-
...anually or using the script) you may get to the top working directory ( by default it is called "elphel353" and has subdirectories starting with "apps") and r
...'CVS' directory from the top directory of the project ('elphel353/CVS' by default), you do not need to remove CVS in subdirectories. Then re-run
11 KB (1,720 words) - 16:36, 17 March 2020
-
...ver in the root directory, http://192.168.0.9/ if you have not changed the default address.
2 KB (398 words) - 17:32, 30 May 2016
-
0 RGB24 (default)
4 KB (523 words) - 17:49, 19 September 2008
-
...is reachable using http://192.168.0.9/ my proposal would be to change the default to DHCP, with a timeout and zeroconf or fixed address. Next to this the cam
306 bytes (49 words) - 12:03, 5 September 2008
-
3. "Detect sensor on channel 0" (after configuration channel 0 is set by default).
3 KB (363 words) - 19:15, 6 December 2009
-
In installed the compiler to the default location at: /usr/local/cris/ so the command to compile the server is (for
'''*camera_ip*''' is - surprise - the IP of your camera (192.168.0.9 by default)
8 KB (1,216 words) - 03:16, 29 November 2008
-
telnet 192.168.0.9 #(If the default IP hasn't been changed. Or you can connect via 'ssh' using [http://www.chi
3 KB (438 words) - 11:09, 4 June 2012
-
card 0: default [USB AUDIO ], device 0: USB Audio [USB Audio]
3 KB (412 words) - 02:07, 23 November 2010
-
| By default, we install an IR-cut filter. At your request, we can remove the filter for
5 KB (741 words) - 09:23, 14 July 2020
-
...rmin.com/shop/shop.do?pID=6445#gps18 Garmin GPS18] is the model we sell by default with our GEO cameras.
856 bytes (134 words) - 09:45, 28 June 2010
-
* UI: Problem with first access to camera form FireFox. By default popup blocker enabled. --[[User:Kimstik|Kimstik]] 07:48, 6 April 2009 (CDT)
471 bytes (66 words) - 13:09, 9 April 2009
-
* optional "test" checkbox (and the default state of this checkbox). When enabled the camera compressor will start befo
** include the current parameter value as the default in the input field(s)
6 KB (926 words) - 11:52, 21 December 2016
-
...- local IP of the reflashing station, must be at subnet 192.168.0.0 (by default "192.168.0.0")
...currently) exported NFS directory where firmware of the camera placed (by default "/nfs/elphel353-2.10")
13 KB (2,211 words) - 11:40, 31 March 2010
-
The default camera IP address is '''192.168.0.9'''* ("ping -b 192.168.0.255" if it acc
...connected cameras and connect to them. Mind you, with the live distro the default IP address (192.168.0.9) should work. From the camera's homepage, go to Sys
6 KB (980 words) - 13:13, 11 February 2016
-
...hat you can manually set your IP to match the [http://192.168.0.9 camera's default]:
Camera default ip:
2 KB (250 words) - 15:24, 20 May 2009
-
...y the original at the end. Note that OpenCV stores images in BGR format by default.
7 KB (1,124 words) - 02:56, 27 July 2010
-
* Include application to the default firmware package
* The default boot option - power on.
7 KB (1,061 words) - 12:22, 1 June 2022
-
The default value is "0x40" which means averaging binning mode.
4 KB (530 words) - 15:56, 25 January 2011
-
...posure will be used for time stamping (exposure time earlier). This is the default mode to prevent recorded frame period jitter caused by automatic exposure a
5 KB (810 words) - 16:39, 21 March 2018
-
| Default value
19 KB (2,929 words) - 15:00, 14 July 2010
