Elphel camera parts 0393-27

Elphel NC393 series camera parts

All parts on this page were prepared for 3D printing. Some of them have support elements manually place in most critical parts, so you do not need to enable support elements in your slicer software. All those elements can be easily removed after printing. We used Ultimaker2 with 0.4 mm nozzle for 3D printing all of these parts and achieved good results with 0.7 mm wall thickness and 20% infill density. We posted some examples of 3D printed parts on our blog

One of the parts below, 0393-27-07, is a helper object. It was specifically created for cutting out of SFE mount place in custom designs.

0393-27-01f - C/CS SFE adapter

3d (stl)   3d (step)   2d (dxf)   2d (pdf)	Copyright © 2024 Elphel Inc., Licensed under [1], GNU FDL v.1.3

---

0393-27-02d - Adapter for camera body

3d (stl)   3d (step)   2d (dxf)   2d (pdf)	Copyright © 2024 Elphel Inc., Licensed under [2], GNU FDL v.1.3

---

0393-27-03c - Support frame adapter

3d (stl)   3d (step)   2d (dxf)   2d (pdf)	Copyright © 2024 Elphel Inc., Licensed under [3], GNU FDL v.1.3

---

0393-27-04 - Cable strain relief for 0393-27-03c

3d (stl)   3d (step)   2d (dxf)   2d (pdf)	Copyright © 2024 Elphel Inc., Licensed under [4], GNU FDL v.1.3

---

0393-27-05 - Cable strain relief for 0393-27-01f

3d (stl)   3d (step)   2d (dxf)   2d (pdf)	Copyright © 2024 Elphel Inc., Licensed under [5], GNU FDL v.1.3

---

0393-27-06 - Cable strain relief for 0393-27-03c

3d (stl)   3d (step)   2d (dxf)   2d (pdf)	Copyright © 2024 Elphel Inc., Licensed under [6], GNU FDL v.1.3

---

0393-27-07 - SFE cutout part

3d (stl)   3d (step)   2d (dxf)   2d (pdf)	Copyright © 2024 Elphel Inc., Licensed under [7], GNU FDL v.1.3

---

0393-27-08a - SFE adapter

3d (stl)   3d (step)   2d (dxf)   2d (pdf)	Copyright © 2024 Elphel Inc., Licensed under [8], GNU FDL v.1.3

---

0393-27-09 - SFE adapter

3d (stl)   3d (step)   2d (dxf)   2d (pdf)	Copyright © 2024 Elphel Inc., Licensed under [9], GNU FDL v.1.3

---

0393-27-10 - Cable strain relief for 0393-27-03c or 0393-27-02d

3d (stl)   3d (step)   2d (dxf)   2d (pdf)	Copyright © 2024 Elphel Inc., Licensed under [10], GNU FDL v.1.3

---

0393-27-12 - SFE support platform for press fit kit

This platform facilitates disk springs support pins installation into SFEs.

3d (stl)   3d (step)   2d (dxf)   2d (pdf)	Copyright © 2024 Elphel Inc., Licensed under [11], GNU FDL v.1.3

---

0393-27-13 - Tube cap

3d (stl)   3d (step)   2d (dxf)   2d (pdf)	Copyright © 2024 Elphel Inc., Licensed under [12], GNU FDL v.1.3

---

0393-27-14 - Mount band

This band is used to mount additional parts on top of NC393 camera. One of the possible parts is 0393-27-15 for IMU mount.

3d (stl)   3d (step)   2d (dxf)   2d (pdf)	Copyright © 2024 Elphel Inc., Licensed under [13], GNU FDL v.1.3

---

0393-27-15 - IMU support plate

This plate is used in combination with 0393-27-14.

3d (stl)   3d (step)   2d (dxf)   2d (pdf)	Copyright © 2024 Elphel Inc., Licensed under [14], GNU FDL v.1.3

---

0393-27-16 - Calibration SFE housing

3d (stl)   3d (step)   2d (dxf)   2d (pdf)	Copyright © 2024 Elphel Inc., Licensed under [15], GNU FDL v.1.3

---

0393-27-17 - Cable strain relief for calibration SFE housing

Used with 0393-27-16.

3d (stl)   3d (step)   2d (dxf)   2d (pdf)	Copyright © 2024 Elphel Inc., Licensed under [16], GNU FDL v.1.3

---