-
...ogram (0x200-0x27f for odd/all exposures, 0x280-0x2ff - for even ones) and if it is empty - programs default sequence (will not change existent sequence)
...to process the incoming sensor data you do not need to use ccam.cgi - only if any of the parameters above need to be changed, Later we'll develop new sof
13 KB (2,170 words) - 13:21, 30 October 2008
-
...n/hdparm -m 0 -c 1 -d 0 /dev/hda) and mounts /dev/hda1 on the filesystem. If we do not disable DMA, then the kernel just endlessly loops on dma timeouts
...ral HDDs (no CF yet) and they worked fine (to be honest I even do not know if the DMA is enabled) - the recording speed for large files was around 15MB/s
9 KB (1,579 words) - 21:04, 5 June 2008
-
1852 if ((vp=paramValue(gparams, "iq"))) ioctl(devfd, _CCCMD(CCAM_WPARS , P_QUALI
...make this value as close as possible to the one specified by application, if the application passed the invalid value driver will use the corrected one.
6 KB (980 words) - 00:43, 17 October 2007
-
...rent cable length you may see image that looks like monochrome or purple - if the pixels are sampled at wrong time, red and green (also green and blue) p
Open the following URL in the browser (replace 192.168.0.9 if camera has different IP):
9 KB (1,508 words) - 15:06, 1 May 2022
-
..."1" for high level (near 3.3V) and "0" for low level (near zero volts), so if the signal is defined as output and set to output "1" it will read "1", unl
...he devices can read back) will be "1" if any of the outputs is "1" and "0" if all are "Z". Similarly it is possible to make a "wire-AND" by connecting ("
9 KB (1,380 words) - 01:36, 21 October 2007
-
...d to set "Program ahead" parameter to 5 instead of it's default value - 3. If not the camera freeze after the first frame.
935 bytes (148 words) - 06:44, 19 July 2010
-
* patched busybox hdparm utility to output large sectors if invoked as "hdparm -I"
Broken release, please remove it if you downloaded it during half-day it was posted @ SourceForge
32 KB (4,592 words) - 16:14, 26 September 2014
-
...in the GET request as well as the script name. Script uses default values if the parameters ("NFS=" and "SCRIPT=") are not specified.
The script returns XML response with error message or status OK if it went as far as starting remote script on NFS server. After that response
1 KB (216 words) - 01:18, 22 April 2009
-
If I change sensor parameters (WOI, exposure, quality, etc.) I must stop the
if (fd != -1)
7 KB (1,046 words) - 12:06, 12 November 2007
-
= This is the sandbox. If you're new to Media-wiki systems, please edit here first =
212 bytes (29 words) - 03:53, 8 December 2010
-
...operations on the HDD will not cause the frame loss - that can be verified if the Exif headers are enabled - regardless of the format selected each frame
Eventually camogm will be started (and restarted if needed) automatically at boot time, now it is started manually with the com
24 KB (3,768 words) - 14:39, 11 July 2021
-
And i get a normal video (i mean not a timelapse). If i look to the status i see: timescale 1.000000
2 KB (398 words) - 08:41, 17 April 2008
-
to upgrade if we continue to maintain [[User_Documentation]]
109 bytes (15 words) - 12:34, 25 November 2007
-
to upgrade if we continue to maintain [[User_Documentation]]
109 bytes (15 words) - 12:35, 25 November 2007
-
here is a preliminary design for lower of parts of future camera body. if necessary, it can be used as a board holder for the multi_10353 application
If so, another choice is to change current one-piece body tube to two-half one
2 KB (395 words) - 03:49, 28 November 2007
-
...ddress has been configured the script exits and thus needs to be restarted if the address is to be reconfigured.
The unit responds to the ping in the examples above if the new address was configured. Note, this method(ARP/ping mehtod above) on
4 KB (575 words) - 16:13, 24 October 2018
-
...p://192.168.0.9/var/''' in the web browser) - recommended for experiments, if something goes wrong you can just power-cycle the camera and all your chang
...mbers, not strings - you may want to use $value+0 (instead of just $value) if $value may be a string (i.e. passed from _GET[])''--[[User:Andrey.filippov|
36 KB (5,115 words) - 06:00, 8 February 2012
-
if it will be used to compile computer, restart which is not desirable and dis
knoppix# dd if=/dev/zero of=swapfile bs=1024 count=1024M
3 KB (450 words) - 07:59, 6 December 2007
-
Julia, that works, so if you post specific questions related to Circular buffer usage (not covered i
289 bytes (40 words) - 23:33, 9 January 2008
-
Do you use Ubuntu GNU/Linux distribution ? If you use the 7.10 (last version) it will be really simple to add support for
6 KB (858 words) - 10:34, 18 March 2008
