Eyesis4Pi 393 User Guide - Firmware Update

From ElphelWiki
Revision as of 09:57, 28 April 2017 by Oleg (talk | contribs) (→‎Update)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Update

1. Boot from micro SD 

Connect all cams USBs to PC
Follow these instructions to boot.

2. http://192.168.0.161/update_software.html 

upload rootfs.ubi and uImage only, flash

3. mount 

ssh root@192.168.0.161
ubiattach /dev/ubi_ctrl -m 4
mount -t ubifs /dev/ubi0_0 /mnt/ubi

4. edit 

nano /mnt/ubi/etc/init.d/init_elphel393
#set \"eyesis\":1
CTRL-X
CTRL-Y, ENTER
sync

5. if there's a need, update ip in /etc/elphel393/init_elphel393.py

6. unmount 

umount /mnt/ubi

7. repeat 2.-6. for 162 & 163

Retrieved from "https://wiki.elphel.com/index.php?title=Eyesis4Pi_393_User_Guide_-_Firmware_Update&oldid=15431"