx master-next 54fee227ef141214141a226efd17ae0516deaf32 branch is FSBL-less but it requires to use the files (ps7_init.c/h) that come under Xilinx's copyright which makes u-boot noncompliant with its GPL license.

as of 2016/01/13...

• For a new board you still have to run an extra Xilinx program to generate ps7_init.c/h.

as of 2016/03/18...

• u-boot-xlnx master-next branch is removed long ago - so the link above is broken

Supported boards

Board	Chip	Manufacturer	Tested?
MicroZed	Zynq 7Z010	Avnet	Y
ZC706	Zynq 7Z045	Xilinx	N
ZedBoard	Zynq 7Z020	Digilent/Avnet	N
10393	Zynq 7Z030	Elphel	Y

Output

• boot.bin (SPL) - loads u-boot.img, no FSBL needed.
• u-boot-dtb.img (u-boot image)

Boot: Copy them to SD card in order to boot from it.

Build

For instructions please follow this guide.